Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
15 inch concealed bracket white is a 1/4 inch steel support from the Pro Value Series that is built as a workstation and countertop bracket, so it is suited for counter, shelf, or bench runs needing strong concealed support. The bracket is part of the Workstation and Countertop Brackets product class, which positions it for applications where a counter surface must stay clear underneath for legroom or storage. The white finish ties into closet, garage, or light-colored countertop layouts, so the support can disappear visually under tops or along walls. This concealed bracket uses steel construction, which gives a rigid base when tying countertops or shelves back to framing. The design is sold by Wurth Baer Supply, connecting it to a supplier focused on the woodworking trade.
This concealed bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers, giving a through-bolt style connection that ties the bracket firmly into the supporting structure. The 3/8 inch diameter hardware offers a broad bearing surface in the bracket holes compared to smaller fasteners, which supports the stated load limit when bolted into suitable backing. The 4 inch bolt length gives reach through typical build-ups, so the installer can draw the bracket tight to framing or substructure. Hex nuts paired with flat washers spread clamping force over more area on the back side, which helps keep the bracket snug and reduces the chance of localized crushing where it bears on the structure.
This 15 inch concealed bracket operates within the Shelf, Closet and Garage Organization and Shelving and Accessories category, so it fits naturally under closet shelves, garage work surfaces, and utility countertops where an open underside is valuable. As a workstation and countertop bracket, it can support counters that carry heavy equipment, because the load limit over 1,000 lb per pair supports substantial concentrated or distributed loads when installed in pairs. The white finish lets the bracket blend into light-colored shelving or painted walls, keeping the visual focus on the finished surface rather than the support. Because the load rating is defined per pair, installers can plan bracket spacing and quantity using that figure when laying out long runs of shelving or continuous countertops that need strong concealed support.
The Pro Value Series identity and manufacturer part number 72531 82 180 give a consistent reference for repeat ordering, which helps shops standardize on one concealed bracket across projects and reduces layout guesswork from job to job. The 1/4 inch steel thickness is stable across the line, allowing fabricators to base notch depths or counter underside clearances on a known section size. Upper extension above the support arm adding superior strength means that once a layout is proven on one installation, the same spacing and mounting detail can be carried to similar work without redesign. All welds on the reverse side create a flat face against the room side of the bracket, simplifying alignment against straight edges or templates when marking hole positions. Because the bracket belongs to the workstation and countertop bracket class with a load limit over 1,000 lb per pair, installers can confidently reuse the same model in repeat counter builds where similar structural performance is required.
The 15 inch concealed bracket works within the Shelf, Closet and Garage Organization and Workstation and Countertop Brackets classes, so it suits shelves, closets, garages, and countertop or workstation runs.
The Pro Value Series concealed bracket has a load limit over 1,000 lb per pair, allowing it to support heavy countertop, workbench, or shelving loads when used in properly spaced pairs.
The concealed bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers, creating a through-bolt connection that firmly ties the bracket into structural backing.
The bracket uses 1/4 inch steel, which provides a thick, rigid arm that resists bending under load and keeps countertops or shelves feeling solid during everyday use.
The upper extension above the support arm increases vertical bearing area on the wall, which improves strength and transfers load more effectively into the supporting structure.
All welds on the reverse side keep the visible face clean and smooth, which improves appearance under counters and simplifies finishing in exposed installations.
The 15 inch concealed bracket white from the Pro Value Series combines 1/4 inch steel construction with an upper extension and a load limit over 1,000 lb per pair, making it suited to demanding workstation and countertop layouts. Its use of 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers gives a solid fastening method into structural backing. With welds kept on the reverse side, it delivers a clean visible face for closet, garage, and countertop projects that rely on concealed support. For projects that need strong, hidden support along walls, this concealed bracket provides a defined, heavy-duty option.
Sold In: 2 Each
