Tiomos Wing Mounting Plate For Precise Hinge Setup

Tiomos adjustment wing mounting plate gives a dedicated base for Tiomos hinges, so the hinge seats consistently and supports accurate door alignment on cabinet runs. The 6mm mounting plate height establishes a fixed reference plane between cabinet side and hinge arm, which keeps reveal planning predictable from cabinet to cabinet. Grass America design ties this plate into the Tiomos hinge system, which helps maintain reliable geometry between plate, hinge arm, and door. Nickel-plated zinc die-cast and steel construction provides a hard, smooth surface at the hinge interface, which supports repeatable movement over time. The wing mounting style spreads the load over a wider footprint on the cabinet, which supports firm seating when the plate is screw-fastened to the case side. This hardware works within the Tiomos platform as the cabinet-side component that connects the hinge to the case.

Key Tiomos Mounting Details That Support Workflow

• The 6mm wing mounting plate depth sets a consistent setback between cabinet side and hinge arm, which simplifies layout when repeating the same overlay and gap across multiple doors in a project.
• 2-point fixing anchors the plate with two screw locations, which gives a defined pivot axis for the Tiomos hinge arm and supports stable holding strength during door movement.
• Height adjustment via worm gear lets the installer move the hinge position vertically on the plate, which allows fine-tuning of door reveal alignment after the plate is secured to the cabinet.
• Zinc die-cast and steel construction, finished in nickel plating, creates a rigid mounting base with a corrosion-resistant surface, which helps maintain clean motion at the hinge interface in typical shop and cabinet environments.
• Pre-mounted Euro screws provide the threaded connection at the hinge interface, which speeds hinge attachment and removal on the mounting plate during fitting or replacement work.

Mounting Plate Fixing And Height Adjustment Use

This screw-on Tiomos wing mounting plate installs to the cabinet with a 2-point fixing pattern, so the plate is drawn tight to the case side at two defined points instead of a broader array of fasteners. The 6mm plate height forms a fixed build-up between cabinet and hinge arm, which stabilizes the door overlay calculation for that installation. Height adjustment via worm gear allows vertical movement of the hinge on the plate after the plate is secured, so the installer can trim door gaps without shifting the plate. Pre-mounted Euro screws serve as the hinge connection, which lets the hinge arm clamp quickly to the plate during installation or service. Nickel-plated zinc die-cast and steel materials provide a durable seating surface for this repeated tightening and loosening.

Using This Grass Hinge Mounting Plate In Practice

Where This 6mm Wing Mounting Plate Fits In

This Grass America Tiomos adjustment wing mounting plate functions as the cabinet-side element of a Tiomos hinge setup, so it occupies the mounting position on the cabinet case where the hinge arm attaches. The 6mm plate height defines how far the hinge arm stands off the case, which influences door overlay and the clearance needed for adjacent fronts. The wing form spreads this height over a broader bearing area, so the plate can support hinge and door loads across its extended footprint on frameless cabinet sides. Pre-mounted Euro screws thread into the hinge arm connection points, which ties the hinge securely to the plate as part of the hinge system. Nickel-plated zinc die-cast and steel components supply a solid structural link between cabinet substrate and moving hinge arm during daily operation.

How Worm Gear And 2-Point Fixing Help Alignment

The 2-point fixing design of this Tiomos mounting plate sets a clear line between the two screw positions, which defines a stable axis for the hinge to operate around during opening and closing. Once the plate is screw-fastened to the cabinet, the worm gear height adjustment allows vertical movement of the hinge relative to the plate, so door reveals can be dialed in without disturbing the screw-on mounting points. This adjustment approach reduces the need to reposition the plate itself when trimming alignment, which helps retain the original drilling pattern in production work. The 6mm plate height works with the worm gear system to keep changes limited to the hinge side of the joint, so repeated tweaks do not alter the base reference on the cabinet. Nickel plating over zinc die-cast and steel keeps the worm gear contact surfaces smooth, which supports controlled adjustment travel under tool-driven movement.

Common Questions About This Tiomos Mounting Plate

Selecting This Tiomos Plate For Your Hinge Runs

This Tiomos adjustment wing mounting plate from Grass America provides a 6mm screw-on base with worm gear height adjustment, so hinge alignment work centers on one consistent reference. For cabinet runs built around the Tiomos system, this plate keeps the geometry between hinge arm and cabinet predictable across each opening. When projects call for a nickel-plated zinc die-cast and steel mounting plate with 2-point fixing and pre-mounted Euro screws, this model aligns with that specification. Use it wherever a Tiomos hinge layout benefits from a 6mm wing plate that supports accurate door reveals and practical on-site adjustment across multiple cabinets.