Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Mulholland appliance pull gives you an 18 inch center to center grip that spans wide appliance doors or tall cabinet panels, so you get a handle sized to match larger fronts instead of a small cabinet pull that can look undersized in this application. The 19-1/4 inch overall length balances that screw spacing with extra handle at each end, helping the pull visually anchor long door runs on built-in refrigerators or pantry doors. A projection of 2 inches creates consistent hand clearance off the face of the door, which supports a comfortable, full-hand grasp on heavy doors. The 1-5/16 inch width and matching base dimensions spread the pull load over a broader area on the panel, which matters when you are working with substantial appliance fronts. The Mulholland collection design keeps the lines clean and understated, fitting into a wide range of kitchen styles without drawing away from the cabinet layout.
This Amerock 18 inch center to center pull sets the mounting holes at exactly 18 inches apart, which lets you pre-drill appliance panels or cabinet doors with confidence when repeating the same handle across multiple openings. The square 1-5/16 inch by 1-5/16 inch base on each end defines a clear bearing area on the door surface, which helps during layout because you can align those bases to stile edges or panel reveals. A projection of 2 inches off the face keeps the gripping area forward of applied door trim, allowing the handle to clear raised profiles. At 19-1/4 inches overall length, the pull stretches beyond the screw locations, so you can use that extra length to align with design features like rail heights or appliance trim lines.
This Amerock Mulholland satin nickel appliance pull is part of the Mulholland collection, so it visually coordinates with other Mulholland pieces when you are carrying a single style across both standard cabinet doors and appliance fronts. The 18 inch center-to-center size suits tall pantry doors, integrated refrigerator doors, or other situations where a longer handle matches the scale of the panel, rather than leaving a short pull floating in the middle of a large surface. Because the width, base length, and base width are all 1-5/16 inch, the ends present a stable footprint against the face of wider stiles or door rails, which is useful on oversized fronts. The satin nickel finish works alongside other satin nickel decorative hardware in the same space, tying your handles, knobs, and hinges into one consistent finish story throughout the kitchen or workspace.
The clearly specified 18 inch (457 mm) center-to-center dimension on the BP53533G10 appliance pull lets you transfer measurements straight from the spec to your drilling templates, which speeds up repeat installations on a bank of tall doors or multiple appliance panels. Knowing the 19-1/4 inch (489 mm) overall length ahead of time helps you position the pull so that the handle ends align with design features like top rails or mid-rails without guesswork. The 2 inch (51 mm) projection number gives you a fixed stand-off from the door face, so you can factor that distance into clearances near adjacent cabinetry or wall panels. With a 1-5/16 inch square base at each end, you know exactly how much flat area you need for the feet of the pull, which is useful when working near edge profiles or narrow stiles. The zinc die-cast construction and satin nickel finish together define both the structural body and the visual surface, so you are specifying a pull with known material and finish characteristics rather than an unspecified metal.
The Amerock Mulholland appliance pull has an 18 inch (457 mm) center-to-center measurement, setting the mounting hole spacing used when drilling cabinet or appliance doors.
The BP53533G10 pull measures 19-1/4 inches (489 mm) overall, so the handle extends slightly past the mounting holes for a balanced look on tall or wide doors.
This satin nickel appliance pull projects 2 inches (51 mm) from the door surface, creating hand clearance for a firm grip on heavier doors or appliance panels.
The Mulholland appliance pull is zinc die-cast, giving the handle a solid cast metal body that feels substantial during repeated daily use.
Each end of the pull has a base length of 1-5/16 inches and a base width of 1-5/16 inches, defining a square contact area on the door surface.
This Amerock Mulholland pull uses a satin nickel finish, aligning with other satin nickel decorative hardware for a coordinated project look.
The Amerock Mulholland appliance pull in satin nickel gives you a defined 18 inch center-to-center layout, a 19-1/4 inch overall length, and a 2 inch projection, so you can match handle size to appliance-scale doors. With its zinc die-cast construction, 1-5/16 inch square bases, and coordinated Mulholland styling, this pull fits kitchen, pantry, and utility installations where larger fronts demand a longer grip. Use these verified dimensions and material details to align your drilling patterns, visual layout, and hardware finish choices on the next cabinet or appliance project.
Sold In: 1 Each
