Tiomos Cam Adjustable Frameless Wing Base Plate with Pre-Mounted Euro Screws, Nickel-Plated, 0mm

Tiomos Wing Base Plate For Frameless Hinges

Tiomos cam adjustable frameless wing base plate provides the mounting interface for Tiomos-style hinges on frameless cabinets, so the hinge body locks onto a stable plate and doors operate on a consistent reference surface during everyday use.

This Grass America hinge mounting plate has a 0mm height, which sets the hinge directly at panel level, helping cabinetmakers build flush overlay relationships where the door position is controlled by hinge and plate geometry rather than extra shims.

The plate is manufactured from steel, giving the hinge base a rigid foundation that resists flex during door movement, which supports long-term alignment when doors are opened and closed repeatedly in normal cabinet service.

A nickel-plated finish covers the steel, so the base plate presents a clean metallic surface that integrates visually with typical cabinet hardware, which matters in exposed interiors where customers can see hinge components.

This wing-style plate is designed for frameless construction, so installers can plan hinge layouts around flat cabinet sides and consistent drilling patterns in shop or onsite workflows.

Key Tiomos Base Plate Details For Installers

• This hinge mounting plate uses 4 point fixing, so the plate fastens to the cabinet at four locations, spreading load over a wider area and helping maintain stable door alignment under repeated use.
• Height adjustment is via worm gear, meaning the plate allows controlled vertical movement when the gear is turned, so installers can fine-tune door reveal without loosening and retightening primary fixing points.
• The plate is specified for twin application, so two hinge positions can be supported in the same cabinet program, which is useful when doors share consistent drilling data across multiple openings.
• Steel, nickel-plated construction provides a hard metal base with a protected surface, supporting both mechanical strength for hinge engagement and a finished look inside cabinets or casework.
• This Grass America Tiomos base plate is categorized under hinge mounting plates, helping shops match it with compatible Tiomos hinge arms in a standard cabinet hardware system.

Mounting And Adjustment Details For Tiomos Plate

This 0mm frameless wing base plate positions the hinge arm at panel level, so the door overlay and gap pattern are governed by hinge design rather than additional spacers, which simplifies layout when repeating the same construction across a run of cabinets.

The 4 point fixing layout secures the plate firmly to the cabinet, so the hinge connection resists shifting under door weight, which helps maintain consistent reveals after installation and during routine opening and closing.

Height adjustment via worm gear gives installers a controlled way to move the door vertically by turning the adjustment gear, so doors can be aligned with neighboring fronts while the plate remains fixed to the cabinet side.

This frameless wing configuration integrates into cabinet projects using Tiomos hinge technology, allowing the base plate to serve as the structural link between cabinet side and hinge arm in European-style constructions.

Using This Grass America Tiomos Mounting Plate

Where This Wing Base Plate Fits Best

This Tiomos cam adjustable frameless wing base plate is intended for frameless cabinet work where Tiomos hinge systems are used, so it serves as the hinge connection point on side panels in kitchens, baths, or casework built with flat cabinet sides.

The 0mm plate height is suited to layouts where the cabinet side itself defines the hinge reference plane, which supports overlay or inset relationships determined by the hinge arm geometry and drilling pattern rather than offset base hardware.

Because the plate is designed as a wing style component, it spreads bearing area across the cabinet surface, which is useful when doors are cycled repeatedly and installers want the hinge load shared over a broader section of the panel.

The twin application designation supports projects where pairs of hinges follow the same mounting concept across multiple cabinets, so production shops can standardize boring patterns around this plate and streamline casework runs.

Within Grass America hinge programs, this plate functions as part of an integrated hinge mounting strategy, so it can be specified wherever Tiomos hinge arms require a frameless wing plate foundation.

Why Its Adjustment And Fixing Improve Results

The worm gear height adjustment enables precise vertical tuning at the plate, so installers can correct minor drilling tolerances or cabinet racking by dialing the door up or down, which reduces rework on door edges or cabinet fronts.

Because the height moves via a geared mechanism, adjustments are incremental and repeatable, so multiple doors can be set to matching reveals by applying similar gear movements, helping achieve uniform sight lines across a bank of fronts.

The 4 point fixing layout stabilizes the plate under hinge load, so the connection does not depend on a single fastener pair, which helps maintain hinge geometry when heavier or taller doors operate on the cabinet.

Steel, nickel-plated construction keeps the plate dimensionally stable under normal cabinet loads, so cam and gear interfaces continue to function smoothly, supporting consistent adjustment behavior over the service life of the installation.

The mounting plate format aligns with hinge base plate standards in the Grass America Tiomos family, so hardware planners can coordinate this component with corresponding hinges in their cabinet design and manufacturing processes.

Common Tiomos Frameless Base Plate Questions

Selecting This Tiomos Plate For Your Project

This Tiomos wing base plate with 0mm height, worm gear height adjustment, 4 point fixing, and steel nickel-plated construction delivers a frameless mounting solution that supports precise door alignment on Tiomos-style hinge installations.

When cabinet projects call for a Grass America hinge mounting plate matching these characteristics, this Tiomos cam adjustable frameless wing base plate can be specified as part of the hinge hardware set.