Omega National 30"W Maple Straight Accent Wall Mount Range Hood, Broan Compatible Liner Included - R5330SMB1MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR5330SMB1MUF1 to RSR5330SMB1MUF1.

Omega National Wood Range Hood For Custom Mantels

Omega National wood range hood R5330SMB1MUF1 is a maple straight accent wall mount range hood designed to create a mantel-style focal point over a cooking area. The hood design allows you to add doors and accent panels of your choice above the valance, which lets you match surrounding cabinetry and maintain a consistent run on the wall. Three height options - 24 inches tall, 30 inches tall, and 36 inches tall - give flexibility to align the hood with varying cabinet heights or ceiling conditions. Available 30 inch and 36 inch widths support common cooktop and cabinet layouts, which helps the hood tie into standard wall cabinet runs. The hood offers either straight or arched valances, so you can match a preferred visual style while using the same basic structure.

Range Hood Details That Support Cabinet Design

• This accent wood range hood is available in 30 inch and 36 inch widths, which aligns with typical cooktop sizes and cabinet modules, helping wall runs stay visually balanced.
• The hood offers a choice of straight or arched valances, letting you mirror nearby door styles or arches so the hood reads as part of the overall cabinet design.
• The hood uses a design that simply attaches to adjacent cabinets, which integrates the unit into the wall run and creates a unified mantel-style installation.
• Three heights - 24, 30, and 36 inches tall - give vertical flexibility, so the hood face can meet different cabinet heights or soffit conditions without changing the basic model.
• The maple construction option listed for this model supports staining or finishing to coordinate with maple cabinetry or contrast other species in the same kitchen.
• The hood is described as an economical alternative to stand alone hoods, which allows mantel-style projects to stay within tighter project budgets.

Wall Mount Hood Fit, Heights, And Attachment

This accent wood range hood is described as a wall mount range hood, so it is intended to sit against a wall in line with surrounding cabinets. The hood simply attaches to adjacent cabinets, which means the side walls of nearby cabinets act as the connection points and help carry the assembly visually. Three available heights - 24 inches, 30 inches, and 36 inches - are built around the same style, providing options to align the bottom or top of the hood with standard cabinet rows or trim. Width choices of 30 inches and 36 inches allow the hood body to span typical cooking widths, so the hood presence matches the scale of the appliance zone.

Using This Straight Accent Wall Mount Range Hood

Where This Mantel Style Wood Range Hood Works

This straight accent wall mount range hood is described as part of the wood range hoods category, which positions it for kitchen wall runs where a wood mantel look is desired above cooking equipment. The design allows you to add cabinet doors or design panels above the valance, so the hood can serve as the lower mantel section while upper doors carry storage or decorative roles. The hood is offered in species including Cherry, Maple, Red Oak, White Oak, Hickory, and Alder, which gives flexibility to coordinate with a variety of cabinet programs or to create deliberate wood contrasts. For this specific product, maple is the listed species, making it suitable for projects where maple fronts or trim are already in use. Because it is described as an economical alternative to stand alone hoods, it fits projects where a built-in, custom mantel look is required without moving to a fully independent hood structure.

Why Height, Width, And Liner Details Matter

The three height options - 24, 30, and 36 inches tall - let a designer select a hood face that matches planned cabinet stacking, so crown lines and upper cabinet bottoms stay consistent across the wall. Width selections of 30 inches and 36 inches allow the hood to match common appliance widths, which keeps the hood proportionate to the cooking area and cabinet layout. The product description specifies that a silver metallic liner is included and that this liner is compatible with all Broan ventilation available through Omega National Products, meaning the liner is engineered to pair with Broan ventilation units sourced from the same channel. This compatibility simplifies planning the ventilation insert, because Broan ventilation models available through Omega National Products are described as supported by the liner. By combining a maple wood shell, multiple face heights, and a Broan compatible liner, the hood supports both visual design and integration with a ventilation system within the same product family.

Buyer Questions About This Omega National Wood Hood

Select This Maple Hood For Mantel Style Projects

This Omega National 30 inch maple straight accent wall mount range hood suits projects where a wood mantel-style installation is planned over a cooking zone. The ability to add doors and accent panels above the valance lets the hood face integrate into a broader cabinet design. Height choices of 24, 30, and 36 inches and widths of 30 and 36 inches help align the hood with standard cabinet layouts. The silver metallic liner, described as compatible with all Broan ventilation available through Omega National Products, supports pairing the wood hood with a coordinated ventilation system. For projects needing a wood range hood that visually ties into existing cabinets while remaining an economical alternative to stand alone hoods, this model offers a focused solution.