
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Candler appliance pull gives you an 8 inch (203 mm) center-to-center spread, which sets consistent drill points on wider cabinet or appliance fronts and helps align multiple pulls in straight, repeatable rows across a run of doors or panels. The satin nickel finish controls reflected light on the broad-faced design, which keeps the pull visually calm on larger surfaces while still defining the handle edge for quick hand location. Traditional feet at each end visually frame the pull, so the hardware reads as intentional trim on face frames or full-overlay fronts instead of disappearing into the door plane. Zinc die-cast construction creates a uniform shape across each BP29365G10 pull, supporting consistent sightlines when several are installed together in a kitchen, bath, or utility setting.
This Amerock Candler appliance pull uses an 8 inch (203 mm) center-to-center mounting pattern, so the two fastener points sit on a straight 203 mm line and match common appliance-pull spacing in cabinet layouts. The 1-5/16 inch (33 mm) projection sets the bar forward from the face, which helps fingers clear door edges when pulling while still keeping the handle close enough to read as integrated trim. A 1-1/8 inch (29 mm) width across the pull body defines a clear visual center for marking, so installers can quickly reference the edges when aligning to panel reveals or stile edges. The 10-1/4 inch (260 mm) overall length spans a noticeable portion of wider fronts, which aids in centering the pull visually on tall doors or appliance-style faces.
The Amerock Candler appliance pull with 8 inch (203 mm) center-to-center spacing aligns well with applications where a larger bar visually suits the scale, such as tall cabinet doors, pantry fronts, or appliance-style panels that benefit from a longer grip. The satin nickel finish coordinates with satin nickel-focused hardware schemes, so it integrates with other satin nickel handles or hinges in the same room for a unified look. Its 10-1/4 inch (260 mm) overall length visually balances on broad drawer fronts, helping the pull read as a design element instead of a small point on a large panel. The traditional feet at each end of the pull visually terminate on rails or stiles, which supports clean transitions between the hardware and the cabinet framing members.
The 8 inch (203 mm) center-to-center measurement on this BP29365G10 pull ties directly into drilling patterns, so installers can use a single template setting for every identical door or drawer that uses this appliance pull. The 1-5/16 inch (33 mm) projection keeps the grip depth consistent from opening to opening, helping the hand feel remain the same across a full bank of doors fitted with the Candler series satin nickel pull. A 1-1/8 inch (29 mm) width on the broad-faced design offers a dependable reference edge when checking alignment by eye along a row of cabinets. The 1-5/16 inch (33 mm) by 1-1/8 inch (29 mm) base dimensions at each end give a predictable footprint, which can help visually bridge small layout variations between doors and drawers. Zinc die-cast construction supports consistent shape and dimensions from pull to pull, so gaps, reveals, and alignments planned around one unit translate cleanly when multiplied across the project.
The Amerock Candler appliance pull has an 8 inch (203 mm) center-to-center dimension, which sets the exact spacing between mounting points for drilling and layout on doors or panels.
The BP29365G10 pull measures 10-1/4 inches (260 mm) overall, so it spans a noticeable portion of wider cabinet or appliance fronts for both grip and visual balance.
The Candler satin nickel pull is zinc die-cast, providing a uniform molded form that supports consistent dimensions and matching appearance across multiple installed pulls.
This Amerock Candler appliance pull has a 1-5/16 inch (33 mm) projection, creating regular finger clearance behind the bar while keeping it close to the cabinet face.
The Candler series satin nickel pull has a 1-1/8 inch (29 mm) width, giving a broad face that is easy to grip and straightforward to align visually on cabinet fronts.
The BP29365G10 appliance pull is part of the Candler collection, so its broad-faced design and traditional feet visually coordinate with other Candler hardware pieces.
The Amerock Candler appliance pull in satin nickel combines an 8 inch (203 mm) center-to-center layout with a 10-1/4 inch (260 mm) overall length, which suits wider cabinet and appliance-style fronts where a longer bar feels proportional. Its zinc die-cast construction, 1-5/16 inch (33 mm) projection, and 1-1/8 inch (29 mm) width create uniform, repeatable geometry, helping projects maintain consistent hand feel and alignment from one opening to the next. When a Candler collection look and satin nickel finish are already part of the design, this BP29365G10 size gives you a matching option for larger doors or panels. Use these dimensions and collection details to decide where this pull fits into your next cabinet or appliance-front layout.
Sold In: 1 Each