Deltana full mortise cabinet hinge CH2525U26D is a solid brass cabinet hinge in a brushed chrome finish, so a woodworking or cabinet shop can match metal appearance while using a brass base material. The 2-1/2 x 2-1/2 inch size defines the hinge leaf dimensions, which helps a fabricator plan door and frame layout on smaller cabinet doors. This hinge is part of Deltana solid brass cabinet hinges that come in an array of fine finishes with ball tip finials as standard, so the installer gets a decorative ball tip style while staying within one hinge family across a project. Being a full mortise hinge means the leaves sit into mortised pockets, which keeps the hinge more flush with the cabinet surfaces for a cleaner finished look on face-frame or similar work.
This Deltana solid brass cabinet hinge uses a full mortise mounting type, so both the door edge and the cabinet frame are cut to accept the leaves for a more integrated fit. The 2-1/2 x 2-1/2 inch dimensions define the hinge footprint, helping a shop position hinge locations consistently across multiple doors. Square corners on the hinge mean the mortises can be cut with straight edges, which suits jig-guided routing followed by simple chisel cleanup. The 0.093 inch hinge thickness directly affects the mortise depth, so a fabricator can cut to that thickness to keep the leaf faces flush with the wood surfaces for a cleaner cabinet line.
The Deltana Enterprises CH2525U26D hinge is identified as a solid brass cabinet hinge, so it is suited to cabinet applications where a brass base metal is desired under a brushed chrome finish. Its 2-1/2 x 2-1/2 inch sizing aligns with smaller cabinet doors, allowing the hinge to sit proportionally on face-frames and door edges without dominating the stile width. Being a full mortise hinge means each leaf is set into a cutout on the door and frame, which suits cabinetry where the hardware is expected to sit more flush rather than surface mounted. The semi-concealed hinge classification places it among semi-concealed face-frame hinges, so part of the hardware is visible for the brushed chrome look while portions sit in the mortise.
The CH2525U26D hinge uses square corners, giving installers a clear guideline for mortise geometry so doors can be laid out using straight-edged mortising templates and chisel techniques that repeat well across multiple openings. The specified 0.093 inch hinge thickness defines how deep to cut those mortises, which helps maintain even reveals and prevents binding as doors operate. With 6 holes in the hinge leaves, the screw pattern distributes holding power, which supports stable mounting on typical cabinet door materials. The hinge is associated with #7 x 3/4 inch wood screw use, so the screw gauge and length align with common cabinet door stock thicknesses. A brushed chrome finish on solid brass combines a selected surface appearance with a brass core, which supports projects where finish coordination and base metal choice both matter across the run of cabinets.
The CH2525U26D cabinet hinge is 2-1/2 x 2-1/2 inches, so a shop can size mortises and door layouts around that footprint on smaller cabinet doors.
This hinge uses a full mortise mounting type, so both door and frame edges are cut to seat the leaves for a more integrated cabinet fit.
The hinge has square corners, which supports straight-edged mortising methods and simplifies chisel work at the hinge pockets.
The hinge leaf thickness is 0.093 inch, giving a clear target depth for mortises and helping maintain consistent door reveals on cabinets.
The hinge is associated with #7 x 3/4 inch wood screw use, which suits typical cabinet door materials when fastening through the 6 hinge holes.
This Deltana cabinet hinge has ball tip finials as standard, adding a defined ball-ended detail at the hinge ends for a finished cabinet appearance.
The Deltana Enterprises CH2525U26D solid brass cabinet hinge in brushed chrome pairs a 2-1/2 x 2-1/2 inch full mortise format with square corners, 0.093 inch leaves, and ball tip finials, giving cabinet shops defined dimensions and visual details. When a project calls for a semi-concealed hinge with this specific size, finish, and mortise style, choosing this part number lets you match layouts, screw patterns, and appearance from door to door across the cabinet run.