
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Extensity appliance pull gives an 18 inch center to center grip that spans wide appliance or cabinet fronts, so you can line up large doors or panels with a single, continuous handle. The zinc die-cast construction creates a solid pull body, which supports a firm handhold when operating heavier doors in busy kitchens or workspaces. A satin nickel finish provides a neutral metallic look, helping this pull coordinate with other satin nickel decorative hardware in the same room. The pull length of 19-3/16 inches leaves visual overhang past the 18 inch center to center mounting points, which frames the door face and creates a defined handle area. A projection of 1-3/4 inches sets the grip off the surface, giving fingers space behind the bar while opening and closing doors. The 7/8 inch width creates a slim front profile, which keeps the pull from feeling bulky across a tall appliance or cabinet face.
The 18 inch (457 mm) center to center measurement defines the drilling pattern, so hole locations can be laid out to match this spread on appliance panels or tall cabinet doors. Using the 19-3/16 inch overall length as a reference helps position the pull so its ends sit evenly on the surface, which is useful when aligning with adjacent hardware. The 1-3/4 inch projection determines how far the pull extends into the room, guiding placement on doors that open near walls or adjacent cabinets. The 7/8 inch width keeps the handle footprint compact, which matters when fitting it on narrow stile areas of custom fronts. The satin nickel finish and Amerock Extensity styling tie the pull into other Extensity series pieces, which supports consistent hole spacing and visual alignment across a full installation.
The Amerock Extensity Series satin nickel 18 inch center to center appliance pull works well on wide fronts where a long handle improves leverage. The 18 inch (457 mm) center to center layout suits tall cabinet doors or appliance panels designed for extended pulls, so the handle spans a large portion of the surface. With an overall length of 19-3/16 inches, the pull visually anchors doors on refrigerators, tall pantry units, or other oversized fronts that benefit from a continuous grip. The 1-3/4 inch projection and 7/8 inch width create a profile that projects enough for comfortable grasping while staying trim, which fits fronts where a clean, linear look is important. Zinc die-cast construction and satin nickel finish align with other decorative hardware in the same material family, which helps designers and installers maintain a coordinated appearance across banks of cabinets and appliances.
The defined 18 inch center to center dimension on the BP29397G10 appliance pull allows repeatable drilling across multiple doors, which keeps handle placement consistent along a cabinet run. Knowing the 19-3/16 inch overall length helps installers center the pull on door panels so the ends land symmetrically, which reduces layout time when matching pairs of doors. The 1-3/4 inch projection provides predictable stand-off from the surface, which is useful when spacing doors near adjacent walls, panels, or other hardware. A 7/8 inch width keeps the handle visually balanced on narrow and wide stiles, which supports using the same model in different door sizes without changing proportions. The satin nickel finish and Extensity collection styling let designers repeat this pull on companion fronts, which simplifies hardware selection when standardizing one look across multiple projects.
The Amerock Extensity appliance pull uses an 18 inch (457 mm) center to center dimension, which sets the hole spacing for mounting on doors or panels.
The Amerock BP29397G10 pull has a 19-3/16 inch overall length, which extends slightly beyond the mounting holes to frame the grip area on the front.
The Extensity Series satin nickel 18 inch center to center appliance pull is zinc die-cast, which creates a solid, uniform handle body.
The Amerock Extensity appliance pull projects 1-3/4 inches from the door surface, which provides finger clearance behind the handle when opening.
The BP29397G10 Extensity pull has a 7/8 inch width, which keeps the front profile slim while still defining a clear grasp point.
This Amerock Extensity appliance pull uses a satin nickel finish, which coordinates with other satin nickel decorative hardware in the same space.
The Amerock Extensity Series satin nickel 18 inch center to center appliance pull BP29397G10 offers defined dimensions that support layout work on wide doors and panels. With a 19-3/16 inch overall length, 1-3/4 inch projection, and 7/8 inch width, the pull provides predictable proportions when repeating hardware across tall units. The zinc die-cast construction and satin nickel finish align with the Extensity collection, supporting coordinated decorative hardware selections. Use the 18 inch (457 mm) center to center drilling as the basis for hardware placement when planning an installation that relies on long, linear pulls.
Sold In: 1 Each