Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Mulholland appliance pull in black bronze gives a 12 inch center-to-center grip that spans wider doors and panels cleanly, so large appliances and tall cabinet fronts read as one continuous, controlled line across the run. The 13-3/16 inch overall length extends just enough past the mounting holes to balance scale on overlay doors, which helps keep the hardware visually in proportion on taller faces. Zinc construction creates a solid-feeling pull point with consistent material density, which supports repeatable drilling and mounting when you are laying out multiple doors. The 1-1/4 inch width carries the Mulholland series profile across the hand contact area, so fingers land on a defined edge instead of a thin strip. Black bronze finish gives a dark, understated surface that works with both traditional and more modern door styles where a low-reflective pull is preferred.
The 12 inch (305 mm) center-to-center measurement on this Mulholland pull defines the exact distance between mounting points, so drilling jigs and shop templates can be set once and reused across all matching doors and panels. With a 13-3/16 inch overall length, there is a known 5/8 inch spread from each mounting hole to the end of the pull, allowing you to align the ends with stiles or panel edges while still holding the screw pattern where you want it. A projection of 1-15/16 inch puts the gripping bar out from the door enough to clear typical panel profiles, which supports hand access even on thicker appliance panels. The 1-1/4 inch square bases at both ends define a compact, consistent footprint, so you can read your margins to door edges and rail lines more accurately during layout.
Amerock Mulholland appliance pull with 12 inch center-to-center spacing fits projects where larger doors and appliance panels call for a longer, consistent grip line rather than multiple smaller pulls. In a kitchen run, the 13-3/16 inch overall length pairs well with tall pantry doors, giving a single hardware element that matches the door height visually instead of getting lost on a wide face. On integrated appliances, the 12 inch spread coordinates with panel layouts that echo cabinet lines, keeping the hardware grid consistent from door to door. The 1-15/16 inch projection adds enough stand-off to work on thicker overlay fronts, so the handle is reachable even when doors sit proud of the face frame. Black bronze finish supports designs that need a darker accent against painted or stained wood, allowing the pull to register clearly without dominating the elevation.
The precise 12 inch (305 mm) center-to-center dimension on the BP53532BBR pull allows installers to standardize drilling patterns, which speeds production when you are boring multiple tall doors or appliance panels with the same layout. Because the overall length is a fixed 13-3/16 inch, you can quickly calculate end clearances to door edges or stile lines, improving symmetry across paired doors or flanking panels. The 1-1/4 inch by 1-1/4 inch base size at each mounting point defines a reliable contact patch against the panel, which helps the pull seat uniformly when you snug it down. Zinc construction supports cleanly formed threads and mounting interfaces within the pull body, which contributes to a secure connection around the screw locations. The 1-1/4 inch handle width, combined with the nearly 2 inch projection, gives hands a consistent bar to grab, which is especially useful on heavy, fully loaded tall storage where a narrow pull would feel less controlled.
The Amerock Mulholland appliance pull has a 12 inch (305 mm) center-to-center dimension, which sets the exact spacing between mounting holes for drilling and layout.
The BP53532BBR Mulholland pull measures 13-3/16 inch (335 mm) overall, so it extends slightly past the 12 inch mounting spread for better scale on larger doors.
The Mulholland black bronze appliance pull has a 1-15/16 inch (49 mm) projection, holding the grip away from the door face for finger clearance on thicker panels.
The Amerock Mulholland BP53532BBR appliance pull is made from zinc, giving a consistent base material for the profile and mounting interfaces.
Each base on the BP53532BBR appliance pull is 1-1/4 inch (32 mm) long and 1-1/4 inch (32 mm) wide, providing a square footprint at each mounting point.
The Mulholland appliance pull has a 1-1/4 inch (32 mm) width, giving a broad gripping surface across the handle for a solid handhold on larger doors.
Amerock Mulholland appliance pull in black bronze with 12 inch center-to-center spacing offers defined dimensions that translate directly into faster layout and consistent results on tall doors and appliance panels. The 13-3/16 inch overall length, 1-15/16 inch projection, and 1-1/4 inch width combine to give a comfortable, repeatable grip point across multiple fronts. With zinc construction carrying the Mulholland profile and black bronze finish, this BP53532BBR pull aligns design and measurement for projects that rely on a unified hardware line. Put this size and configuration to work wherever your layout calls for a longer, measured pull on a larger face.
Sold In: 1 Each
