Deltana solid brass cabinet hinges come in an array of fine finishes with ball tip finials as standard, giving cabinet doors a finished look while supporting consistent movement. This model is a full mortise hinge, so the leaves sit neatly into the cabinet and door edges, helping maintain clean sightlines on face-frame or frameless work. The hinge size of 2-1/2 x 2-1/2 inches suits small to medium cabinet doors where a compact but solid hinge is needed. The semi-concealed hinge design keeps hardware presence low while still allowing easy visual alignment during layout. A satin nickel finish provides a neutral, modern appearance that pairs with many common cabinet pulls and knobs in shop and residential projects.
The full mortise mounting type means both hinge leaves recess into the cabinet and door edges, so your layout focuses on accurate mortise depth and hinge setback rather than surface shimming. At 2-1/2 x 2-1/2 inches, this hinge size suits cabinet doors where you want the leaf to sit fully inside a modest rail or stile width. The .093 inch hinge thickness gives you a clear target depth when routing or chiseling, which helps doors close flush along the front of the cabinet. With six hinge holes designed for #7 x 3/4 inch wood screw use, the fastener pattern supports a firm grip into typical cabinet materials.
This hinge is part of the semi-concealed hinges class, so it is well suited to cabinets where you want minimal visible hardware but still value straightforward alignment. The 2-1/2 x 2-1/2 inch footprint works on many small to medium cabinet doors in kitchens, baths, and shop storage where rail and stile widths are limited. Because it is a full mortise hinge with square corners, it pairs well with routed mortises cut using straight bits, letting door and frame edges register cleanly against the hinge leaf. Solid brass construction supports use on wood cabinet doors where a metal-to-wood interface is preferred. The satin nickel finish presents a muted metallic tone, which lets hinges blend into common painted or stained cabinet finishes while coordinating with other satin nickel cabinet components.
The hinge thickness of .093 inch provides a predictable leaf dimension, so repeated mortises can be cut to the same depth across a bank of doors, helping margins stay consistent from door to door. With six holes in each hinge sized for #7 x 3/4 inch wood screw use, load is distributed across multiple fastener points, which supports alignment over time as doors are opened and closed. The square corner design means the mortise corners match a straight router bit profile, reducing corner fitting work and helping each hinge seat flat in its pocket. Ball tip finials come as standard on these cabinet hinges, giving the hinge knuckle a finished termination that reads cleanly when the door is open. The satin nickel finish, paired with solid brass beneath, offers a visual and material combination suited to many cabinet environments where appearance and function both matter.
The CH2525U15 is a Deltana solid brass cabinet hinge in the semi-concealed hinges class, so it serves applications where low-profile cabinet hardware is preferred.
The hinge measures 2-1/2 x 2-1/2 inches, fitting many small to medium cabinet doors where a compact, full mortise hinge is needed at the door edge.
This hinge uses a full mortise mounting type, so both leaves sit in routed or chiseled pockets in the door and cabinet, supporting a flush, tidy installation.
The CH2525U15 is designed for #7 x 3/4 inch wood screw use, and the six hinge holes allow those screws to secure the leaves to typical cabinet materials.
The hinge uses square corners, which suit mortises cut with straight router bits and support clean, rectangular pockets at the door and frame edges.
The satin nickel finish provides a neutral metallic look that coordinates with many cabinet pulls and knobs, helping hinge hardware blend into modern cabinetry.
The Deltana solid brass cabinet hinges in satin nickel with full mortise mounting, square corners, and .093 inch thickness provide a defined set of dimensions to work from on cabinet projects. When a 2-1/2 x 2-1/2 inch semi-concealed hinge with ball tip finials and six #7 x 3/4 inch wood screw holes aligns with your door sizes and layout approach, the CH2525U15 gives you a consistent pattern to repeat across a run of cabinets. Put these details to work on your next installation where a compact satin nickel hinge suits the design.