Pro Value Elite II 3 inch pull is a zinc die cast handle designed for cabinet and furniture applications where a 3 inch center to center layout is already drilled. The 3 inch center to center dimension sets the screw hole spacing, which suits many standard cabinet door and drawer layouts and helps streamline replacement work on existing fronts. The overall 4-7/8 inch length gives a comfortable gripping area along the face, which supports reliable opening on wider or heavier fronts. A projection of 7/8 inch stands the pull off the surface, creating hand clearance that helps when users are wearing work gloves or have larger hands. The 1/2 inch width balances coverage on the stile or rail without crowding narrow frames, which matters on smaller doors where layout space is tight. The oil rubbed bronze finish provides a dark, traditional look that pairs with other bronze-finished decorative hardware in the same space.
The 3 inch center to center specification defines how this pull mounts, aligning with pre-bored 3 inch hole patterns on cabinet doors and drawer fronts. When existing fronts are already drilled at 3 inch spacing, this dimension lets the pull fit those locations without relocating holes. The 8-32 x 1 inch screw size establishes the threaded connection through the door or drawer material, which matters for matching to typical cabinet thicknesses and maintaining firm attachment. With a 4-7/8 inch overall length, the pull extends beyond the mounting holes enough to give leverage, which is useful on wider fronts that experience higher opening loads. The 7/8 inch projection offsets the grip from the face, allowing fingers to wrap behind the pull rather than dragging against the surface over time. Combined with the 1/2 inch width, the handle presents a slim profile while still protecting the finish around the mounting area.
The 3 inch center to center cabinet pull format works well on face frame and frameless cabinets that already rely on this common hole spacing across doors and drawers. In kitchen runs where existing pulls share a 3 inch pattern, this Elite II oil rubbed bronze pull can serve in a straightforward change-out while keeping the same drilling. The 4-7/8 inch length means the handle spans a good portion of standard drawer widths, which supports a centered grip when opening. On tall pantry or utility doors, the 7/8 inch projection creates a firm handhold without the handle feeling bulky on the stile. The oil rubbed bronze finish coordinates with other dark bronze decorative hardware in the same area, which can help unify the appearance across base cabinets, uppers, and utility storage. Because the pull body is zinc die cast, each unit retains the same shape and dimensions, which is important when aligning multiple handles in a straight visual line.
The zinc die cast construction of this Pro Value Series cabinet pull provides a stable, molded form, which helps each 3 inch center to center pull align predictably with standard boring jigs. That predictable geometry means installers can repeat drilling patterns without compensating for variation from handle to handle. The defined 8-32 x 1 inch screw size matters when passing through typical cabinet door and drawer materials, supporting a secure thread engagement at the back. With a 1/2 inch width, the handle covers the immediate area around each mounting point, which can help visually mask minor chipping at the holes while still looking proportional on narrow rails. The 7/8 inch projection is set to give just enough room for fingers behind the pull so the front surfaces experience less rubbing during daily operation. Together, the 3 inch center to center spacing, 4-7/8 inch length, and oil rubbed bronze finish create a repeatable look across a full project run, which is important when maintaining a consistent line across multiple doors and drawers.
The Pro Value Elite II 3 inch pull has a 3 inch center to center dimension, which sets the distance between mounting holes and aligns with many existing cabinet boring patterns.
The cabinet pull has a 4-7/8 inch overall length, giving a longer gripping area that helps when opening wider drawers or taller cabinet doors.
The Elite II pull is made from zinc die cast material, which creates a solid, consistent body suitable for repeated installation across multiple cabinet fronts.
The handle projects 7/8 inch from the cabinet surface, providing hand clearance behind the pull to reduce contact against the door or drawer face.
The SZELII6-ORB pull is 1/2 inch wide, giving a slim profile that suits narrow rails while still covering the area around the mounting points.
This cabinet pull uses 8-32 x 1 inch screws, which set the thread size and length for fastening through typical cabinet door and drawer materials.
The Pro Value Series Elite II 3 inch center to center oil rubbed bronze pull combines a zinc die cast body, 4-7/8 inch length, 7/8 inch projection, and 1/2 inch width to match common cabinet drilling patterns. For projects laid out on a 3 inch center to center grid, this SZELII6-ORB cabinet pull provides a defined dimension set and oil rubbed bronze finish that supports consistent appearance and hand clearance across doors and drawers.
Sold In: 1 Each
