Deltana solid brass cabinet hinges give a cabinet door a solid pivot point, so the door swings freely and consistently every time. These hinges are part of Deltana Enterprises, Inc. semi-concealed hinges line, so the hardware keeps a low profile while still doing the structural work on face-frame cabinetry. The hinge is described as full mortise, so both the door edge and frame receive matching mortises that seat the leaves flush and keep the door alignment controlled. Ball tip finials are standard on these hinges, so each barrel ends cleanly to finish off the hinge line on exposed cabinet ends. The polished chrome finish on the solid brass base metal provides a bright look on the hinge leaves while the brass underneath carries the structural load at the knuckle.
The mounting type listed as full mortise means both the cabinet door edge and the frame are routed or chiseled so the leaves sit flush, which helps keep the door from binding on the frame during swing. The square corners specification ties into that setup, because straight-corner mortises can be laid out quickly with a marking gauge and finished with a chisel rather than fitting to a radius. The hinge thickness of .093 inch determines how deep those mortises run, so cutting to that depth brings the hinge surface level with the surrounding wood and helps keep the gap between door and frame consistent along the edge. The six hinge holes give multiple screw locations on each leaf, so each screw can be driven into solid material along the stile and frame edge during installation.
The product is classified as a semi-concealed hinge in the hinges category, so it sits partly in the wood and partly visible on the cabinet, which suits face-frame applications where some hinge hardware remains in view. The category path lists full mortise hinges, so this hinge fits projects that are already laid out for mortised leaves rather than surface-mount hardware. The SAP description identifies it as a 3 x 2 hinge, so the leaf dimensions match small cabinet and furniture door layouts where compact hardware is preferred. The polished chrome finish works with solid brass cabinet hinges construction to bring a finished look to exposed hinge edges while the brass material at the core handles the repetitive door movement at the pivot over the service life.
The manufacturer part number CH3020U26 ties directly to this Deltana Enterprises, Inc. hinge configuration, so matching that code helps keep hinge style and finish consistent across a bank of cabinets during a project. The wood screw designation of #7 x 3/4 inch defines the shank and length for the hinge fasteners, which supports predictable bite into typical cabinet-grade material and helps maintain clamping across the leaf. The .093 inch hinge thickness gives a fixed reference when setting mortise depth, so once the first opening is tuned, the same depth setting can be carried across additional doors for uniform alignment. Ball tip finials as standard mean every hinge barrel on a run of doors presents the same finished end, which keeps the visual line consistent wherever the knuckle is visible on cabinetry or furniture.
The CH3020U26 is a Deltana solid brass cabinet hinge classified as a semi-concealed full mortise hinge, so it suits applications where the leaves sit in mortises with part of the hinge still visible.
The full mortise mounting on this hinge places both leaves flush into the door and frame, helping maintain clean reveal lines and keeping the door from rubbing as it swings.
The square corners on the hinge leaves align with straight-edged mortises, allowing the pockets to be cut with chisels or suitable bits so the leaves seat tight without corner gaps.
The #7 x 3/4 inch wood screw specification indicates a moderate shank and length that suits typical cabinet doors and face frames, providing bite without extending too deeply into the stock.
These solid brass cabinet hinges are .093 inch thick, giving the leaves and knuckle more material to handle repeated door cycles and maintain alignment under normal cabinet use.
The ball tip finials on this hinge finish the barrel ends with a rounded detail, giving exposed hinge knuckles a completed look on cabinets and furniture pieces.
The Deltana solid brass cabinet hinges in polished chrome bring full mortise mounting, square corners, and .093 inch leaf thickness together in one configuration, so a cabinet run can be laid out around a consistent hinge spec. The CH3020U26 designation identifies this 3 x 2 hinge with ball tip finials, so matching this part keeps both function and appearance aligned on every door in the job.