Salice 12" 3/4 Extension Self-Close Epoxy Coated Euro Slides A208 Series, Unhanded Side Mount White - A208R/30.1C25XD

Salice 12 Inch Self Close Drawer Slide Use

Salice 12 inch self close drawer slide describes this A208 Series side mount Euro slide with a 12 inch length, so drawers can be sized and built around a known travel distance. The 3/4 extension design lets the drawer open most of the way, leaving some engagement in the slide, which supports stability in everyday use. Its self-closing design draws the drawer shut at the end of travel, helping drawers return to a closed position consistently. A double safety pull out stop is built into the slide, which limits over-travel and helps keep the drawer from being pulled past the track during operation. The slide is unhanded and side mount, so the same member works on either side of the drawer, simplifying layout and reducing part variation on the job.

Key Salice A208R Euro Drawer Slide Details

• The slide is part of the Salice Adar Series, so it matches other Adar Series components when a project standardizes on this family.
• Construction uses a sturdy nylon wheel for motion, which supports smooth running along the slide for typical drawer loads.
• The slide has a white epoxy finish, so it presents a clean look that blends with common light cabinet interiors.
• This A208R model provides a cam height adjustment feature of plus 1.5mm, allowing fine vertical tuning at the drawer member.
• The drawer slide is rated for 75 lb dynamic and 100 lb static load, giving clear performance limits for designing drawer size and contents.

Side Mount Drawer Slide Installation Details

This Salice side mount drawer slide is designed to be installed with #6 flat head wood screws, so screw selection and pilot hole sizing can be matched to that specification. The unhanded side mount configuration lets the same slide work on either side of the drawer, which simplifies ordering and setup at the bench. With a 12 inch length and 3/4 extension travel, cabinet and drawer depths can be coordinated so that closed and open positions line up consistently with face frames or frameless cabinet fronts. The white epoxy coated Euro slide format supports use in Euro-style drawer configurations where side mounting and guided motion are required.

Using Salice Adar Series Slides In Projects

Where This Epoxy Euro Slide Performs Well

This Salice Adar Series epoxy drawer slide exceeds ANSI Grade 1 certification for commercial applications, so it is suited to projects that expect regular use in commercial environments. The 75 lb dynamic and 100 lb static load capacity means drawers can be planned for moderate to heavier stored contents while staying within rated limits. Its 3/4 extension design provides significant access to drawer contents while still keeping part of the drawer supported inside the cabinet, which is valuable when many drawers are opened and closed daily. The white epoxy finish matches light-colored interiors commonly found in commercial and residential cabinetry, helping the hardware recede visually. Because the slide is unhanded and side mounted, it can be stocked and used across a variety of cabinet runs without separate left and right parts, which streamlines both field and shop workflows.

Why Height Adjustment And Stops Support Results

The A208R model has a cam height adjustment feature of plus 1.5mm affixed to each of the drawer members, so the drawer front height can be fine-tuned after mounting to align with adjacent fronts. This vertical adjustment range helps correct small layout or drilling variations without reworking cabinet cases or drawer boxes. The self-closing design pulls the drawer into its final position at the end of travel, which helps fronts sit consistently against the cabinet and reduces gaps in normal use. A double safety pull out stop at the end of the slide travel limits how far the drawer can be opened, which supports predictable extension and reduces the chance of drawers being pulled beyond the slide engagement during frequent operation. Together, these features help maintain alignment, motion quality, and appearance across a bank of drawers using the same Salice Adar Series slides.

Common Questions About This Salice Drawer Slide

Choose This Slide For Euro Drawer Projects

The Salice 12 inch epoxy coated Euro slide A208R/30.1C25XD combines 3/4 extension travel, self-closing action, and plus 1.5mm cam height adjustment, so drawer fronts can align cleanly and operate smoothly. Its unhanded side mount design and ANSI Grade 1 commercial certification support use across multiple cabinet runs using a single slide family. For projects that call for a white epoxy Euro slide with defined load ratings and vertical adjustability, this Salice Adar Series model provides a clearly specified option.