Tiomos Wing Base Plate For Frameless Cabinets

Tiomos cam adjustable frameless wing base plate defines the mounting point for Tiomos hinges on frameless cabinet jobs. This hinge mounting plate from Grass America provides the fixed reference between the cabinet side and the hinge arm, so door position stays consistent across a run.

The plate has a 2mm height, so it sets the hinge interface at a known level relative to the cabinet side. That fixed dimension supports repeatable layouts when matching multiple doors on the same elevation.

The plate is made from steel and nickel-plated, so the base structure stays rigid while the plated surface resists typical shop and cabinet-interior environments. This combination supports long-term alignment where hinge loads are carried through the plate.

Four point fixing on the plate spreads the mounting load. This layout helps keep the plate stable against the cabinet side, which supports accurate hinge function during daily use and adjustments.

Key Mounting Details That Support Hinge Setup

• The 4 point fixing pattern ties the plate to the cabinet side at four locations, which helps resist twisting or creep when doors are cycled, supporting consistent reveal lines over time.
• Height adjustment via worm gear gives controlled vertical movement at the plate interface, so fine tuning door position happens through the plate rather than shifting the entire cabinet layout.
• The 2mm wing plate dimension defines a known mounting offset, allowing installers to plan drilling and boring patterns that match Tiomos hinge geometry across multiple cabinets.
• Pre-mounted Euro screws connect the plate using the Euro system, which aligns with standard system holes on frameless cabinets and speeds attachment where that pattern is present.
• The steel, nickel-plated construction provides a solid bearing surface for the hinge arm connection, so compressive loads from door weight transfer cleanly into the cabinet side.

Frameless Plate Mounting And Height Adjustment

This Grass America hinge mounting plate is designed for frameless applications, so it works with Euro-style system holes in the cabinet side. The 4 point fixing uses pre-mounted Euro screws, which tie directly into those system holes for stable attachment.

Height adjustment via worm gear is built into the plate, allowing vertical changes without disturbing the cabinet body. By rotating the worm gear, the hinge connection point shifts in a controlled way, supporting precise door alignment along the cabinet run.

The 2mm plate height becomes part of the overall hinge stack-up, so knowing that value simplifies layout calculations when aligning with Tiomos hinge arms.

Using This Tiomos Plate In Real Projects

Where This Tiomos Hinge Plate Fits Best

This Tiomos cam adjustable frameless wing base plate is intended for hinge mounting on frameless cabinets that use Euro-style construction. The wing design and 4 point fixing let the plate sit on the cabinet side where the hinge arm must attach.

Because the plate uses pre-mounted Euro screws, it interfaces with system holes that are standard in frameless manufacturing. This direct connection supports production work and field adjustments on cabinets built around the Euro hole pattern.

The 2mm wing plate height sets the hinge arm at a predictable distance from the cabinet side, which is important when matching door reveals across banks of cabinets. That fixed dimension lets drawings, boring patterns, and on-site fitting all reference the same offset.

Steel construction means the plate carries the hinge loads from the door back into the cabinet side. The nickel-plated finish gives the plate a treated surface suitable for typical cabinet interiors, supporting use in residential or commercial casework built around Tiomos hinges.

Adjustment And Twin Application For Consistent Results

The integrated height adjustment via worm gear lets installers move the hinge interface up or down in small increments. That controlled motion reduces the need to re-drill positions when aligning door tops and bottoms, especially on multi-door runs.

Four point fixing stabilizes the plate, so the worm gear adjustment acts on a solid base. When the plate stays firmly seated against the cabinet side, height changes translate directly to hinge movement, which keeps adjustments predictable.

The plate is designed for twin application, meaning it can be used where paired hinge positions must behave identically on a cabinet. In these situations, the common 2mm height and worm gear adjustment help both hinges share the same reference plane.

As a Grass America hinge mounting plate with a specific manufacturer part number F058139864228, this part ties into the Tiomos system as a defined component. That clear identification supports repeat orders and consistent hardware selection across projects that standardize on Tiomos hinges.

Common Questions About This Tiomos Wing Plate

Selecting This Plate For Frameless Hinge Work

This Tiomos cam adjustable frameless wing base plate from Grass America offers a 2mm steel, nickel-plated mounting surface with 4 point fixing and worm gear height adjustment. When frameless projects rely on Euro-style system holes and Tiomos hinges, this plate provides a defined reference point for consistent mounting and repeatable door alignment.