NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR3048SMB1CUF1 to RSR3048SMB1CUF1.

Omega National 48 Inch Cherry Wall Range Hood

Omega National 48"W Cherry Artisan Series Wall Mount Range Hood gives a kitchen a custom wood hood look while housing compatible ventilation. The 48 inch width spans standard cooktop areas, which helps capture rising cooking fumes across a wider surface. The cherry construction provides a wood appearance that aligns with wood cabinetry, important when jobs call for a coordinated kitchen design. This hood is part of the Artisan Series, so its styling is designed to complement most any kitchen, reducing design conflicts on remodels. The unit is made in the USA, which matters on projects that specify domestic wood products. The hood system is classified as a wood range hood, so it fits directly into wood cabinetry planning rather than metal hood layouts. The design is intended for wall mounting, supporting straightforward placement over ranges against wall cabinets.

Key Wood Range Hood Details For Projects

• The elegant design provides a custom look that complements most any kitchen, which lets installers match the hood to a variety of cabinet door styles without reworking the overall design.
• The top 12 inches of the hood can be trimmed back, giving flexibility to adapt hood height to existing soffits or ceiling conditions while keeping the main profile consistent.
• The product is a complete turnkey wood range hood system with hood and liner, so installers can plan a single integrated hood-and-liner solution for the opening.
• Silver metallic liners feature a cut-out that accommodates Broan NPRHVBB20SM (390CFM) and NPRHVBF10SM (250CFM) ventilators, which simplifies aligning blower placement with the liner opening.
• The hood is available in multiple widths and five wood species, which supports matching across several cabinet runs or different elevations within the same kitchen project.

Installation And Mounting Details For This Hood

This Omega National 48"W Cherry Artisan Series Wall Mount Range Hood uses a patented French cleat hanging method, so the installer lifts the hood onto the wall-mounted cleat instead of holding it in final position while fastening. That approach helps when working alone or in tight kitchens because the cleat carries the weight while final alignment adjustments are made. The top 12 inches can be trimmed back, which allows the hood height to be tailored to ceiling lines, decorative trim, or crown layouts without rebuilding the entire hood. The silver metallic liner has a cut-out sized for Broan NPRHVBB20SM and NPRHVBF10SM ventilators, so the ventilator location is defined by the liner opening, reducing layout guesswork. This wall mount configuration lets the unit integrate into standard cabinet plans.

Using This Cherry Artisan Series Hood On Jobs

Where This Wood Range Hood Works Best

This Omega National 48"W Cherry Artisan Series Wall Mount Range Hood is designed for kitchens that require an elegant, custom-style wood hood over a wall-mounted range or cooktop. The 48 inch width suits wider cooking surfaces or ranges centered on a run of base cabinets, giving coverage that helps capture steam and smoke over more burners. The cherry wood construction ties directly into cherry cabinetry programs, which is useful on jobs where door styles, moldings, and hoods must share the same wood species. Because the design complements most any kitchen, it can be specified for both new installations and remodels without clashing with surrounding finishes. Its classification as a wood range hood places it into cabinet elevations like a furniture piece rather than an appliance shell, giving designers flexibility in how they integrate it into drawings.

Details That Support Repeatable Range Hood Installs

The patented French cleat hanging method on this Omega National wood range hood creates a predictable installation sequence: the cleat is fixed to the wall, then the hood body hangs on that cleat for final positioning. That method helps keep the hood square and level relative to upper cabinets, reducing rework caused by sagging or misaligned fasteners. The ability to trim back the top 12 inches allows installers to adapt a standard hood to variable ceiling heights, beams, or existing soffits, which can simplify field adjustments when site conditions differ from drawings. The silver metallic liner, matched with cut-outs for Broan NPRHVBB20SM (390CFM) and NPRHVBF10SM (250CFM) ventilators, establishes a defined opening for those ventilators, which helps align duct transitions and keep blower placement consistent from job to job. As a complete turnkey wood range hood system with hood and liner, it lets designers and installers work with a matched pair rather than coordinating separate hood and liner sources. Being made in the USA supports projects that prioritize domestic manufacturing for wood components, which can be significant on commercial or specified residential work.

Common Questions About This Omega National Hood

Select This Hood For Cherry Wall Range Layouts

The Omega National 48"W Cherry Artisan Series Wall Mount Range Hood with silver metallic liner provides a coordinated wood hood and liner solution for wall-mounted ranges. The French cleat hanging method, trim-to-fit top 12 inches, and Broan-compatible liner cut-out support efficient layout and installation in real kitchen conditions. The cherry wood construction and Artisan styling align with kitchens that call for a custom wood hood look. For projects needing a 48 inch cherry wall hood with defined liner and ventilator opening, this unit offers a single-source hood-and-liner system.