Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Candler pull 160mm describes a cabinet pull from Amerock Corporation designed around a 6-5/16 inch (160 mm) center-to-center hole spacing, which sets the handle up for straightforward mounting on doors or drawers drilled to that pattern. The pull uses a broad-faced design with traditional feet from the Candler collection, so it presents a wide gripping surface while tying into both traditional and transitional cabinet styles on the same job. The antique silver finish defines the visual tone, giving the zinc die-cast body a muted metal look that coordinates with antique silver decorative hardware on neighboring fronts. Overall length of 7-15/16 inches (202 mm) means the pull visually spans a wider section of the face, which helps when aligning multiple handles on banks of doors or large drawer fronts. A 1-5/16 inch (33 mm) projection sets the stand-off from the surface, affecting finger clearance during everyday use.
The 6-5/16 inch (160 mm) center-to-center dimension on this Amerock Candler pull directly controls where mounting holes land, so layouts for both new work and replacements can be built around that fixed spacing. A base length of 1-1/8 inch (29 mm) and base width of 15/16 inch (24 mm) describe the footprint at each end, which matters when covering existing marks or when locating the pull onto narrow framing or rail stock. The 7-15/16 inch (202 mm) overall length then determines the span between those bases, affecting how far the pull visually reaches across a drawer front. With a projection of 1-5/16 inch (33 mm) from the surface, the handle stands proud enough to define a consistent clearance zone behind the grip line on typical cabinet door thicknesses.
The Amerock Candler Series 6-5/16 inch (160 mm) center-to-center antique silver pull BP29364AS is part of the Candler collection, so it shares the same broad-faced profile and traditional feet as other pieces in that line, which helps when coordinating across an entire kitchen or built-in run. Its classification under decorative hardware handles and pulls places it in typical cabinet, furniture, or millwork applications where a surface-mounted pull is required. The antique silver finish gives the zinc die-cast construction a specific color tone that aligns with antique silver cabinet hardware selections on doors, drawers, and matching moldings. With an overall length of 7-15/16 inches (202 mm), the pull suits wider drawer fronts or taller doors where additional handle length supports proportion and repeat spacing along the installation.
The 6-5/16 inch (160 mm) center-to-center measurement on this Amerock Candler cabinet handle sets a precise drilling dimension that supports repeated alignment when laying out multiple fronts in a run. A projection of 1-5/16 inch (33 mm) combined with a 15/16 inch (24 mm) width defines how far the grip stands off and how broad the hand contact area feels, which is useful when planning around door thickness and nearby moldings. The 1-1/8 inch (29 mm) base length and 15/16 inch (24 mm) base width at each end outline the bearing surface against the cabinet, helping the pull sit with a defined footprint over finished surfaces. Zinc die-cast material under the antique silver finish provides a solid body for the handle geometry, which supports the broad face design of the Candler collection during regular opening and closing cycles. The manufacturer part number BP29364AS uniquely identifies this exact combination of size, finish, and collection for straightforward reordering or matching during later phases of a project.
The Amerock Candler pull has a 6-5/16 inch (160 mm) center-to-center dimension, which sets the exact mounting hole spacing used when drilling new fronts or matching existing layouts.
The BP29364AS pull measures 7-15/16 inches (202 mm) in overall length, so it visually spans a larger portion of doors or drawers when repeating the hardware across a run.
The Amerock Candler pull uses zinc die-cast construction, giving a solid metal body that supports the broad-faced design profile of the Candler collection under normal cabinet use.
This antique silver cabinet pull projects 1-5/16 inches (33 mm) from the mounting surface, defining the clearance space behind the handle for fingers on doors and drawers.
Each end of the pull has a base length of 1-1/8 inches (29 mm) and a base width of 15/16 inches (24 mm), which describes the footprint resting on the cabinet surface.
The BP29364AS Amerock Candler pull has an antique silver finish, allowing it to align with other antique silver decorative cabinet hardware in the same installation.
The Amerock Candler Series 6-5/16 inch (160 mm) center-to-center antique silver pull BP29364AS combines a defined drilling dimension with a broad-faced profile suited to both traditional and transitional cabinet work, giving one handle style flexibility across mixed fronts. Its zinc die-cast construction, 7-15/16 inch (202 mm) overall length, and 1-5/16 inch (33 mm) projection establish repeatable size and clearance characteristics that carry through door and drawer layouts. When a project calls for antique silver decorative hardware at a 160 mm center-to-center spacing, this Amerock Candler pull provides a clearly specified option that aligns finish, footprint, and mounting dimensions from the first installation to follow-up additions.
Sold In: 1 Each
