Domi Snap-On 2-Cam Adjustable Straight Mounting Plate, Nickel-Plated, Screw-On, 3mm

Domi Snap-On 2-Cam Mounting Plate Use

Domi snap-on 2-cam mounting plate gives you a Salice America hinge base that ties slim style Domi hinges to the cabinet, so you get a stable connection between door and case for precise cabinet work. This straight hinge mounting plate is built from die-cast steel, which provides a solid base under the hinge arm so alignment stays consistent during normal cabinet use. The 3mm plate height sets the hinge-to-cabinet relationship, so you can match your hinge geometry and maintain the reveals you are planning across a run of doors. A nickel-plated, corrosion-resistant finish protects the plate surface, so exposed areas in cabinet interiors hold up in typical shop and jobsite environments. As a Salice "Domi" slim style hinge mounting plate, it is designed to work within the Domi system layout, which matters when you want your drilling patterns and hardware choices to follow one standard line.

Key Mounting Plate Details For Installers

• The die-cast steel construction provides a rigid base under the hinge arm, which helps your hinge settings stay put under repeated door movement in everyday cabinet use.
• Nickel-plated, corrosion-resistant finish protects the plate in typical cabinet interiors, which matters where humidity or cleaning can otherwise attack untreated steel over time.
• The straight 3mm plate height places the hinge at a defined distance from the cabinet surface, helping you hit the clearances and overlays you expect when laying out doors.
• Height adjustment by eccentric cam of plus or minus 2 mm lets you shift the door position vertically on the case, which is useful for aligning reveals across multiple doors.
• Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm lets you move the door in and out relative to the cabinet face, which helps tune side clearances and close action.
• The cabinet side attachment open hole for #6 x 5/8" wood screws gives a common screw size and length, which fits standard cabinet side construction in many shop builds.

Screw-On Mounting And Cam Adjustments

This Salice Domi hinge mounting plate uses a cabinet side attachment method based on an open hole for #6 x 5/8" wood screws, so it fastens directly to the cabinet side with a familiar screw size. Height adjustment by eccentric cam of plus or minus 2 mm means you dial in vertical door position after mounting, which saves time compared to redrilling when reveals are slightly off. Depth adjustment by eccentric cam of 0.5 mm to plus 2.8 mm allows controlled in-and-out movement of the door relative to the cabinet front, so you can fine-tune fit against adjoining doors or face frames. As a straight 3mm plate in the Salice "Domi" slim style family, it keeps your installations consistent when you repeat the same hinge and plate combination across a project.

Using This Salice Domi Plate In Workflows

Where This 3mm Hinge Plate Fits Best

The Domi snap-on 2-cam mounting plate serves as the hinge base within the Salice "Domi" slim style hinge system, so it fits projects built around that specific hinge family. With a straight 3mm plate design, it suits layouts where the hinge arm and door geometry are specified around that plate height, supporting consistent overlay or inset arrangements that depend on a fixed base level. The cabinet side attachment method using an open hole for #6 x 5/8" wood screws ties directly into typical cabinet side materials, so it works cleanly in standard cabinet carcasses without changing drilling patterns. The die-cast steel body and nickel-plated, corrosion-resistant surface are suited to cabinet interiors in woodworking settings, where steel strength and surface protection both matter for hinge mounting areas.

How 2-Cam Adjustment Supports Alignment

Height adjustment by eccentric cam of plus or minus 2 mm gives you a built-in way to correct small layout variations, so you can raise or lower the mounted door to bring top and bottom gaps into line across a bank of cabinets. Depth adjustment by eccentric cam from 0.5 mm to plus 2.8 mm lets you shift the door toward or away from the cabinet face, which is useful for aligning doors that share a corner or centerline where small depth differences are visible. Because both adjustments are cam-based within the mounting plate, you can refine fit after the plate is secured with #6 x 5/8" wood screws, avoiding extra drilling while still achieving the reveal you want. Working as part of the Salice Domi slim style hinge system, this plate keeps your adjustment points predictable, which helps when repeating the same settings on multiple doors in production runs or detailed one-off installs.

Common Questions About This Hinge Plate

Selecting This Plate For Domi Hinges

Choosing this Domi snap-on 2-cam mounting plate gives you a die-cast steel, straight 3mm base matched to Salice "Domi" slim style hinges, so your cabinet layout, drilling, and adjustments all follow one consistent system. With cam-based height and depth adjustment built into the plate and a cabinet side attachment method using #6 x 5/8" wood screws, it supports efficient installation and straightforward fine-tuning on completed cases. For projects built around the Domi hinge family, this BAP3R39 hinge mounting plate keeps door alignment, plate height, and hinge interface aligned to the same proven pattern.