Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Mulholland appliance pull is a zinc die-cast handle designed for appliance-scale fronts that call for an 8 inch (203 mm) center-to-center layout. That dimension aligns the handle with standard appliance-style drilling, which keeps high-use doors and panels visually consistent. The pull measures 9-3/16 inches (233 mm) overall length, so it spans wider faces comfortably and gives hands plenty of grip in busy kitchen zones. A 1-13/16 inch (30 mm) projection sets the handle off the surface at a practical distance, leaving room for a firm grasp without fingers crowding the panel. The 1-3/16 inch (30 mm) width and matching base dimensions distribute load at each mounting point, which supports a solid feel on heavier appliance fronts. Finished in gilded bronze from Amerockâ??s Mulholland collection, this pull provides a coordinated option when matching decorative hardware across the project.
This Amerock BP53531GB pull uses an 8 inch (203 mm) center-to-center spacing, which sets hole locations for appliance doors and large cabinet faces that follow that standard. The 9-3/16 inch (233 mm) overall length means the bar extends modestly past the mounting points, which keeps the ends clear of panel edges when centered on wide faces. With a projection of 1-13/16 inches (30 mm), the handle stands off the surface at a distance that balances knuckle clearance with a compact profile along the run. Matching base length and width at 1-3/16 inches (30 mm) provide square-footed contact at each mounting location, which helps the pull seat evenly against flat door or drawer fronts. These fixed dimensions give installers predictable reference points when aligning multiple Mulholland appliance pulls in a kitchen or similar workspace.
This Mulholland collection pull is part of Amerockâ??s decorative hardware line, which positions it for use on appliance fronts and cabinet doors that benefit from an appliance-style handle. The 8 inch (203 mm) center-to-center measurement suits large refrigerators, panel-ready appliances, and over-scale pantry or utility doors that follow appliance spacing. Its 9-3/16 inch (233 mm) length lets the handle sit proportionally on wider faces, which is helpful when aligning with other Mulholland pieces in the same area. The gilded bronze finish aligns with the Mulholland collectionâ??s style, which supports projects where decorative hardware and appliance pulls share a unified look. Because it falls under the appliance pulls product class, it is suited to installations where a standard cabinet pull would be undersized for the scale and load of the door.
The zinc die-cast construction of this Amerock Mulholland appliance pull provides a solid, molded body, which gives a firm feel when opening heavier doors tied into appliance hardware. An 8 inch (203 mm) center-to-center distance sets a clear drilling pattern, which helps installers repeat the same layout across multiple doors without recalculating spacing. The 1-13/16 inch (30 mm) projection and 1-3/16 inch (30 mm) width work together to create a comfortable gripping section, which supports smooth operation on tall panels where users pull from different angles. Matching base dimensions at each end help the pull register cleanly against flat surfaces, which simplifies aligning the handle square to door edges during mounting. As part of Amerockâ??s Mulholland collection, this gilded bronze appliance pull aligns visually with other pieces in the line, which simplifies hardware selection when planning out coordinated runs from a single source.
The Amerock Mulholland appliance pull uses an 8 inch (203 mm) center-to-center size, which sets the hole spacing for mounting on appliance fronts or large cabinet doors that follow that layout.
The BP53531GB Mulholland gilded bronze pull measures 9-3/16 inches (233 mm) overall length, which gives extra gripping area on wide or tall doors beyond the 8 inch mounting spread.
This Amerock Mulholland appliance pull is made from zinc die-cast material, which provides a solid, molded body suitable for frequent opening of appliance-scale doors and panels.
The Mulholland collection appliance pull has a 1-13/16 inch (30 mm) projection, which sets the handle off the surface to give hand and knuckle clearance during operation.
The Amerock Mulholland BP53531GB pull has a 1-3/16 inch (30 mm) width, with base length and width also at 1-3/16 inches, which spreads contact at each mounting point.
This Amerock appliance pull belongs to the Mulholland collection and has a gilded bronze finish, which supports coordinated decorative hardware across the project.
The Amerock Mulholland appliance pull BP53531GB brings an 8 inch (203 mm) center-to-center layout, 9-3/16 inch (233 mm) overall length, and gilded bronze Mulholland collection styling together for appliance-class fronts. For projects where zinc die-cast construction, defined projection, and matched decorative hardware matter, this pull provides a consistent option for aligning appliance doors and large cabinet faces within the same design line.
Sold In: 1 Each
