Tiomos Adjustment Wing Mounting Plate For Precise Hinges

Tiomos adjustment wing mounting plate with pre-mounted euro screws is a Grass America hinge mounting plate designed for controlled alignment of Tiomos hinges on cabinet work. The 9.5mm mounting plate height establishes a defined door height reference, which helps keep reveals consistent across multiple doors. The screw-on design uses euro screws, so the plate fastens directly into system-based euro drilling patterns often used in cabinet construction, supporting repeatable layouts. The plate is classified as a hinge mounting plate, meaning it forms the interface between the Tiomos hinge arm and the cabinet, and it carries the load path from door to case. The wing mounting plate style provides lateral bearing surface on the cabinet, which supports stable positioning during installation and later adjustment. Nickel-plated surfaces on the zinc die-cast and steel components provide a clean metal finish that resists handling wear in typical shop and jobsite conditions.

Key Mounting Plate Details That Support Workflow

• The 2-point fixing design secures the Tiomos adjustment wing mounting plate with two fasteners, which stabilizes the plate on the cabinet side and helps the hinge arm stay aligned under everyday door use.
• Height adjustment via worm gear builds a fine mechanical adjustment into the plate, so small door height corrections can be made at the plate rather than moving the cabinet or re-drilling hinge positions.
• The screw-on mounting style with euro screws connects directly to pre-drilled euro system holes, which speeds installation on line-bored cabinet panels and supports consistent hinge setbacks from edge references.
• The 9.5mm wing mounting plate height sets a known offset between cabinet and hinge arm, which supports predictable overlay or inset geometry when used with properly matched Tiomos hinges.
• Zinc die-cast and steel construction with a nickel-plated finish provides a rigid mounting interface, which helps the hinge system maintain alignment when doors are cycled repeatedly in normal cabinet applications.

Screw-On Tiomos Plate Installation And Adjustment

This Tiomos adjustment wing mounting plate uses screw-on installation with euro screws, so it engages directly into euro-style cabinet drilling patterns common in system furniture construction. The 2-point fixing pattern sets the plate with two euro screws, which creates a stable base before the hinge arm is attached. Once the plate is secured, height adjustment via the built-in worm gear allows vertical movement of the mounted hinge relative to the cabinet. That adjustment capability lets installers correct small door height variations after doors are hung, instead of altering casework. The 9.5mm plate height works together with Tiomos hinge geometry, so when plates are set at each hinge position, door alignment can be tuned consistently using the worm gear function along the run of cabinets.

Using This Grass America Plate In Cabinet Runs

Where This 9.5mm Wing Plate Fits Best

The Grass America Tiomos adjustment wing mounting plate with pre-mounted euro screws serves as a hinge mounting plate for Tiomos hinge systems on cabinet cases. Its 9.5mm height defines the separation between the cabinet wall and the hinge arm pivot location, which is critical in cabinet runs where door gaps must repeat from opening to opening. The wing design spreads contact along the cabinet surface, giving a solid base for the hinge arm connection. In cabinet lines built around euro system drilling, the screw-on euro screw fastening lets the plate register into the bore pattern, so holes serve as the layout reference instead of layout marks. That approach supports efficient production of multiple cabinets that must share common hinge locations and door reveals.

The plate is constructed from zinc die-cast and steel components with a nickel-plated finish, which creates a stable metal interface between the case and the Tiomos hinge. In service, this rigid interface helps the hinge maintain its set position when doors are opened and closed. The plate functions as part of the hinge stack, so accurate plate placement directly influences how smoothly doors line up along a bank of cabinets. With a defined 9.5mm height and consistent euro screw positioning, installers can repeat the same setup from cabinet to cabinet, then rely on the hinge and worm gear height adjustment at each plate to fine-tune door positions without altering the basic case construction.

How Worm Gear Height Adjustment Helps Alignment

This Tiomos adjustment wing mounting plate uses height adjustment via worm gear, which introduces a controlled vertical adjustment into the mounting interface. The worm gear mechanism translates small turns of the adjustment drive into precise up-or-down movement of the hinge mounting level relative to the 9.5mm base height. In cabinet work, that mechanical advantage matters when aligning doors that share a common top line or bottom line, because installers can shift door height in small increments directly at each plate. The 2-point fixing pattern holds the plate firmly while the worm gear operates, so the adjustment changes height without disturbing the basic plate position on the cabinet.

When multiple plates are installed on a tall door, the worm gear height adjustment at each location allows the hinge system to share the door load while still delivering accurate alignment. Minor variations in drilling or case construction can be compensated by setting each plate using the worm gear, instead of relocating fasteners. The combination of euro screws, 2-point fixing, and worm gear adjustment integrates the mounting and fine-tuning steps into the hinge plate itself, which supports a more controlled installation sequence on shop-built or site-assembled cabinets.

Common Tiomos Mounting Plate Questions Answered

Selecting This Mounting Plate For Tiomos Hinges

The Grass America Tiomos adjustment wing mounting plate with pre-mounted euro screws combines 9.5mm plate height, 2-point fixing, and worm gear height adjustment in a nickel-plated zinc die-cast and steel body. That set of details gives cabinet builders and installers a defined hinge mounting level and precise vertical adjustment directly at the plate. For Tiomos hinge projects built around euro-style drilling patterns, this screw-on hinge mounting plate from Wurth Baer Supply offers a structured way to mount and fine-tune doors using the cabinet bore layout as the reference. Select this F058139882217 wing mounting plate when the job calls for a Tiomos plate that integrates euro screw fastening and worm gear height control into the hinge stack.