Omega National 30"W Alder Straight Accent Wall Mount Range Hood, Broan Compatible Liner Included - R5330SMB1QUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR5330SMB1QUF1 to RSR5330SMB1QUF1.

Accent Wood Range Hood For Custom Mantels

Accent wood range hood from Omega National Products creates a mantel-style focal point by letting you add doors and accent panels above the valance, so the hood becomes part of a continuous wall cabinet run. The 30 inch width is sized for standard cooking areas, helping align the hood with a typical 30 inch cooktop layout. The design is a wall mount range hood, so it anchors directly between adjacent cabinets and keeps the front face flush with surrounding casework. This model uses Alder, giving installers a workable hardwood that stains to a wide range of kitchen finishes. The hood is part of Omega National wood range hood offerings, which helps match other wood components in a project. As a straight accent hood, it provides clean lines for kitchens where a simple profile suits the overall cabinet style.

Key Range Hood Details For Cabinet Projects

• The hood offers three height options of 24, 30, and 36 inches, providing installers flexibility to align the bottom of the hood with target sight lines and to work around ceiling and crown molding conditions.
• Two width choices of 30 and 36 inches let you pair the hood span with common cooktop sizes, which supports correct capture area planning across different kitchen layouts.
• Straight or arched valance styles are available, so you can match the hood profile to door styles and panel shapes already used in the rest of the cabinetry.
• The hood simply attaches to adjacent cabinets, which helps tie load paths into existing boxes and can streamline layout when setting reveals and face frame alignment.
• An economical alternative to stand alone hoods, this cabinet-style unit supports projects where you want a built-in appearance while managing total project cost.
• The hood is available in Cherry, Maple, Red Oak, White Oak, Hickory, and Alder, allowing you to coordinate wood species with surrounding cabinets for a consistent finish schedule.

Wall Mount Hood Fit And Installation Use

The hood is described as a straight accent wall mount range hood, so its geometry is intended to sit flat against the wall between cabinets rather than projecting on a separate chimney structure. Because it simply attaches to adjacent cabinets, the layout process focuses on cabinet spacing and face alignment instead of building an independent support frame. The availability of 24, 30, and 36 inch heights lets you position the hood to coordinate with upper cabinet heights, helping maintain a straight top line along the wall. Width options of 30 and 36 inches help you size the hood to the cooking surface below, which is important for planning the surrounding cabinet modules. Using Alder on this model allows onsite finishing to bring the hood into the same color family as other Alder components in the room.

Using This Omega National Hood In Projects

Where This Wood Range Hood Works Best

This Omega National wood range hood fits projects where the hood is meant to look like part of the cabinet run rather than a separate appliance shell. The design allows you to add doors or design panels above the valance, so the area above the hood can hold functional storage or decorative panels that mirror adjacent wall cabinets. Because the hood is available in 30 and 36 inch widths, it works well over common residential cooking appliances where coordinated sizing matters to the overall elevation. The option for straight or arched valances also suits both traditional and more contemporary cabinet programs, since you can choose a curve for softer lines or a straight rail for simpler profiles. With species options covering Cherry, Maple, Red Oak, White Oak, Hickory, and Alder, the hood can be integrated into a broad range of wood programs in both remodels and new builds, helping maintain visual continuity across large kitchen runs.

Details That Support Reliable Hood Results

The ability to select from three heights - 24, 30, and 36 inches - supports consistent headroom and line-up with standard cabinet heights, which helps avoid odd step-ups or filler strips at the top of a run. Because the hood simply attaches to adjacent cabinets, installers can work within known cabinet installation practices and use the neighboring boxes as reference for plumb and level. The silver metallic liner is compatible with all Broan ventilation offered through Omega National Products, which gives a defined path for pairing internal ventilation components to the wood shell. That compatibility helps streamline specification when you want the Broan ventilation performance inside a custom-looking wood exterior. Using Alder on this specific straight accent wall mount range hood provides a stable, stain-grade surface, so finishing trades can tune color and sheen to the rest of the Alder cabinetry for a unified appearance.

Common Questions About This Omega National Hood

Selecting This Hood For Your Next Kitchen Run

Choose this Omega National wood range hood when you need a 30 inch wall mount unit that visually ties into surrounding cabinets and supports a mantel-style design above the cooking area. The ability to attach directly to adjacent cabinets, select from multiple heights, and work with a silver metallic liner compatible with Broan ventilation through Omega National Products all support efficient planning on both remodel and new construction projects. The Alder construction on this specific model, along with the broader species availability in the line, lets you align wood selection and finishing with the rest of the kitchen, so the hood reads as part of a unified cabinet system.