Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 x 18 heavy duty workstation bracket describes a Pro Value Series support bracket designed to hold work surfaces where a strong wall-mounted support is required, so installers can create stable workstations and counters in demanding environments. The bracket is classified as a workstation and countertop bracket, which means it is built for workbenches, workstations, garage storage, ADA stations, and computer stations, giving flexibility across different project types. A 1,000 lb per pair load rating allows the bracket pair to support substantial static loads when properly fastened into appropriate structures, which matters for heavy worktops or dense storage. The bracket is made from 1/8 inch steel, providing a solid steel section that resists flex under typical workstation loads. A white finish gives a clean, neutral appearance, which matches common shop, office, and residential storage color schemes where visible hardware needs to look consistent.
This workstation and countertop bracket uses multiple mounting 1/4 inch hole locations, giving several points to fasten into wall framing or other structural backing so the 1,000 lb per pair rating can be utilized in real installations. The 18 x 18 geometry defines the arm and vertical leg length, which sets consistent projection and vertical support for workbenches and counters. The reversible design means the same bracket can be oriented as needed for the installation, which simplifies layout when obstacles or existing framing dictate bracket placement. For larger size versions, a 3 x 3 at 45 degree notch allows wall cleat and wire run clearance, which is useful when routing services behind or beneath work surfaces.
This Pro Value Series bracket is designated for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it suits both shop environments and task-focused stations where a secure wall-mounted surface is needed. As a workstation and countertop bracket, it is intended to carry work surfaces or counters, allowing installers to build overhead-free support so legroom and floor space remain open under the top. The 18 x 18 size provides generous horizontal reach and vertical bearing, which supports deeper tops commonly found in benches and computer workstations. The white finish helps the hardware visually recede beneath light-colored tops in office, healthcare, or residential garage spaces, which can be important when brackets are directly visible.
The load rating at 1,000 lb per pair means a properly anchored set of brackets can support heavy static loads, so dense tools, equipment, or storage bins can be placed along the surface without overtaxing the support members. The bracket is constructed from 1/8 inch steel, which supplies the solid section needed to translate that rating into practical stiffness under load. Multiple mounting 1/4 inch hole locations in the bracket give options to align fasteners with studs, wall cleats, or other backing, helping the installer match bracket positioning to structural members instead of being locked into one hole pattern. Packaged in equal quantities of rights and lefts, the bracket set ensures mirrored supports so both sides of a workstation or counter share identical geometry, which helps keep tops level and visually balanced along the run.
The reversible design described for this bracket allows the installer to flip the bracket orientation to suit different layouts, which is useful when obstructions such as conduits, existing blocking, or trim require changing the way the arm and vertical leg sit on the wall. That reversibility turns a single part into a more flexible support solution for varied workstation, garage, or ADA station configurations. Multiple mounting 1/4 inch hole locations along the bracket provide a series of fastening options, so fasteners can be located over studs, wall cleats, or other structural members that carry the 1,000 lb per pair load into the wall.
For the six larger sizes in this bracket family, a 3 x 3 at 45 degree notch allows wall cleat and wire run clearance, which means cleats, low-voltage cabling, or other runs can pass behind or through the notch without interfering with the support arm. This notch detail helps maintain continuous cleats or wire chases while still placing brackets where they best support the work surface. Stainless steel brackets in the broader offering use genuine 304 series stainless steel with a natural brushed finish and 12 gauge non-magnetic construction, providing an alternative material choice when a project calls for stainless support members in similar applications.
This workstation and countertop bracket is rated at 1,000 lb per pair, which allows it to support heavy static loads on worktops when properly fastened into suitable structural backing.
This Pro Value Series bracket is made from 1/8 inch steel with a white finish, giving a rigid steel support with a neutral appearance suitable for many workstation and storage layouts.
The bracket is specified for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it fits both shop and task-station applications.
The reversible design allows the bracket to be oriented in different ways, which helps adapt to wall conditions, obstacles, or layout choices without needing a different bracket model.
The multiple mounting 1/4 inch hole locations give several fastening points, letting installers place fasteners where structural framing or cleats exist for secure support.
On the six larger sizes in this family, the 3 x 3 at 45 degree notch allows wall cleat and wire run clearance, helping services pass while still positioning brackets effectively.
This 18 x 18 heavy duty workstation bracket from the Pro Value Series pairs a 1,000 lb per pair rating with 1/8 inch steel construction and a white finish, giving installers a strong, neutral support option for workbenches, workstations, garage storage, ADA stations, and computer stations. The reversible design, multiple mounting 1/4 inch hole locations, and availability within a family that offers a 3 x 3 at 45 degree notch on six larger sizes let you align bracket orientation and hole placement with real wall conditions and service runs while maintaining consistent support geometry across the project.
Sold In: 1 Pair
