Amerock Mulholland gunmetal knob gives cabinet doors and drawers a defined 1-1/2 in (38 mm) long pull point, so installers get predictable hand clearance and repeatable alignment across a run of fronts. The 13/16 in (21 mm) width keeps the footprint compact, which helps when laying out tight door reveals or narrow rails. A 1-3/16 in projection sets the hand off the face of the cabinet far enough for a solid grip while still staying close to the surface for a streamlined profile on built-ins and casework. The 3/4 in base diameter concentrates contact at the mounting point, which helps maintain a clean look around the knob on painted or stained surfaces. The knob is part of Amerock Corporations Mulholland collection, so the lines and proportions match other pieces from the same family in a project. The gunmetal finish delivers a dark, muted metallic tone that supports coordinated hardware schedules.
The Amerock Mulholland Series 1-1/2 in knob uses a single mounting point sized for a screw connection, giving installers a straightforward drill-and-mount workflow on cabinet doors and drawers. The 1-3/16 in projection defines how far the knob sits off the face, which helps when checking door swing clearances against nearby walls or adjacent cabinets. With a 13/16 in width and 3/4 in base diameter, the knob suits standard door and drawer rail widths, supporting centered or offset layouts without overwhelming narrow frames. The zinc alloy construction delivers a uniform, machined body, which supports precise positioning against layout marks. The gunmetal finish provides a consistent surface appearance, which helps maintain a uniform look across a bank of cabinets or a full room installation using this part number.
The Amerock Mulholland Series gunmetal knob is part of Amerock Corporations decorative hardware lineup in the knobs category, so it suits cabinet, furniture, and millwork applications that call for visible pulls. Its 1-1/2 in length and 1-3/16 in projection make it appropriate for typical kitchen, bath, and built-in cabinet doors where a single hand grip is standard. The 13/16 in width works well on smaller drawer fronts and narrow stiles, allowing consistent placement without pushing into panel edges. The 3/4 in base diameter defines a compact contact ring at the mounting location, which supports clean transitions on both painted MDF and solid wood face frames. As a Mulholland collection piece, it visually aligns with other Mulholland components, which helps maintain a unified hardware theme from door to drawer within the same project scope.
The defined 1-3/16 in projection of the Mulholland knob sets a repeatable standoff dimension, which simplifies layout when matching pulls across upper and lower cabinets. The zinc alloy material provides a stable, solid knob body, which helps the knob sit flush at the 3/4 in base against the cabinet surface when the mounting screw is tightened. The 1-1/2 in length gives installers a clear reference when measuring from door edges or panel lines, which supports consistent centerline placement on multiple fronts. The 13/16 in width and compact base diameter reduce visual bulk, which is useful when aligning several knobs in straight rows on a bank of drawers. The gunmetal finish delivers a single, defined color tone, which supports repeatable ordering and specification by finish name for future additions or matching replacements under the same Amerock Mulholland label.
The Amerock Mulholland Series knob is 1-1/2 in (38 mm) long, 13/16 in (21 mm) wide, with a 1-3/16 in projection and a 3/4 in base diameter, which guides layout and clearance decisions.
The 1-3/16 in projection positions the grip off the cabinet face so fingers clear the door or drawer surface, while keeping the knob close enough for a compact, unobtrusive profile.
The Amerock BP535342GM Mulholland knob is made from zinc alloy, giving the knob a solid metal construction that supports a substantial feel and stable mounting on cabinet fronts.
This Mulholland collection knob uses a gunmetal finish, providing a dark metallic appearance that coordinates with other gunmetal decorative hardware in the same space.
The 3/4 in base diameter creates a compact contact area where the knob meets the cabinet surface, which supports neat visual transitions on both painted and stained fronts.
The Mulholland collection designation indicates this knob belongs to Amerock Corporations Mulholland decorative hardware family, helping projects maintain consistent styling across multiple pieces.
The Amerock Mulholland Series gunmetal 1-1/2 in knob, part number BP535342GM, combines defined dimensions with a zinc alloy body and gunmetal finish, giving installers a repeatable hardware choice for cabinet doors and drawers. Its 1-1/2 in length, 13/16 in width, 1-3/16 in projection, and 3/4 in base diameter offer clear layout references across kitchen, bath, and built-in projects. For work that calls for Amerock decorative hardware in a consistent Mulholland style and finish, this knob delivers a precise, spec-ready option for cabinet fronts.
Sold In: 1 Each
