Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch concealed bracket is a 1/4 inch steel support from the Pro Value Series that carries workstation, shelving, or countertop loads while staying out of sight, so the installation stays visually clean while still using substantial steel support.
The white finish on this concealed bracket matches white surfaces, so the support visually blends into painted shelves or light countertops while still delivering the same structural role as darker finishes in the same series.
The bracket is part of the Workstation and Countertop Brackets product class, so it is designed to handle substantial surface loads in shop, garage, or work areas where strong fixed support is needed along a wall or similar structure.
With a load limit over 1,000 lb per pair, this concealed bracket setup is suited for heavy-duty applications where significant weight will rest on the supported surface and the installer wants the bracing hidden rather than exposed underneath.
All welds are located on the reverse, so the visible face stays clean and smooth once mounted, which helps when a neat finished look is important along a wall run or under a visible work surface in high-traffic areas.
This concealed bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers as its mounting fasteners, so the bracket is drawn tightly against the supporting structure while the bolt heads bear into the bracket slots or holes.
The upper extension above the support arm provides extra vertical engagement against the wall or backing, so the installed bracket gains additional resistance to rotation when loads are placed near the outer edge of the supported surface.
Because all welds are located on the reverse, the side facing the room remains smooth after installation, so the final appearance under a shelf or counter stays clean without grinding or finishing passes to dress exposed welds.
The 24 inch length aligns with deeper shelves, counters, or work surfaces, so the support arm runs well into the span to carry loads that extend away from the wall or structure.
This 24 inch concealed bracket from the Pro Value Series is categorized under Workstation and Countertop Brackets, so it is intended for fixed work surfaces, counters, or shelving where strong wall-mounted support is required.
The white finish fits projects using white shelving, cabinets, or tops, so installers can maintain a consistent color scheme along support points while still relying on the same structural design used across the Pro Value Series brackets.
With 1/4 inch steel construction, the bracket body supplies substantial stiffness along its length, so deeper tops or shelves benefit from a rigid support that helps limit sag when weight is applied during everyday use.
The load limit over 1,000 lb per pair places this bracket in a heavy-duty category, so it is suited for surfaces that will see concentrated loads such as equipment, tools, or stacked materials while remaining within its rated capacity.
The upper extension above the support arm raises the vertical contact area along the wall, so loads that pull outward on the arm translate into a more favorable force path into the supporting structure.
Having all welds on the reverse side means the visible edges under a counter or shelf stay smooth, so finished installations can be left exposed without additional cosmetic work.
The use of 3/8 inch by 4 inch carriage bolts, combined with hex nuts and flat washers, standardizes the fastening method, so installers can rely on a consistent through-bolt connection that tightens the bracket firmly against wood or similar framing.
The flat washers spread clamp force from the hex nuts over a larger surface, so the mounting points are less prone to crushing into the supporting material when the bolts are torqued down for a solid fit.
The carriage bolts provide a square-shoulder interface under the head, so once pulled into the bracket hole or slot they resist spinning, which helps when tightening nuts from the opposite side in tight or awkward spaces.
The upper extension above the support arm increases the moment arm at the wall connection, so the bracket better manages bending forces from heavy loads without relying solely on the lower arm-to-wall intersection.
Because all welds are located on the reverse, the face that sits outward can be aligned visually in a straight line, so installers can maintain a consistent look when setting multiple brackets along a run.
The 24 inch arm length provides a clear dimension for layout, so repeating bracket positions along longer counters or shelves remains straightforward when spacing and edge setbacks are planned.
The 24 inch concealed bracket uses 1/4 inch steel, which provides a thick, rigid structure that supports substantial loads without excessive flexing in typical workstation or countertop installations.
The concealed bracket has a load limit over 1,000 lb per pair, allowing it to support heavy countertops, shelves, or work surfaces when installed within its rated capacity.
The bracket has a white finish, which helps it blend with white shelves, cabinets, or countertops so support points are less noticeable in finished installations.
The bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers, creating a through-bolt connection that clamps the bracket against the supporting structure.
The upper extension above the support arm increases vertical engagement at the wall, helping the bracket resist rotation and bending from loads at the outer edge of the surface.
All welds on the reverse keep the visible face smooth, so installed brackets present a clean, finished look under shelves or counters without exposed weld beads.
The 24 inch concealed bracket in white from the Pro Value Series combines 1/4 inch steel construction, a load limit over 1,000 lb per pair, and reverse-side welds, so it supports demanding workstation or countertop applications while maintaining a discreet, clean appearance.
With its white finish, upper extension above the support arm, and standardized 3/8 inch by 4 inch carriage bolt mounting, this workstation and countertop bracket helps deliver repeatable, strong, and visually tidy support across shelving, counters, and work surfaces.
Sold In: 2 Each
