NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2642SMB1MUF1 to RSR2642SMB1MUF1.

Omega National 42 Inch Maple Signature Hood Use

Omega National 42 inch maple range hood describes a 42 inch wide Signature arched raised panel wall mount range hood built from maple, so it gives a wood focal point sized for standard 42 inch cooking runs. The product is part of Omega National Products wood range hoods, which ties it into a coordinated line for kitchen and bath cabinet layouts that use wood hoods. The hood is described as a complete turnkey wood range hood system, which means the core hood body, a liner, hanging hardware, and ventilation and chimney choices are organized as a single working system for a wall mount range location. The product is made in the USA, which matters to shops and installers that source domestic wood components for consistency and project requirements. The hood is supplied unfinished in maple, so it can be finished on site to match or coordinate with surrounding cabinetry colors and sheens.

Key Wood Hood Details For Project Planning

• The hood is described as 42 inches wide Signature arched raised panel, which sets the face design and span so cabinet runs, wall cabinets, and trim can be laid out accurately around a defined centerline.
• The product is a wall mount range hood in the wood range hoods category, so it is intended to mount to the wall over a cooking surface and visually tie into adjacent wall cabinetry and moldings.
• The hood is built from maple and is available as one of 5 unfinished wood species, so finishing shops can stain, paint, or clear-finish to match existing maple programs or other wood species in the line.
• The system is described as a complete turnkey wood range hood with hood, liner, hanging hardware, and ventilation choices, so designers can specify a single part number to cover the hood body and integrated liner needs.
• Ventilators are described separately from the hood, with 2 units to choose from at 390 CFM and 250 CFM, so airflow selection can be matched to cooking equipment and local expectations while keeping the hood body constant.
• The hood line is available in 30, 36, 42, and 48 inch widths, so runs of different lengths or multi-plot projects can stay in the same Signature arched style while stepping up or down in width.

Wall Mount Installation And Hanging Method

The Signature arched raised panel hood is identified specifically as a wall mount range hood, so it is intended to fasten to a wall above the cooking area in coordination with base and wall cabinet placement. The product description calls out a simple installation featuring a patented French cleat hanging method, which means the hood body is designed to hang on a mating cleat for easier alignment and load transfer while it is secured in position. The presence of hanging hardware in the system description means that the hood, cleat approach, and wall interface are coordinated as a single hanging method, which can speed layout and reduce on-site improvisation. The matching silver metallic liner ties into this installation because it is formed to sit within the hood body while providing a defined cut-out zone for the specified ventilators.

Range Hood System Use In Real Installations

Where This Wood Range Hood System Fits

The Omega National 42 inch maple range hood is described as a wall mount range hood in the wood range hoods category, so it is suited for kitchen layouts where the cooking equipment is against a wall and surrounded by wall cabinets. The Signature arched raised panel design in maple positions the hood as a visible feature piece, which matters on projects where the hood is intended to read like custom cabinetry rather than metal equipment. The hood is one width option in a line that also offers 30, 36, and 48 inch choices, so multi-unit or staggered-kitchen jobs can keep the same Signature arched profile while adjusting width to match each cooktop or range. Because the hood is described as unfinished maple and part of a group with 5 unfinished wood species, finishing shops and installers can sequence sanding, staining, or painting alongside cabinet finishing, keeping sheen and color alignment across doors, face frames, and the hood.

Details That Support Repeatable Installation Results

The turnkey wood range hood system language indicates that the hood, liner, hanging hardware, and ventilation choices are organized to work together, which simplifies repeated installations across several kitchens using the same configuration. The simple installation featuring a patented French cleat hanging method gives installers a repeatable way to hang the hood body, since the cleat style allows the hood to be lifted onto a mating piece rather than held completely in place by hand while fasteners are driven. The silver metallic liners are described as featuring a cut-out that accommodates Broan NPRHVBB20SM 390 CFM and NPRHVBF10SM 250 CFM ventilators, so the liner opening is already sized and located for these two ventilator units, reducing layout and cut errors. The description also notes that ventilators are not part of the hood system, so shops can standardize on either the 390 CFM or 250 CFM Broan-compatible ventilators depending on the cooking equipment they specify. The note that the chimney shown is sold separately signals that the visible extension above the hood can be selected by size, so wall and ceiling heights can be addressed by ordering a chimney appropriate to each job. Because the hood is made in the USA, production and material sourcing are aligned with domestic woodworking expectations, which supports longer-running programs that depend on consistent components over time.

Common Questions About This Omega National Hood

Select This Hood For Coordinated Maple Installations

The Omega National 42 inch maple range hood combines a Signature arched raised panel design, a wall mount configuration, and an unfinished maple construction, so it fits projects calling for wood cabinetry styling over a 42 inch range. The complete turnkey wood range hood system description, with liner, hanging hardware, and ventilation choices organized together, shortens product selection for repeat jobs. The simple installation featuring a patented French cleat hanging method offers a defined approach to hanging the hood body, which is useful on production runs or multi-unit projects. For projects where domestic sourcing is important, the made in the USA description aligns this hood with other North American wood components, supporting consistent long-term use.