Round Wire Grommets 1-7/8 Bore For Cable Runs

Round Wire Grommets 1-7/8 Bore from Custom Accents are three piece plastic grommets designed to manage wires through a 1-7/8 inch bore hole, so cables pass through surfaces while the hole stays controlled and finished. Each grommet uses a grommet cap, rotary cap and hole liner working together, so the wire opening is shaped by the cap while the liner protects the bore edge. The rotating liner enables the grommet cap wire opening to be adjusted to three positions; closed, half open and fully opened, so you can match the opening to the actual number of wires in the run. Liner depths are 1 inch, giving a defined sleeve through the panel that helps keep wires centered in the hole as they pass through a desktop, shelf, or similar surface. The almond color plastic provides a neutral look that blends easily with many light-toned worktops.

Key Three Piece Plastic Grommet Advantages

• This style grommet has three pieces; grommet cap, rotary cap and hole liner, so the cap presents a clean visible ring while the rotary cap and liner manage cables inside the bore for a tidy feed-through point.
• The rotating liner enables grommet cap wire opening adjustment to closed, half open and fully opened, so you can close the opening when unused, partially open it for a few cords, or fully open it for larger bundles.
• Liner depths are 1 inch, so the plastic sleeve spans the thickness of many common work surfaces, helping guide wires smoothly and reducing contact with raw panel edges.
• Grommets are available in 1-7/8 inch bore hole diameter, so when the correct size hole is machined the grommet seats into the opening and defines a consistent pass-through location.
• The Custom Accents plastic construction described for this round wire grommet creates a uniform molded fit between the grommet cap, rotary cap and hole liner, which supports repeatable installations across multiple workstations.

Installation Fit For 1-7/8 Inch Bore Holes

Grommets are available in 1-7/8 inch bore hole diameter, so the panel opening must match this measurement for the Custom Accents CPF-2504 grommet to sit properly in the hole and support the rotary action of the cap. Liner depths are 1 inch, so panels in this thickness range allow the liner to act as a full-depth sleeve around the wiring path. This style grommet has three pieces; grommet cap, rotary cap and hole liner, so installation is a matter of positioning the liner in the bore, then fitting the rotary cap and grommet cap so the assembly locks against the panel surface. The rotating liner enables grommet cap wire opening adjustment after installation, so the opening can be set to closed, half open or fully opened without altering the bore.

Using Custom Accents CPF-2504 Grommets In Workspaces

Where This Round Wire Grommet Works Best

Round Wire Grommets, 1-7/8 Bore Hole Three Piece Plastic by Custom Accents are part of the Multimedia and Workspace Components category, so they are suited to routing cords through desks, counters, or similar work surfaces in offices and shop environments. The almond color described in the SAP record for this CPF-2504 grommet matches many light laminate and wood finishes, so the visible grommet cap presents a coordinated appearance at the cable exit point. Liner depths are 1 inch, so this round wire grommet fits panels in that thickness range often used for desktops, shelves and worktops in woodworking projects. This style grommet has three pieces; grommet cap, rotary cap and hole liner, so each installed position provides both a finished edge on the surface and a guided path inside the bore for power and data cables.

Why Adjustable Three Position Opening Matters

The rotating liner enables grommet cap wire opening to be adjusted to three positions; closed, half open and fully opened, so the same Custom Accents CPF-2504 grommet can serve jobs ranging from a single cable pass-through to a full bundle at a workstation. When set to closed, the cap covers the bore to limit open gaps when no cords are present, which keeps the work surface looking continuous. In the half open position, the cap presents a smaller opening that helps group a few wires while covering unused portions of the hole. In the fully opened position, the cap exposes the full wire opening so larger harnesses can pass through without pinching. Liner depths are 1 inch, so throughout these adjustments the bore edge remains lined by plastic, maintaining a consistent contact surface for wires while you rotate the cap between positions.

Common Questions About CPF-2504 Wire Grommets

Selecting This Grommet For Your Next Run

The Custom Accents Round Wire Grommets, 1-7/8 Bore Hole Three Piece Plastic CPF-2504 combine a 1-7/8 inch bore fit with a 1 inch deep liner and a three-position rotating wire opening, so each opening in your project can be tailored to its cable load. By matching panels that work with the 1 inch liner depth and machining a 1-7/8 inch bore, you gain a repeatable wire pass-through using the grommet cap, rotary cap and hole liner assembly. For desks, counters, or shop worktops using almond finishes, this CPF-2504 round wire grommet from Wurth Baer Supply provides a defined, adjustable cable path at each planned opening.