Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Grass Tiomos Impresso hinge is built for cabinet doors on a positive 45 degree angled case, covering face-frame and frameless construction, with integrated soft-close and toolless snap-on mounting.
Bay cabinets and angled cabinet runs present a challenge that a standard straight-case hinge cannot solve: the door, the frame, and the hinge cup all sit at a compound angle to each other. This hinge is designed specifically for the positive 45 degree case, where the cabinet face opens outward at a diagonal. The 35mm cup bores into the door face at the correct angle, and the straight overlay arm carries the door to a consistent position relative to the angled frame. It works on both frameless panel construction and face-frame boxes, so the same hinge covers the two cabinet types most builders encounter on an angled run. A compatible Grass Tiomos base plate, sold separately, mounts to the cabinet and the arm snaps onto it.
The hinge is steel in a nickel finish. On angled doors, a damped close matters more than it might seem: the door swings through a wider arc relative to the opening than a standard door does, so the impact of an undamped close is amplified. The integrated soft-close handles that by slowing the door through the last few degrees before contact. Maximum door thickness is 24mm, which covers standard doors and slightly thicker slab fronts common in contemporary cabinetry.
Cabinet shops designing angled or bay kitchen runs, custom woodworkers building furniture with diagonal doors, and contractors finishing kitchen islands with angled end cabinets all need a hinge that is purpose-built for the geometry rather than forced into it. This hinge suits those jobs on either frameless or face-frame cases. Because the boring pattern accepts both 42mm and 45mm spacing, it fits into a Tiomos installation without requiring a dedicated boring setup just for the angled doors in the run. Pair it with the matching Grass Tiomos base plate for your cabinet construction type.
No. This hinge is engineered for a +45 degree angled cabinet face. Using it on a straight cabinet will not produce the correct door position. For standard cases, choose a straight-geometry Tiomos hinge.
No. A Grass Tiomos base plate is required and sold separately. Match the plate to your cabinet construction, frameless or face-frame, and to the door position you need. Grass plates are not interchangeable with plates from other brands.
The hinge arm snaps onto the mounted base plate with an audible click and no screwdriver needed. To remove a door, a release tab lifts the arm off the plate. The plate itself screws to the cabinet as a separate step.
Yes. The dual 42/45mm boring pattern means this hinge accepts either spacing, so a shop already set up for 45mm boring does not need a separate setup for these angled doors.
Specify this hinge when the cabinet angle is part of the design, not a compromise, and the doors need to match the quiet, damped close of every other cabinet on the job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF072135500247 Mfr# F072135500247 | Tiomos Hinge Arm Cover Cap All Crankings, Nickel-Plated | ||||
Sold in: 1 Each |  GFF072135503228 Mfr# F072135503228 | Tiomos Hinge Cup Cover Cap, Nickel-Plated | ||||
Sold in: 500 Each |  GF81001 Mfr# 81001-43 | Wood Screws FHP, Nickel-Plated #6 Gauge 5/8" Length, Nickel-Plated - 500 Box Qty |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GFF028138533223 Mfr# F028138533223 | Grass Tiomos 11° Overlay Angled Corner Hinge +45 Degree Soft-Closing Screw-On F028138533223 | ||||
Sold in: 1 Each |  GFF028138543223 Mfr# F028138543223 | Grass Tiomos 110° Overlay Angled Corner Hinge +45° Soft-Closing Dowel Mount F028138543223 |
