Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Deltana solid brass cabinet hinges give a free swinging, full mortise action that lets doors move smoothly through their arc, which helps cabinets open and close consistently on jobs where feel and alignment matter. This CH3020U15 hinge has a 3 inch by 2 inch leaf size, so it suits layouts designed around that footprint where hinge sizing is already established. The hinge uses a semi-concealed design in the full mortise category, so most of the hardware sits in the cutout while key elements stay visible for a traditional cabinet look. Ball tip finials are standard on this hinge, which finishes off the barrel ends with a defined detail that matches classic hardware lines. The satin nickel finish on the solid brass base material provides an understated metallic look, supporting projects that call for that specific finish across visible cabinet hardware.
The full mortise mounting type on the CH3020U15 hinge means the leaves are designed to sit fully into routed or chiseled pockets in the cabinet door and frame, which lets the knuckle line define the gap while the leaves stay flush with the wood surface. Square corners on the hinge match square-cut mortises, so crews using jigs or routers that cut right-angle corners can drop the hinge in without rounding operations. The hinge leaf thickness is listed at 0.093 inch, giving installers a known depth to remove when setting up mortise passes so the door edge and frame line stay even after installation. This hinge uses six holes in the leaf, which distributes load across multiple fastener points and helps keep the hinge seated under normal cabinet use.
The CH3020U15 hinge sits in the Semi-Concealed Hinges product class, so it is suited to cabinet work where most of the hinge is buried in the mortise while the knuckle and finials remain visible. That layout works well on face-frame and cabinet constructions that call for a traditional hinge line, because the barrel becomes a design element instead of hiding entirely. The 3 inch by 2 inch size gives a compact footprint that fits many cabinet doors without overpowering the stile, so it supports small to mid-size cabinet faces. Being a full mortise hinge, it ties into doors and frames that are already designed for recessed leaf hardware, which keeps the door edge alignment consistent with other full mortise components on the same project. The satin nickel finish on solid brass lets installers match this hinge with satin nickel knobs, pulls, and other visible hardware, creating a unified appearance across all opening points in a room.
The 0.093 inch hinge thickness provides a clear target depth for routing or mortising, which helps crews repeat the same setting across multiple doors and frames without trial passes. Six holes in the hinge leaf define the fastener pattern, so drilling guides or jigs can be built around that layout for faster line production. The specified wood screw size of #7 by 3/4 inch gives installers a direct match for pilot hole sizing and bite depth into typical cabinet materials, which supports firm seating of the hinge without over-penetration through standard door stiles. Square corners on the hinge mean jigs can be cut to simple straight profiles, which speeds template building and keeps corner cleanup to a minimum. Because the hinge is described as free swinging, the door movement depends on the hinge geometry rather than any built-in damping, so installers can predict how the door will behave once aligned and fastened. Ball tip finials as standard eliminate the need to source separate decorative tips for the hinge barrel, which simplifies ordering and keeps the installed look consistent from hinge to hinge on a run of cabinets.
The CH3020U15 is a Deltana solid brass cabinet hinge described as free swinging, full mortise, and semi-concealed, so it suits recessed cabinet door installations with a visible hinge barrel.
The CH3020U15 hinge is listed as 3 inch by 2 inch, so door and frame layouts can be planned or matched around that hinge leaf footprint.
The full mortise mounting means the hinge leaves recess into door and frame cutouts, keeping the leaves flush and letting the hinge knuckle control the visible gap line.
This hinge is made from solid brass with a satin nickel finish, so it pairs with other satin nickel cabinet hardware while keeping a brass base metal under the finish.
The hinge has square corners and six holes in the leaf, which suits square-cut mortises and distributes fastener load across multiple points.
The hinge specifies #7 by 3/4 inch wood screws, giving installers a clear fastener size for pilot hole drilling and bite depth on cabinet doors and frames.
The Deltana solid brass cabinet hinges CH3020U15 bring a 3 inch by 2 inch, full mortise, semi-concealed design with ball tip finials and a satin nickel finish, so they fit cabinet projects needing that exact size, material, and look. Use this hinge when the layout calls for solid brass construction with a satin nickel surface, square corners for straight-cut mortises, and a free swinging action that lets doors move cleanly on a defined knuckle line. For cabinet runs that repeat these details across many openings, choosing this hinge keeps the visual line, mortise depth, and fastener setup consistent from one installation to the next.