Tiomos Adjustment Wing Mounting Plate with Pre-Mounted Euro Screws, 4-Point Fixing, Nickel-Plated, Screw-On, 3.5mm

Tiomos Adjustment Wing Mounting Plate For Precise Hinges

Tiomos adjustment wing mounting plate with pre-mounted Euro screws is a Grass America hinge mounting plate that connects Tiomos hinges to the cabinet, so the hinge position is fixed solidly to the case during installation and adjustment. The 3.5mm mounting plate height establishes the starting overlay and reveal, giving a predictable reference line when laying out multiple doors on a run of cabinets. The 4-point fixing design uses four connection points to the cabinet, spreading the load across the mounting area so the hinge plate stays stable under door use. Steel construction provides a rigid base for the hinge arm, so alignment is maintained when doors are opened and closed repeatedly. The nickel-plated finish on the steel surface resists wear during adjustments, so the plate continues to move smoothly against the hinge components. Screw-on installation uses pre-mounted Euro screws, so the plate fastens directly at the drilling pattern prepared for Euro-style cabinet construction.

Key Mounting Plate Details For Cabinet Work

• The 3.5mm plate height sets a consistent hinge mounting level, so door reveals and overlays can be repeated cabinet to cabinet with the same drilling pattern and layout.
• Steel, nickel-plated construction forms a strong interface between cabinet and Tiomos hinge arm, so repeated door cycles do not easily disturb alignment.
• 4-point fixing secures the plate at four locations on the cabinet, so the load from the door and hinge is shared and the plate seats firmly against the case side.
• Pre-mounted Euro screws are fixed to the plate from the factory, so the plate threads into standard Euro screw holes without separate screw handling during assembly.
• Height adjustment via worm gear is built into the plate, so vertical alignment of the door can be tuned directly at the mounting plate after the hinge is assembled.

Mounting And Adjustment Details For Installation

The screw-on design of this hinge mounting plate uses Euro screws that are already positioned in the plate, so the installer drives the plate into prepared Euro-style cabinet holes in one step. The 4-point fixing layout gives four screw positions on the cabinet, so the plate seats flat and resists twisting when the door weight is applied through the Tiomos hinge arm. The 3.5mm height dimension defines how far the hinge arm stands off the cabinet surface, so the vertical relationship between door and cabinet front stays consistent when repeating the same plate on multiple openings. Height adjustment via worm gear is built into the plate body, so fine vertical moves are made by turning the adjustment gear instead of relocating the plate, which keeps the original drilling layout intact.

Using This Tiomos Hinge Mounting Plate In Projects

Where This Hinge Mounting Plate Fits Best

This hinge mounting plate is part of the Tiomos hinge system from Grass America, so it serves as the fixed cabinet-side component that the Tiomos hinge arm clips or screws onto during assembly. The 3.5mm wing mounting plate height works wherever this plate thickness is specified in the hinge plan, so the door overlay and gap are based on the known plate dimension across all cabinet openings. The 4-point fixing pattern suits Euro screw layouts that support four fasteners around the hinge position, so larger or heavier doors can transfer load into the cabinet side over a wider area. Steel construction responds well to repeated opening and closing of doors, so the cabinet-side mounting point for the hinge remains solid during normal shop and field use. Nickel-plated steel also presents a smooth surface under the hinge arm, so adjustment movements at the joint remain predictable over time.

Why These Mounting Features Support Accurate Results

The height adjustment via worm gear is integrated directly into the mounting plate, so installers dial in vertical positioning of the door without loosening the main mounting points, which supports repeatable alignment during final fitting. Because the worm gear controls height at the plate, small changes in door position can be made after the door is hung, so fine tuning is handled on the installed assembly. The 4-point fixing layout stabilizes the plate while adjustments are made, so movement from the worm gear is translated into controlled door travel instead of plate shifting. Pre-mounted Euro screws simplify the sequence of tasks at the bench or on site, so the installer works with a single piece when driving the plate into Euro-drilled holes. The combination of steel, nickel-plated material with 3.5mm height and worm gear adjustment gives a defined mounting geometry, so repeated cabinets can share the same hinge setup for consistent door alignment.

Common Questions About This Tiomos Mounting Plate

Choose This Plate For Tiomos Hinge Layouts

The Tiomos adjustment wing mounting plate with pre-mounted Euro screws, 3.5mm height, and 4-point fixing from Grass America provides a defined base for Tiomos hinges, so cabinet door alignment can be set and fine-tuned directly at the plate. Steel, nickel-plated construction with worm gear height adjustment gives a controlled mounting point, so repeated doors on a project share the same hinge geometry. For Tiomos hinge runs laid out around a 3.5mm plate, this hinge mounting plate supports consistent installation on cabinets supplied by Wurth Baer Supply.