Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Domi snap-on 2-cam mounting plate is a die-cast steel, straight 0mm hinge mounting plate from Salice America that provides a fixed baseline height for your hinge layout, which helps keep door reveals predictable across a run of cabinets. The slim style hinge mounting plate design supports compact hardware layouts, which is useful when working in tight face-frame or frameless cabinet situations where space around the hinge arm is limited. Nickel-plated, corrosion-resistant construction protects the die-cast steel body, which matters anywhere hinges are exposed to normal shop humidity or jobsite conditions over time. The screw-on cabinet side attachment method with #6 x 5/8 inch wood screws gives a familiar installation approach, which allows installers and experienced DIY users to work with standard bits and drivers already used on other cabinet hardware jobs.
The cabinet side attachment method on this Salice Domi hinge mounting plate uses open holes for #6 x 5/8 inch wood screws, which lets you position the plate directly over pre-marked centers and drive the screws in a single step. The straight 0mm plate format establishes the hinge reference line at the cabinet surface, which simplifies layout when doors share a common reveal. Height adjustment by eccentric cam plus or minus 2 mm provides fine vertical tuning on each hinge position, which helps bring door tops and bottoms into line after the screws are set. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm gives additional in-out control, which is helpful when aligning the door plane with adjacent fronts on built-ins or kitchens.
This hinge mounting plate belongs to the Salice "Domi" slim style family of hinge mounting plates, which means it is designed as part of a hinge system where space efficiency and adjustability matter. The straight 0mm design suits cabinet layouts where the mounting plate should not add height offset between the hinge arm and the cabinet side, which helps when a design or drilling pattern assumes zero plate height. Die-cast steel construction gives the mounting area a rigid foundation under the hinge arm, which supports repeatable door action on frequently used cabinet doors in kitchens, baths, or shop fixtures. The nickel-plated, corrosion-resistant finish is suited for typical indoor woodworking environments, which keeps the visible and contact surfaces of the plate protected during the service life of the cabinet.
Height adjustment by eccentric cam plus or minus 2 mm is built into the plate, which allows installers to shift the door slightly up or down without changing the screw locations, saving time during final alignment. This eccentric cam mechanism concentrates the adjustment at the mounting plate, which helps achieve straight door lines even when the cabinet boxes are slightly out of square. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm works at the same interface, which lets you pull the door closer to the cabinet or move it outward to match neighboring doors. Because both height and depth corrections happen through cams on the plate itself, a single hinge location can compensate for small drilling or construction variations, which reduces rework and keeps hinge adjustments organized at the plate level.
The BAP3R09 is a Salice "Domi" slim style hinge mounting plate, which serves as the interface between the cabinet side and the hinge arm in a hinge system.
The 0mm straight mounting plate keeps the hinge reference height at the cabinet surface, which simplifies planning for door reveals based on drilling patterns assuming zero offset.
The mounting plate offers height adjustment by eccentric cam plus or minus 2 mm, which allows fine vertical tuning of cabinet doors after the plate is secured.
Depth adjustment by eccentric cam ranges from 0.5 mm to plus 2.8 mm, which lets you move the door in or out to match adjacent fronts or correct small drilling differences.
The hinge mounting plate uses open holes for #6 x 5/8 inch wood screws on the cabinet side, which supports direct screw fastening into common cabinet materials.
The nickel-plated, corrosion-resistant finish protects the die-cast steel mounting plate, which helps maintain a smooth hinge interface in indoor cabinet environments.
The Salice America Domi snap-on 2-cam adjustable straight mounting plate with 0mm height, die-cast steel construction, and nickel-plated, corrosion-resistant finish offers a defined hinge baseline with built-in height and depth cams for fine tuning. The screw-on cabinet side attachment using open holes for #6 x 5/8 inch wood screws supports standard cabinet construction methods, while the slim style keeps hardware clearances tight and efficient. For projects using Salice Domi slim style hinge layouts where a straight 0mm plate and adjustable cams match the design intent, this mounting plate aligns the hinge system with the cabinet structure for repeatable door alignment.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  UBBAP3R29 Mfr# BAP3R29 | Domi 2-Way Cam Adjustment In-Line Mounting Plate, Nickel-Plated, Screw-On, 2mm | ||||
Sold in: 1 Each |  UBBAP3R39 Mfr# BAP3R39 | Domi Snap-On 2-Cam Adjustable Straight Mounting Plate, Nickel-Plated, Screw-On, 3mm |