Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Candler pull 3 in center to center gives a defined 3 in (76 mm) mounting span, which sets consistent drawer and door hole spacing so layouts line up cleanly across a run of cabinets. The pull length of 4-3/8 in (111 mm) extends beyond the mounting points, providing extra grip area that helps users grab the handle comfortably on both narrow and wider fronts. A projection of 1-1/8 in (29 mm) stands the pull off the face, creating hand clearance that reduces knuckle contact on raised panels and applied moldings. The 3/4 in (19 mm) width creates a broad gripping surface that feels substantial in the hand while keeping the profile refined for tight reveals. Traditional feet at each end visually anchor the pull to the door or drawer, which suits both traditional and transitional cabinet styles in kitchens, baths, and built-ins.
The 3 in (76 mm) center-to-center measurement on this Amerock Candler pull sets the distance between mounting points, which aligns with a common cabinet drilling pattern to support straightforward layout using standard jigs. Overall length at 4-3/8 in (111 mm) gives a slight overhang beyond the screw points, which helps balance visual proportion on both narrow and medium-width drawers. The 1-1/8 in (29 mm) projection defines how far the pull stands off the face, leaving room for fingers to wrap behind the broad front while the door clears adjacent faces. Base dimensions of 7/8 in (22 mm) by 3/4 in (19 mm) concentrate bearing surface at each end, which distributes contact on the door or drawer front and visually frames the traditional feet detail.
The Amerock Corporation BP29349AS pull belongs to the Candler collection, which pairs its broad-faced design with traditional feet to suit decorative cabinet hardware and molding projects. The 3 in (76 mm) center-to-center dimension positions this pull well on face-frame and frameless cabinets that follow standard 3 in drilling, allowing continuity across doors and drawers. Width of 3/4 in (19 mm) keeps the profile slim enough for narrow rails while still providing visible presence on larger drawer fronts. Overall length of 4-3/8 in (111 mm) works across typical base, wall, and vanity cabinets, helping installers keep one pull size across multiple cabinet types. The antique silver finish visually supports traditional and transitional schemes where a softer metallic tone is preferred over brighter finishes.
This Candler series pull uses a defined 3 in (76 mm) center-to-center layout, which allows installers to reuse templates and drilling jigs for quick, repeatable hole placement across an entire run. Zinc die-cast material lets Amerock form the broad face and feet with tight tolerances, which helps multiple pulls line up evenly when mounted in rows. A projection of 1-1/8 in (29 mm) sets a consistent stand-off from the door or drawer surface, which helps doors swing without the users hand scraping the cabinet face. The 3/4 in (19 mm) width and 4-3/8 in (111 mm) length give a defined gripping zone that users can find by feel, which can be useful on tall pantry or utility cabinets. Base length of 7/8 in (22 mm) and base width of 3/4 in (19 mm) give predictable coverage at each attachment point, which supports a uniform look when swapping older pulls of similar footprint.
The Amerock Candler BP29349AS pull has a 3 in (76 mm) center-to-center, which matches common cabinet drilling patterns for straightforward layout and replacement work.
The pull length is 4-3/8 in (111 mm), which extends slightly beyond the mounting points to give a comfortable grip span on typical cabinet doors and drawers.
The Candler series pull projects 1-1/8 in (29 mm) from the surface, creating hand clearance that helps users grasp the pull without rubbing against the cabinet front.
The Amerock Candler BP29349AS is made from zinc die-cast, which allows detailed shaping of the broad face and traditional feet for consistent decorative hardware styling.
Each base on this pull has a length of 7/8 in (22 mm) and width of 3/4 in (19 mm), which defines the contact area against the cabinet front at each end.
The BP29349AS pull has an antique silver finish, giving a muted metallic appearance that coordinates with silver-toned decorative hardware schemes.
The Amerock Candler Series 3 in (76 mm) center-to-center antique silver pull BP29349AS ties its broad-faced design and traditional feet to a standard 3 in layout, which helps unify hardware across doors and drawers. Dimensions including 4-3/8 in (111 mm) length, 1-1/8 in (29 mm) projection, and 3/4 in (19 mm) width define how the pull will sit and feel on each cabinet front. For cabinet hardware projects that call for decorative handles and pulls in an antique silver tone, this Candler pull offers a defined size and style profile ready to specify.
Sold In: 1 Each
