50mm Wire Grommet, Brown
Description
50mm Wire Grommet Brown For Clean Cable Runs
50mm wire grommet brown from Custom Accents is a three-piece grommet designed to manage wires through a 1-7/8 inch bore hole, giving cabinets, desks, and work surfaces a finished cable pass-through point. The grommet cap, rotary cap, and hole liner work together so wires route through a consistent opening while the edge of the bore stays protected. The rotating liner allows the wire opening in the grommet cap to be set to closed, half open, or fully opened, which controls how tightly wires are grouped in the pass-through. The brown finish helps this grommet blend into darker shelves, closets, and multimedia furniture where visible hardware needs to stay low profile. A manufacturer part number of CPF-2502 identifies this specific 50mm Custom Accents grommet for repeat orders or matching across multiple workstations or cabinets.
Key Grommet Details For Organized Wiring
- This style grommet has three pieces - grommet cap, rotary cap, and hole liner - so the installer gains a stable liner in the bore and a removable cap assembly for routing and later changes.
- The rotating liner enables the grommet cap wire opening to be adjusted to three positions: closed, half open, and fully opened, helping control cable exposure and movement at the work surface.
- Liner depths are 1 inch, giving the bore edge a continuous plastic surface through common panel thicknesses and helping guide wires cleanly through the opening.
- Grommets are available in 1-7/8 inch bore hole diameter, aligning with a standard drilled hole size so installers can plan bore operations and layout before running cables.
- The brown color aligns with darker closet, shelf, and multimedia components, helping the grommet visually recede while still providing a defined wire pass-through location.
Installation Fit For 1-7/8 Inch Bore Openings
This Custom Accents wire grommet is sized for a 1-7/8 inch bore hole diameter, so installers can drill that single size and know the liner will seat against the wall of the cutout. With liner depths of 1 inch, the grommet supports typical cabinet, desktop, and shelf material thicknesses while still creating a guided channel through the bore. The three-piece structure - grommet cap, rotary cap, and hole liner - means the liner first establishes a fixed sleeve in the hole, then the cap and rotary cap drop in to finish the opening. This structure helps keep the bore edge covered and reduces direct wire contact with raw material edges during regular use.
Using This Three Piece Grommet In Projects
Where This 50mm Wire Grommet Brown Works
The brown 50mm wire grommet from Custom Accents is part of the Shelf, Closet & Garage Organization and Multimedia and Workspace Components category, so it suits closet systems, garage work areas, and multimedia stations that need cable routing points. As a grommet in the Grommets product class, it creates a controlled passage where power cords, data cables, or low-voltage lines pass through panels, reducing wear at the edge of the 1-7/8 inch bore. The 1 inch liner depth allows it to perform in common panel builds where installers want cables guided straight through rather than rubbing against unfinished material. Its brown color lets it sit in darker laminates or wood tones, keeping the wire opening functional without drawing attention on finished surfaces.
Adjustment Features That Support Clean Cable Layouts
This three piece wire grommet uses a rotary cap and liner system so the wire opening in the grommet cap can be adjusted to closed, half open, or fully opened. In the closed position, the pass-through is visually sealed, which helps projects stay clean when cables are removed but the bore remains. In the half open position, the cap grips around fewer or thinner cords, controlling movement at desktops or shelves while still allowing service access. In the fully opened position, the cap clears a wider path for multiple cables or larger plugs through the 1-7/8 inch bore, giving flexibility during initial equipment setup. Because the liner depth is 1 inch, these three positions operate along a stable sleeve that maintains the bore dimension and helps reduce edge contact on the cables across the life of the installation.
Common Questions About CPF-2502 Wire Grommet
What bore hole size does the CPF-2502 grommet fit?
The CPF-2502 wire grommet is specified for a 1-7/8 inch bore hole diameter, so drilling that size creates the opening that the hole liner is designed to occupy in the panel.
How does the rotary cap wire grommet adjust for cables?
The rotary cap wire grommet uses a rotating liner that positions the cap opening in three settings - closed, half open, or fully opened - so cable groups can be managed at different densities.
What is the liner depth on this Custom Accents grommet?
The Custom Accents CPF-2502 grommet has liner depths of 1 inch, giving a stable sleeve through the bore that helps guide and protect wires as they pass through the panel.
Where is a brown 50mm wire grommet typically used?
The brown 50mm wire grommet is categorized for shelf, closet, garage, multimedia, and workspace components, suiting darker furniture and storage systems that require organized cable openings.
What are the three pieces of this wire grommet?
This style wire grommet is described as three pieces: a grommet cap, a rotary cap, and a hole liner, working together to finish and control the 1-7/8 inch bore opening.
What does the part number CPF-2502 identify?
The CPF-2502 part number identifies this specific Custom Accents 50mm brown wire grommet, helping match the same model across repeat installations and future service work.
Select This Grommet For Adjustable Cable Pass-Throughs
The Custom Accents 50mm wire grommet brown with CPF-2502 part number combines a 1-7/8 inch bore fit, 1 inch liner depth, and three-position rotary cap into one component, giving installers a defined way to route, open, or close cable paths across closet, garage, and multimedia surfaces.