Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EH Series 2 inch counter support face plate is a clear anodized aluminum plate designed to work with Rakks EH-1818, EH-1824, EH-1212 and EH-1209 flush-mount counter supports, so it finishes the exposed arm area on those specific brackets. The plate is adhesive backed, so it bonds directly over the supporting arm surface without separate mechanical fastening steps, turning the structural support into a smooth facing. The aluminum plate measures 2 inches by 2 inches by 1/4 inch thick, so it covers the typical arm footprint while adding a defined edge profile at the support. The clear anodized finish protects the aluminum surface while presenting a neutral metallic appearance that blends with many counter layouts. This face plate is part of the Rakks EH Series counter support solution, so it aligns with that system where those bracket models are used beneath counters.
The EH Series 2 inch counter support face plate is adhesive backed, so it attaches by pressing the plate over the supporting arm of the bracket instead of relying on separate fasteners through the face. This adhesive-backed design lets the installer position the plate directly on the support arm where it meets the underside of the counter, then seat it firmly to create a solid bond at that interface. Because the plate is sized at 2 inches by 2 inches by 1/4 inch thick aluminum, the installer can anticipate how much surface area contacts the adhesive and how far the finished edge will stand proud of the arm. The clear anodized finish on the plate remains exposed after installation, so the finished look at the bracket arm is the same metallic surface that was specified.
The EH-FP22 counter support face plate is designed to work with Rakks EH-1818, EH-1824, EH-1212 and EH-1209 flush-mount counter supports, so its role is specifically tied to those bracket models in a counter support run. Each of those EH supports uses a projecting arm beneath the counter, and the plate fits over the supporting arm of the bracket, so it visually finishes that steel or aluminum arm area with a defined aluminum face. Because the plate dimensions are 2 inches by 2 inches by 1/4 inch thick, the visible footprint under the counter is predictable from one support to the next along the run. The clear anodized aluminum finish gives each support point the same surface appearance, which helps the counter installation read as a coordinated system instead of individual hardware pieces. As part of the overall Rakks EH Series counter support arrangement, this plate helps define the transition from hidden bracket to the visible portion of the support beneath the top.
The adhesive backed counter support face plate means the installer is working with a plate that bonds directly to the bracket arm, so the mounting method is consistent from one support to the next along the counter. Because the same plate is designed to work with EH-1818, EH-1824, EH-1212 and EH-1209 flush-mount counter supports, a shop or site crew can standardize on a single 2 inch by 2 inch by 1/4 inch thick plate at every EH support point, reducing variation in visible sizes. The defined 1/4 inch aluminum thickness sets an expected projection from the arm surface, which helps installers anticipate the relationship between the counter underside and the finished face plate when planning clearances. The clear anodized finish stays consistent across multiple plates, so repeated use on several brackets along a wall keeps the visible metal tones uniform. With one part number, EH-FP22, tied to these four specific EH model supports, ordering for repeat jobs that use the same Rakks EH brackets stays straightforward.
The EH-FP22 face plate is designed to work with Rakks EH-1818, EH-1824, EH-1212 and EH-1209 flush-mount counter supports, so it serves those specific bracket models.
The EH Series 2 inch counter support face plate uses an adhesive backed surface that fits over the supporting arm of the bracket, so it bonds directly to the arm during installation.
The EH-FP22 plate is described as 2 inches by 2 inches by 1/4 inch thick aluminum, so installers know the coverage area and thickness at the counter support location.
The EH Series 2 inch counter support face plate is made from aluminum with a clear anodized finish, so the visible surface is a treated metallic appearance.
The adhesive backed aluminum face plate fits over the supporting arm of the bracket, so it replaces the exposed arm surface with a uniform clear anodized aluminum face.
The EH-FP22 counter support face plate works with specified Rakks EH flush-mount counter supports to cover the supporting arm, so it provides a finished facing at each support point.
The EH Series 2 inch counter support face plate with clear anodized finish is specified for Rakks EH-1818, EH-1824, EH-1212 and EH-1209 flush-mount counter supports, so it aligns directly with those bracket models on your counter projects. Its 2 inch by 2 inch by 1/4 inch aluminum construction defines the visible footprint at each support location, while the adhesive backed mounting allows it to fit over the supporting arm without additional through-face fastening steps. Using the EH-FP22 part number for these applications keeps the face plate choice consistent across installations that rely on the Rakks EH Series.
Sold In: 1 Each
