Domi 2-Way Cam Adjustment In-Line Mounting Plate, Nickel-Plated, Screw-On, 2mm

Domi 2-Way Cam Adjustment Mounting Plate Use

Domi 2-way cam adjustment mounting plate from Salice America is a die-cast steel hinge mounting plate designed for cabinet applications where precise hinge positioning is important. The slim style plate keeps hardware compact around the hinge area, which helps maintain clearance in tight cabinet interiors during layout and fitting. As part of the Salice "Domi" hinge system, this in-line mounting plate supports consistent alignment across multiple doors when the same plate is used throughout a run. The 2mm plate height establishes a known baseline between the cabinet side and the hinge arm, which simplifies planning overlay or reveal using the corresponding hinge geometry. Nickel-plated, corrosion-resistant construction protects the plate surface in typical kitchen or shop environments, which supports long-term stability of hinge adjustment. The screw-on design suits installers who prefer direct wood attachment on cabinet sides without additional mounting systems.

Key Mounting Plate Details For Cabinet Work

• The mounting plate is constructed of die-cast steel, providing a solid base under the hinge arm so hinge forces are transferred reliably into the cabinet structure during door use.
• Nickel-plated, corrosion-resistant finish protects the plate in typical cabinet environments, helping preserve smooth adjustment at the cams over years of opening and closing.
• Height adjustment by eccentric cam of plus or minus 2 mm allows fine tuning of the door position vertically, which helps align door tops and bottoms across a bank of cabinets.
• Depth adjustment by eccentric cam of 0.5 mm to plus 2.8 mm lets the hinge arm move in and out from the cabinet side, which is useful for setting door-to-face-frame or door-to-box gaps.
• The cabinet side attachment method uses an open hole for #6 x 5/8 wood screws, giving a straightforward fastening approach that fits common cabinet construction practices.
• A lifetime warranty on the mounting plate supports long-term service expectations, which is important where callbacks due to hardware failure would disrupt schedules.

Screw-On Hinge Plate Mounting And Adjustment

This screw-on Salice "Domi" mounting plate attaches to the cabinet side through open holes sized for #6 x 5/8 wood screws, so installers can work directly into cabinet material without extra brackets. The in-line mounting format organizes the hinge arm and plate along a consistent axis, which helps repeat the same layout across multiple doors. Height adjustment using an eccentric cam offers plus or minus 2 mm travel, giving practical vertical movement to bring door edges into line after the hinge arm is clipped on. Depth adjustment via a second eccentric cam ranges from 0.5 mm to plus 2.8 mm, so the door can be moved closer to or farther from the cabinet side to set reveals. Together, these adjustments provide useful flexibility during final fit without relocating the plate.

Why This Salice Domi Plate Fits Cabinet Runs

Mounting Plate Use On Cabinet Sides

This Salice America Domi mounting plate is part of the hinge mounting plates category, so it is intended to work as the interface between the cabinet side and a compatible hinge arm in cabinet assemblies. The 2mm in-line plate height defines the spacing from the cabinet wall to the hinge arm connection, which matters when calculating door overlays or inset positions using the associated hinge data. Because the cabinet side attachment relies on open holes for #6 x 5/8 wood screws, the plate can be positioned accurately on face-frame or frameless cabinet sides that accept that screw size. The slim style design keeps the plate profile narrow, which can help where multiple hinges are stacked on small doors or where interior components pass close to the hinge area. Die-cast steel construction provides rigidity at the hinge connection point, which supports repeated door movement.

Adjustment Range For Repeatable Door Alignment

The Domi 2-way cam adjustment mounting plate uses two eccentric cams to control both height and depth, so fine adjustments can be made at the mounting plate rather than re-drilling. Height adjustment of plus or minus 2 mm allows small vertical shifts after installation, which is particularly useful when aligning several doors in a continuous row or column. Depth adjustment from 0.5 mm to plus 2.8 mm gives an installer the ability to pull the door slightly toward the cabinet interior or push it outward, which helps dial in uniform reveals between doors and adjacent surfaces. Nickel plating that is corrosion-resistant helps the cams rotate smoothly over time, supporting repeatable adjustments during initial setup or later refinements. With the eccentric cam system built into the plate, door alignment can be corrected efficiently while the plate remains firmly fixed with #6 x 5/8 wood screws.

Common Questions About This Domi Mounting Plate

Selecting This 2mm Screw-On Plate For Projects

The BAP3R29 Domi 2-way cam adjustment in-line mounting plate from Salice America offers a 2mm screw-on hinge interface with defined height and depth cam ranges, so it can support precise cabinet door alignment in projects built around the Domi system. Die-cast steel construction, nickel-plated corrosion resistance, and open holes for #6 x 5/8 wood screws combine into a mounting solution matched to standard cabinet materials. For cabinet runs where consistent reveals and long-term adjustability are important, this hinge mounting plate provides a defined geometry and adjustment method that fits professional and serious DIY workflows.