Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Kreg #8 x 2" SML-C2 is a coarse-thread, washer head pocket-hole and face frame screw built for softwood, plywood, and composite panels where 1-1/2" stock or stacked members call for added thread engagement. The 2-inch length reaches deeper into the joint than standard pocket screws, pulling components together firmly without overdriving the head.
At 2 inches, this screw is the right choice when the combined material thickness of the joint exceeds what a 1-1/2-inch screw can span reliably. That includes joining doubled-up softwood members, fastening face frames to thicker cabinet boxes, and pocket-hole joinery in 1-1/2-inch pine or poplar stock. The extra thread engagement keeps the joint from working loose under regular use, which matters in cabinet doors, drawer dividers, and structural face frame assemblies that see repeated load cycles. For 3/4-inch stock joined to 3/4-inch panels, the 2-inch length also gives the thread more material to bite into compared to shorter options in the family.
Coarse threads are the correct choice for softwood, plywood, and composite panels. The wide thread spacing locks into the fibrous grain of pine and poplar and pulls out of MDF and particleboard with more resistance than a fine-thread screw would provide in the same materials. The washer head bears against the pocket wall over a wider surface area, which distributes the clamping force rather than concentrating it at a small contact ring the way a countersunk head would. Together, the thread and head work as a system that suits production cabinet shops running pine-frame boxes, furniture makers working in poplar, and installers piecing together softwood shelving assemblies. The zinc finish is appropriate for interior work in dry, climate-controlled environments. This screw is not intended for exterior or high-humidity applications.
Shops that build kitchen and bath cabinet boxes in pine or poplar, furniture makers assembling softwood frames, and contractors joining pre-built face frames to cabinet carcasses will find this screw well matched to the work. The 50-count box suits smaller shops ordering by project or woodworkers who need a reliable supply without committing to a larger quantity. The square drive pairs cleanly with the #2 bit already in most pocket-hole jig kits, so there is no additional tooling required to get started.
For 3/4-inch softwood stock, Kreg's standard recommendation is a 1-1/4-inch coarse-thread screw. The 2-inch SML-C2 is intended for thicker stock, roughly 1-1/2 inches and above, where the added length provides sufficient thread engagement in the second member. Using a 2-inch screw in thin 3/4-inch stock risks the tip breaking through the far face.
Coarse thread is designed for softwood, plywood, MDF, and particleboard. The wider thread spacing grips the softer fiber structure of these materials better than fine thread, which is optimized for dense hardwoods like maple and oak where tighter thread engagement is needed to avoid splitting.
The square recess accepts a #2 square drive bit. Most pocket-hole jig kits include a #2 square bit, so no additional tooling is needed in most setups.
Poplar is a moderately hard wood that falls between a true hardwood and a soft pine. Coarse-thread screws perform well in poplar when the stock is 1-1/2 inches or thicker and the pocket is cut correctly. For thin 3/4-inch poplar face frames where splitting is a concern, a fine-thread screw is generally the better fit.
The zinc finish on this screw is rated for dry interior use. It is not recommended for outdoor exposure, pressure-treated lumber, or high-humidity environments such as exterior carports or unconditioned spaces.
When thicker softwood stock or stacked members are in the joint, the Kreg SML-C2 2-inch coarse-thread screw gives you the reach and grip to pull the assembly together cleanly, without changing tools or swapping bit sets mid-run.
Sold In: 1 Box