Tiomos Adjustment Wing Mounting Plate For Precise Hinges

Tiomos adjustment wing mounting plate from Grass America is a hinge mounting plate designed for Tiomos applications, so it anchors the hinge arm and sets the door position in a consistent way across cabinets. This mounting plate uses 2-point fixing, which stabilizes the plate on the cabinet and helps keep alignment steady during hinge installation and later adjustments. The plate height is 12mm, so it establishes a fixed baseline between cabinet side and hinge arm that matters when matching drilling patterns and overlay layouts on a run of doors. The screw-on design means the plate fastens directly with Euro screws, giving a solid metal-to-wood connection that supports repeated opening cycles. The nickel-plated zinc die-cast and steel construction provides a hard, smooth surface at the hinge connection, which supports clean hinge movement where the parts meet.

Mounting Plate Details That Support Daily Use

• The 12mm wing mounting plate height defines the gap between cabinet side and hinge arm, which is important when repeating the same reveal and overlay across multiple doors in a project.
• 2-point fixing on the mounting plate locates the part at two positions, which helps resist twisting during hinge installation and keeps the hinge reference lines stable over time.
• Height adjustment via worm gear at the plate gives a controlled, mechanical way to move the door position vertically, which matters when fine-tuning gaps after doors and hardware are installed.
• The screw-on mounting style uses Euro screws with the plate, so the installer works with a consistent thread and head style that suits standard system holes in cabinet panels.
• The nickel-plated zinc die-cast and steel construction provides a hard, corrosion-resistant contact surface, which supports long-term function where the hinge arm locks onto the mounting plate.

Screw-On Mounting And Worm Gear Adjustment Setup

This screw-on Tiomos mounting plate fastens with Euro screws, so it is suited to cabinet sides prepared for Euro screw installation. Using a 12mm plate height, the Grass America hinge mounting plate sets a consistent offset that simplifies layout when boring hinge cups and system holes relative to door edge and cabinet front. Height adjustment via worm gear means the plate has an integrated mechanical adjuster, so the door can be raised or lowered in controlled increments while the hinge stays mounted. The 2-point fixing layout stabilizes the plate as those adjustments are made, which helps hold alignment when dialing in margins between doors, drawers, and face frames in a project.

How This Mounting Plate Works In Projects

Where The Tiomos Wing Mounting Plate Is Used

This 12mm wing mounting plate is used wherever a Tiomos hinge system needs a mounting point on the cabinet side, so it serves as the fixed interface between cabinet case and hinge arm. As a hinge mounting plate in the Hinge Mounting Plates class, it belongs in cabinet and furniture projects that use Tiomos hinges from Grass America. The 2-point fixing system and screw-on Euro screw installation work with cabinet panels drilled for Euro screws, so it ties directly into standard system construction. Because the plate height is 12mm, it suits layouts designed around that specific offset, which matters when matching door overlays and reveals from cabinet to cabinet. In practice, the nickel-plated zinc die-cast and steel construction provides a robust connection point where the hinge arm locks to the case, so the door loads transfer into a stable mounting base.

Why Height Adjustment Via Worm Gear Matters

The height adjustment via worm gear in this mounting plate provides a fine, repeatable way to move the door vertically once the hinge is installed, so adjustments can be made without shifting the entire plate on the cabinet. Because the adjustment is built into the plate, the installer can correct minor drilling tolerances or door warp while using the same Tiomos adjustment wing mounting plate across a job. The 2-point fixing helps the worm gear work effectively, since the plate stays anchored as the door height is dialed in. When combined with the 12mm plate height, this adjustment system lets the installer align multiple doors along a run, so reveals stay even from top to bottom. The nickel-plated zinc die-cast and steel build keeps the adjustment interface metal-to-metal, which supports consistent movement at the worm gear over service life.

Common Questions About This Grass Mounting Plate

Selecting This Plate For Tiomos Hinge Layouts

The Tiomos adjustment wing mounting plate with pre-mounted Euro screws, 2-point fixing, and 12mm height provides a defined hinge reference for Tiomos systems, so it suits projects built around that height and fixing pattern. Height adjustment via worm gear on a nickel-plated zinc die-cast and steel body offers precise door positioning with a solid metal interface. When a project calls for the Grass America F058139874217 mounting plate, this screw-on Euro screw design keeps the hinge system consistent from cabinet to cabinet.