NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR3048SMB1MUF1 to RSR3048SMB1MUF1.

Omega Maple Wall Range Hood For Custom Kitchens

Omega National 48 inch maple artisan range hood is a wall mount wood range hood designed to give a custom look that compliments most any kitchen while staying in a standard cabinet workflow. The 48 inch width matches typical cooking layouts, so the hood spans the cooking surface cleanly and visually anchors the wall run. Maple construction pairs well with many cabinet finishes, which helps the hood blend into both light and medium-tone designs on the same wall. The top 12 inch of the hood can be trimmed back, allowing field adjustment to match ceiling height or upper cabinet lines so the hood ties into surrounding moldings. As part of Omega National Products artisan series, the hood is built as a wood range hood for kitchen and bath cabinet installations that call for a furniture-style focal point over the range.

Turnkey Hood System Features That Save Time

• The product is described as a complete turnkey wood range hood system, which means the hood and its components are coordinated from the factory so the installer works with a matched setup instead of piecing parts together on site.
• It is a wall mount wood range hood, so it is intended to mount to the wall over the cooking surface, keeping the installation aligned with standard wall cabinet framing and typical stud layouts.
• The design is described as elegant and providing a custom look that compliments most any kitchen, so it functions both as ventilation structure and as a visual anchor tying in with surrounding cabinets.
• The top 12 inch of the hood can be trimmed back, which gives the installer some flexibility when aligning the hood with soffits, tall cabinets, or varying ceiling heights without redesigning the run.
• The system uses silver metallic liners that feature a cut-out for specified ventilators, so the metal surface defines the actual vent opening and helps standardize the interface between the wood shell and the ventilation unit.

Wall Mount Hood Fit, Liner Design, And Installation

This Omega National wood range hood is designed as a wall mount unit, so it anchors to the wall structure in the same plane as adjacent wall cabinets. The simple installation is supported by a patented French cleat hanging method, which lets the installer hang the hood by engaging matching cleats rather than supporting the full weight by hand during fastening. That hanging method can reduce handling steps because the hood seats onto the cleat as a single motion. The silver metallic liner inside the hood has a defined cut-out, so the opening for the ventilator is preset for the specified Broan units and does not require layout from scratch.

Using The 48 Inch Omega Hood In Real Projects

Where This 48 Inch Maple Hood Fits Best

This 48 inch Omega National maple artisan series wall mount range hood is suited for kitchen layouts designed around a 48 inch cooking zone, providing full-width coverage above the range or cooktop. The hood is part of a broader line that is available in 36 inch, 42 inch, and 48 inch widths and in 5 wood species, so this 48 inch maple version fits projects where maple cabinetry is used and a wider appliance opening is planned. Made in the USA, the hood aligns with projects that prioritize domestic wood components in the cabinet package. Because the design is described as elegant and providing a custom look that compliments most any kitchen, it can be used in both traditional and transitional cabinet runs where a furniture-style hood is a design requirement.

Details That Support Repeatable Installation Results

The simple installation with the patented French cleat hanging method helps the installer set the hood at the correct height and alignment before final fastening, which is especially useful when tying the hood into adjacent wall cabinets and crown. The top 12 inch of the hood can be trimmed back, so the installer can fine-tune the overall height to meet ceiling conditions or to align with surrounding cabinet tops, reducing the need for separate build-ups. Silver metallic liners are part of the system and feature a cut-out that accommodates Broan NPRHVBB20SM at 390CFM and NPRHVBF10SM at 250CFM ventilators, both described as sold separately, so the metal liner defines the interface for those ventilators and keeps the wood structure clear of the cut-out zone. The liner is compatible with those Broan ventilators, which simplifies selecting a ventilation unit that will match the pre-formed opening. The hood and liner are presented together as a complete turnkey wood range hood system, which helps keep the wood shell and liner dimensions coordinated from the factory. The product is categorized under wood range hoods and kitchen and bath cabinet accessories, which reflects its role as part of the cabinet package rather than a separate appliance shell.

Common Questions About This Omega National Hood

Selecting This 48 Inch Hood For Your Project

This Omega National 48 inch wall mount maple artisan series wood range hood with Broan compatible silver metallic liner is built as a complete turnkey wood range hood system for kitchen and bath cabinet projects. The trim-capable top 12 inch, French cleat hanging method, and preset liner cut-out for specified Broan ventilators give installers practical tools for fitting the hood into real wall cabinet layouts. For cabinet shops and remodelers planning a 48 inch cooking zone in maple, this hood and liner system offers a coordinated wood focal point that aligns with standard wall mounting and ventilation practices.