Pro Value Elite II cabinet pull is a satin nickel handle sized for a 3-3/4 inch (96 mm) center to center mount, so it lines up with standard drilling on many cabinet and drawer fronts. The pull is made from zinc die cast material, giving a solid metal feel that helps doors and drawers open with a steady grip. Its 5-1/2 inch overall length gives fingers room to grab across the front, which supports comfortable use on both smaller doors and wider drawer faces. A projection of 7/8 inch keeps the hand away from the cabinet surface, which reduces knuckle contact during repeated opening. The 3/8 inch width presents a slimmer front profile, which can help achieve a cleaner visual line on face frames or slab drawer fronts. The satin nickel finish provides a muted metallic look that suits many cabinet styles.
The 96 mm center to center hole spacing defines the mounting pattern on the door or drawer front, so once two bores are laid out at that distance the pull aligns correctly. The 8-32 x 1 inch screw size specification identifies the thread and length commonly used to fasten through typical cabinet fronts into the pull, which supports a secure mechanical connection through the panel. The 5-1/2 inch length and 7/8 inch projection together define the pull envelope, which helps confirm clearance when placing handles near adjacent walls, appliance panels, or trim. With a 3/8 inch width across the front face, the pull keeps a lean appearance while still presenting enough edge for a steady grip in regular kitchen, bath, or shop cabinet use.
The Elite II pull with a 3-3/4 inch (96 mm) center to center dimension suits installations where that hole spacing matches the cabinet layout, keeping handles aligned across banks of doors and drawers. Its 5-1/2 inch overall length makes it a practical choice on standard kitchen and bath cabinet doors, where a longer grip can feel comfortable for repeated daily use. The 7/8 inch projection creates a usable gap between the pull and the door face, which helps hands find the handle quickly on base cabinets or wall units. The 3/8 inch wide profile keeps the pull visually restrained, which can be useful on frameless or face-frame cabinets where a clean, continuous hardware line is important. With a satin nickel finish, the pull provides a neutral metal tone that coordinates with many hinge finishes from the same space.
The defined 96 mm center to center spacing on this pull allows repeated drilling using jigs or templates set to that distance, helping rows of cabinets share the same handle position. Because the pull length is 5-1/2 inches, installers can reference door height or drawer width to place the handle consistently by sight or by measurement. The 7/8 inch projection works with the 3/8 inch width to set how far the handle stands proud of the cabinet, which matters when aligning with nearby pulls so that all handles feel the same when grabbed. The satin nickel finish keeps reflections moderated, which can ease visual alignment under task lighting along a run of upper or lower cabinets. Zinc die cast construction defines the body as a single solid metal casting, supporting a uniform feel across every pull of this model in a project.
The Pro Value Elite II cabinet pull has a 3-3/4 inch (96 mm) center to center spacing, which sets the distance between the two mounting holes on the cabinet front.
The Pro Value Elite II cabinet pull measures 5-1/2 inches in overall length, which provides an extended grip area on cabinet doors and drawers.
The satin nickel zinc cabinet pull projects 7/8 inch from the cabinet surface, creating space for fingers to comfortably grasp behind the handle.
The Elite II 96mm satin nickel pull has a 3/8 inch width across the front, giving a slim profile while still offering enough surface for a stable grip.
The SZELII10-SN cabinet handle is zinc die cast, forming a solid metal body that supports regular opening and closing of doors and drawers.
This Pro Value Series handle uses a satin nickel finish, providing a muted metallic look that coordinates with many cabinet hardware and fixture styles.
The Elite 2 pull 96mm CC satin nickel is set up for 3-3/4 inch (96 mm) center to center mounting, so it fits projects built around that common spacing. With a 5-1/2 inch length, 7/8 inch projection, and 3/8 inch width, the pull defines a clear grip size and stand-off that suits regular cabinet use. Its zinc die cast construction and satin nickel finish give a metal handle that visually matches many modern and transitional cabinet designs. For work that specifies the SZELII10-SN part or calls for a Pro Value Series Elite II profile in satin nickel, this pull delivers the defined dimensions and appearance needed for consistent installations.
Sold In: 1 Each
