Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EH Series counter support face plate describes this 2 inch by 3 inch aluminum plate that works with Rakks EH series flush-mount counter supports, so installers get a matched component sized for typical bracket arm coverage at the wall surface. The clear anodized finish on this face plate creates an aluminum surface suitable for exposed use, which matters when the support arm penetration needs a clean, consistent look around cabinets or counters. The plate thickness of 3/16 inch gives the face plate a solid aluminum profile, so it sits with substance over the support arm while staying low enough for typical finish build-ups around the opening. The dedicated Rakks manufacturer part number EH-FP23 identifies this exact EH series plate, which matters when ordering repeat parts for multiple supports on a run.
The adhesive backed plate design allows this EH Series counter support face plate to attach over the supporting arm of the bracket, which simplifies mounting because the plate bonds at the wall or cabinet face without secondary fastening steps. By fitting over the supporting arm of the Rakks EH series bracket, the plate aligns itself to the arm penetration, which matters when installers want consistent positioning across multiple supports with minimal layout time. The adhesive backing works at the face surface, so the installer presses the plate into place once the bracket arm is through, creating a direct workflow from bracket installation to visual finishing at the penetration area.
The EH-FP23 counter support plate is designed to work with Rakks EH-1818, EH-1824, EH-1212, and EH-1209 flush-mount counter supports, so it fits into counter runs that rely on these specific EH series brackets. Because this plate is made from aluminum with a clear anodized finish, it suits installations where the support interface sits near other metal hardware or trim, giving installers a compatible visual element at the wall or cabinet face. The 2 inch by 3 inch size lets the plate sit around the supporting arm footprint of these Rakks supports, which helps cover the local area where the arm passes through drywall or similar materials in counter, shelf, or work surface projects.
When used with EH-1818 or EH-1824 supports in deeper counter applications, the EH-FP23 plate works over the same arm interface as with EH-1212 or EH-1209 in shallower or narrower layouts, so installers can keep a uniform plate style across mixed bracket sizes. The plate thickness of 3/16 inch sets a clear edge at the face surface, which matters when installers plan finishing details, caulk lines, or adjacent trim profiles around the support penetration zone. Because this plate is specified for flush-mount counter supports, it suits layouts where the structural brackets are concealed within walls or substrates and only the supporting arms project, keeping the face detail limited to the compact aluminum plate around each arm.
The web description notes that the adhesive backed plate fits over the supporting arm of the bracket and eliminates the need to patch and fill the drywall, which directly reduces finishing steps after the structural supports are set. By covering the opening around the arm with a 2 inch by 3 inch plate, the installer avoids cutting and finishing small drywall repair pieces at each penetration, saving time and reducing the risk of cracking or irregular surfaces around the bracket arm. The clear anodized aluminum finish provides a stable surface at the penetration, which helps keep the opening edges protected from minor contact compared with exposed drywall or compound alone.
Because the EH-FP23 is tied to specific Rakks EH series models, installers can plan bracket spacing and face plate layout together, which supports repeatable results across long counter or shelf runs where every arm must align with a clean plate at the finished surface. The 3/16 inch thick plate also acts as a defined boundary for any sealant or paint edge, which can streamline final touch-up since the installer works to a consistent metal edge instead of a variable drywall patch. The dedicated manufacturer part number EH-FP23 provides a clear reference when additional face plates are required on future work, which helps maintain the same visual detail during expansions or service changes without reworking earlier penetration areas.
The EH-FP23 face plate is designed to work with Rakks EH-1818, EH-1824, EH-1212, and EH-1209 flush-mount counter supports, so it fits systems built around those specific models.
The EH Series counter support face plate uses an adhesive backed design that bonds at the face surface, allowing installers to press it over the supporting arm without separate mechanical fastening steps.
The EH-FP23 plate is described as 2 inches by 3 inches in size and 3/16 inch thick aluminum, giving it a compact footprint with a defined metal profile at the surface.
The face plate has a clear anodized aluminum finish, providing a finished metal surface around the support arm that suits exposed counter or cabinet face locations.
The EH Series counter support face plate is described as eliminating the need to patch and fill the drywall, because it covers the opening where the bracket arm passes through.
The EH-FP23 manufacturer part number identifies this specific Rakks EH Series counter support face plate, simplifying repeat ordering for matching plates across projects or future work.
The EH Series counter support face plate brings together a 2 inch by 3 inch aluminum body, 3/16 inch thickness, and clear anodized finish, giving installers a defined solution where Rakks EH brackets pass through finished surfaces. Its adhesive backed design lets the plate fit over the supporting arm of EH-1818, EH-1824, EH-1212, and EH-1209 flush-mount counter supports while eliminating the need to patch and fill the drywall at each penetration. For projects built around these Rakks supports, the EH-FP23 part from Wurth Baer Supply offers a consistent way to finish each arm location along a counter or shelf run.
Sold In: 1 Each
