Elite II oil rubbed bronze pull is a Pro Value Series handle designed for cabinets and furniture where a 3-3/4 inch (96 mm) center to center layout is required, so it fits common drilling patterns on many jobs. The pull is made from zinc die cast, which creates a solid-feeling handle that withstands repeated opening and closing in busy spaces. Its oil rubbed bronze finish provides a dark, traditional appearance that coordinates with similar bronze hinges and other decorative hardware. The pull measures 5-1/2 inches in overall length, giving hands more area to grab while keeping a compact look on doors and drawers. A projection of 7/8 inch stands the handle off the front, giving finger clearance for a secure grip. With a width of 3/8 inch, the profile stays slim, which helps when aligning multiple pulls in straight runs.
The 96 mm center to center dimension defines the mounting hole spacing, so installers can drill or reuse two holes at that distance for a precise fit. This spacing matches the 3-3/4 inch center to center size often used on cabinet doors and drawers, which helps when matching existing runs or replacing older hardware. The pull projects 7/8 inch from the surface, giving room behind it for fingers without requiring deep doors or drawer fronts. At 5-1/2 inches total length and 3/8 inch width, the handle sits neatly across common rail and stile widths, helping maintain straight visual lines when several pulls are installed in a row.
This Pro Value Series Elite II pull suits applications that use a 3-3/4 inch (96 mm) center to center pattern on cabinet doors or drawers, such as many residential and light commercial installations. The 5-1/2 inch overall length gives it enough presence for kitchen bases, wall cabinets, and bathroom vanities while staying balanced on standard door sizes. Its zinc die cast construction supports repeated gripping in high-use areas like cooking zones or utility storage. The oil rubbed bronze finish lets the pull coordinate visually with matching bronze decorative hardware throughout a room, so banks of drawers and doors can share a consistent appearance. With a 7/8 inch projection, the pull offers finger space that suits typical door and drawer thicknesses without interfering with nearby fronts.
The defined 96 mm center to center spacing helps installers line up multiple SZELII10-ORB pulls across a run of cabinets, because the measurement remains the same from piece to piece. This consistent drilling distance simplifies jig setup when boring rows of doors or drawers. The 5-1/2 inch overall length creates a repeatable reference when positioning pulls relative to door edges or drawer rails, which aids in keeping handles at the same height across a bank. A 3/8 inch width keeps the profile slim enough to sit comfortably on narrow rails, helping avoid crowding panel details. The 7/8 inch projection offers uniform stand-off from the surface, so adjacent doors open without the pulls clashing. Together with the zinc die cast build and oil rubbed bronze finish, these dimensions allow the handle to deliver the same look and feel across small and large fronts in the same project.
The Pro Value Series Elite II pull has a 3-3/4 inch (96 mm) center to center, 5-1/2 inch overall length, 7/8 inch projection, and 3/8 inch width, helping plan drilling and layout.
The SZELII10-ORB pull is made from zinc die cast, giving a solid feel in hand that suits frequent door and drawer use in typical cabinet installations.
This Elite II Series pull has an oil rubbed bronze finish, which provides a dark, traditional look that works with matching bronze decorative hardware.
The 7/8 inch projection stands the pull off the surface, giving finger clearance for a secure grip while keeping the handle from extending excessively into walkways.
This cabinet pull uses a 3-3/4 inch (96 mm) center to center drilling pattern, aligning with a common standard used on many cabinet doors and drawers.
The manufacturer part number is SZELII10-ORB, which identifies this specific Pro Value Series Elite II 96 mm oil rubbed bronze pull.
The Pro Value Series Elite II 3-3/4 inch (96 mm) center to center oil rubbed bronze pull combines a zinc die cast body, defined drilling pattern, and balanced dimensions for cabinet doors and drawers. The 5-1/2 inch length, 7/8 inch projection, and 3/8 inch width support comfortable gripping and consistent alignment across a run of fronts. The oil rubbed bronze finish ties into matching decorative hardware for unified projects. For work calling for this center to center size and look, this SZELII10-ORB pull fits straightforward cabinet and furniture installations.
Sold In: 1 Each
