Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Grass Tiomos concealed hinge is built for cabinet faces set at a 45-degree outward angle, bringing soft-close performance and full overlay geometry to bay cabinets, diagonal corner units, and angled casework on both frameless and face-frame construction.
Diagonal corner and bay-style cabinets present a geometry problem that a standard hinge cannot solve: the cabinet face sits at an angle, so the door needs a hinge arm engineered to match that offset. This hinge handles the +45 degree outward cabinet angle directly, so the door hangs at the right plane without shimming or improvising. It works on both frameless and face-frame cabinet boxes, making it a practical choice across the range of diagonal corner units found in modern and traditional kitchen layouts alike.
The 35mm cup bores into the back of the door at a standard 12.6mm cup depth. The dowel mount attaches the cup to the door through pre-bored dowel holes rather than cup screws, which suits CNC-processed doors and production shops that bore doors before hinge assignment. The hinge arm then connects to a Grass base plate mounted to the cabinet, ordered separately and matched to the Tiomos series.
The hinge is plated steel in a nickel finish. Tiomos soft-close is integrated into the hinge body, so no separate damper or add-on is needed. On an angled door, that matters practically: a diagonal cabinet in a corner sees a lot of daily use, and the damped close protects the door edge and the adjacent surface from the impact of an undampened spring close. The 45mm boring pattern is the Tiomos standard for this series. Maximum door thickness is 24mm, which accommodates standard doors and slightly thicker overlay fronts in this application.
Three-way adjustment covers 3mm in each direction for height, side, and depth, giving enough range to bring a diagonal door to an even, consistent reveal after the cabinet is set and leveled.
Cabinet shops running angled corner units in production benefit most from the dowel-mount design, since doors can be bored at the CNC station and hinges pressed in without cup screws. Custom builders and installers specifying diagonal kitchens will find the +45 degree arm geometry eliminates the guesswork of adapting a standard hinge to an angled opening. For designers laying out a kitchen with a chamfered or diagonal corner cabinet, this is the hinge that closes the spec cleanly. Because this hinge is for outward-angled cabinets, it is not the right pick for blind-corner or inward-angled configurations; those applications use a negative-angle hinge instead.
Yes. The hinge arm connects to a Grass Tiomos base plate that mounts to the cabinet side or face-frame stile, and that plate is sold separately. Use a plate from the Tiomos series; plates are specific to the Grass system and are not interchangeable with other brands.
It means the cabinet face is angled 45 degrees outward from a standard 90-degree box, the geometry found on bay-style and diagonal corner units. The hinge arm is engineered for that offset. A standard hinge arm is built for a square cabinet face and will not produce the correct door position on a 45-degree cabinet.
Instead of using screws to secure the cup in the door bore, the dowel-mount cup carries pre-attached dowels that press into bored dowel holes alongside the cup. No screws are needed on the door side. This is the standard setup in CNC-bored production environments.
This is a Tiomos-series hinge and should be paired with Tiomos plates. Tiomos and Nexis use different plate families, so use the plate series that matches the hinge series to ensure the arm connects correctly.
Diagonal cabinet openings deserve a hinge built for them, and this Tiomos angled hinge delivers the correct geometry, integrated soft-close, and dowel-mount convenience that makes the corner door as reliable as every other door on the job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF017139424223 Mfr# F017139424213 | Grass Tiomos 110° Overlay Angled Corner Hinge +45 ° Soft-Closing Impresso F017139424223 | ||||
Sold in: 1 Each |  GFF028138533223 Mfr# F028138533223 | Grass Tiomos 11° Overlay Angled Corner Hinge +45 Degree Soft-Closing Screw-On F028138533223 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF072135500247 Mfr# F072135500247 | Tiomos Hinge Arm Cover Cap All Crankings, Nickel-Plated | ||||
Sold in: 1 Each |  GFF072135503228 Mfr# F072135503228 | Tiomos Hinge Cup Cover Cap, Nickel-Plated | ||||
Sold in: 500 Each |  GF81001 Mfr# 81001-43 | Wood Screws FHP, Nickel-Plated #6 Gauge 5/8" Length, Nickel-Plated - 500 Box Qty |
