KV8908 32" Full Extension Hold-In/Hold-Out Ball Bearing Drawer Slides, Unhanded Side Mount Zinc - 8908B 32

Knape And Vogt 32 Inch Drawer Slides For Heavy Use

Knape and Vogt 32 inch drawer slides in the 8908 Series are full extension, side mount ball bearing drawer slides designed for demanding applications. The slide is designed to be used in vehicles, tool boxes and large pantry pull-outs, so it supports drawers that need to travel fully out under substantial load. The non-handed design means the same 8908B 32 member works on either side of the drawer, which simplifies layout and reduces part variation on the job. A 3/4 inch side clearance and 3 inch height give clear mounting parameters, helping installers size drawer boxes and casework accurately around this slide. Heavy-duty ball bearings carry the heaviest loads without sticking, which keeps movement smooth when a drawer is fully extended in service. The lock-out and lock-in mechanism extends through the door front to allow for safe operation under heavy load, holding the drawer securely in or out as the application requires.

Heavy Duty Slide Details That Support Daily Work

• The 32 inch length provides full extension travel, so drawers in vehicles, tool boxes or large pantry pull-outs can be accessed along their entire depth, improving reach to tools or stored items at the back.
• The 3/4 inch side clearance defines the gap between drawer and cabinet, guiding drawer box sizing so the slide runs freely without side binding when installed in casework or enclosures.
• The 3 inch height sets the vertical profile of the slide, which helps installers plan drawer side heights and mounting positions where vertical clearances or stacked drawers are a concern.
• The non-handed design allows use on either side, which simplifies inventory and installation because there is no left or right member to differentiate during layout or field work.
• Heavy-duty ball bearings carry the heaviest loads without sticking, helping drawers open and close smoothly even when heavily loaded in vehicle installations, tool storage or tall pantry pull-outs.
• The lock-out and lock-in mechanism that extends through the door front lets users positively secure the drawer in the open or closed position under heavy load, supporting safer operation on moving vehicles or with tall loads.

Side Mount Drawer Slide Mounting And Fastening

This Knape and Vogt 8908 Series side mount drawer slide uses a specific fastener pattern to support its heavy-duty role. Recommended fasteners are #10 (82 degree) flathead machine screws on the cabinet member and #10 panhead machine screws on the drawer channel, which aligns fastener geometry with the slide profiles for solid mounting. Using the 3/4 inch side clearance as a constant, installers can build drawer boxes to fit tightly to the slide specifications while leaving enough gap for full extension travel. The 3 inch slide height also helps define vertical positioning on both the cabinet member and the drawer channel, so holes can be laid out to tie into structural material. Because the slide is unhanded, the same mounting approach repeats on both sides, streamlining installation steps across multiple drawers in vehicles, tool storage banks or pantry runs.

Using The 8908B 32 Slide In Real Projects

Where This Full Extension Slide Performs Best

The Knape and Vogt 8908B 32 full extension hold-in/hold-out ball bearing drawer slide is designed to be used in vehicles, tool boxes and large pantry pull-outs, so it fits applications where drawers are frequently cycled under heavy load. In vehicle builds, the 32 inch length allows deep storage drawers to travel fully out of the enclosure, and the lock-out mechanism that extends through the door front helps keep the drawer stable while loaded gear is accessed. In tool box installations, heavy-duty ball bearings that carry the heaviest loads without sticking support smooth action when drawers hold dense tools or hardware. For large pantry pull-outs, the combination of full extension and a defined 3/4 inch side clearance makes it easier to plan tall, deep pull-outs that track straight while supporting stored goods along the full slide length.

Details That Support Smooth, Repeatable Installations

The unhanded design of this 8908 Series side mount drawer slide reduces orientation errors, because each 32 inch member can be used on either side of the drawer, keeping layout consistent across a bank of drawers. With a 3/4 inch side clearance and 3 inch height, installers can standardize cabinet and drawer dimensions, which supports repeatable production in vehicle upfits, shop-built tool banks or pantry units. Heavy-duty ball bearings that carry the heaviest loads without sticking help keep action predictable over the full extension stroke, which is important when drawers are routinely loaded near the slide capacity. The lock-in and lock-out mechanism extending through the door front gives a clear control point at the user face of the cabinet, supporting predictable engagement and release every time the drawer is operated. Combined with the specified #10 flathead machine screws on the cabinet member and #10 panhead machine screws on the drawer channel, these details help the slide perform consistently wherever it is deployed.

Common Questions About The 8908 Series Slide

Selecting This Slide For Heavy Duty Drawers

The Knape and Vogt 32 inch drawer slides 8908B 32 give installers a full extension, side mount solution tailored to vehicles, tool boxes and large pantry pull-outs. With defined 3/4 inch side clearance, 3 inch height and a non-handed layout, it fits well into repeatable cabinet and drawer designs. Heavy-duty ball bearings and a lock-in/lock-out mechanism that extends through the door front keep movement controlled under heavy load. For projects calling for a 32 inch full extension drawer slide with hold-in/hold-out function, this 8908 Series member offers a clear, specification-driven choice.