Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
8 x 12 heavy duty workstation bracket describes this Pro Value Series steel bracket that supports workstations, countertops, and shelving where a strong wall-mounted support is required. The bracket uses 1/8 inch steel, so it carries substantial loads without flexing in normal workstation and storage setups. Its 8 inch by 12 inch geometry fits typical countertop and bench depths, which helps align support arms under work surfaces in shops, garages, and commercial areas. The load rating at 1,000 lb per pair means a correctly installed pair handles heavy worktops or dense stored items without overloading the bracket itself. The almond finish gives a neutral, light-colored appearance that coordinates with many workstations and storage systems, which matters when brackets are exposed in finished areas or offices. As part of the Workstation and Countertop Brackets class, it is built for fixed, wall-supported surfaces that stay stable under repeated use.
This workstation and countertop bracket uses multiple mounting 1/4 inch hole locations along the steel body, which creates several screw or bolt points for securing to wall and underside framing. That layout helps align fasteners with existing studs or substrate patterns while keeping the bracket seated flat against the mounting surface. The reversible design means each unit can act as either a right or left support, so you can flip orientation to clear obstructions or coordinate with wall cleats and wiring. The 8 x 12 size allows the vertical leg to bear against the wall while the horizontal leg projects under typical tops or shelves, which keeps the support arm positioned where loads occur in workbenches, garage storage runs, ADA stations, and computer stations.
This Pro Value Series workstation bracket is intended for workbenches, workstations, garage storage, ADA stations, and computer stations, so it suits projects where fixed, wall-mounted surfaces need strong under-support. The 8 x 12 dimensions match many countertop and bench depths, which helps position the horizontal leg directly under the work edge instead of too short or too long into the aisle. In garage storage or shop layouts, the 1,000 lb per pair load rating supports dense tools, parts, or materials stacked on shelves or benchtops, so heavy loads stay supported by the bracket structure. In ADA stations and computer stations, the slim steel profile of 1/8 inch material keeps support arms relatively compact while still carrying rated loads, which matters where knee clearance or seated access is part of the design.
The multiple mounting 1/4 inch hole locations across the bracket give several fastening options vertically and horizontally, which allows consistent bolt or screw placement across a run of brackets even when underlying framing varies slightly. That repeatable pattern simplifies layout when installing long workstations or continuous shelving because each bracket can use similar hole positions relative to the top edge. The reversible design makes brackets versatile and easy to use, since the same piece can act as a right or left without special versions, which reduces sorting and setup time during installation. Packaged in equal quantities of rights and lefts keeps the overall set balanced for symmetrical layouts with matched supports on both sides of each span. The 8 x 12 configuration within the Workstation and Countertop Brackets class ties into standard work surface geometries, so once you establish spacing and hole use for one installation, that approach can be repeated across more stations with predictable fit and support behavior.
The 8 x 12 heavy duty workstation bracket has a load rating at 1,000 lb per pair, allowing it to support heavy countertops or storage loads when used as a paired support.
The reversible design lets each bracket function as either a right or left, so orientation can be flipped to match layout needs without changing part numbers.
The workstation bracket is made from 1/8 inch steel, providing a rigid support arm that resists bending under typical workstation and storage loads.
The bracket is for workbenches, workstations, garage storage, ADA stations, and computer stations, covering many fixed-surface projects in shops and facilities.
The multiple mounting 1/4 inch hole locations offer several fastening points, helping align fasteners with studs or framing while keeping a consistent bracket layout.
The almond finish gives a neutral, light-colored appearance, helping the bracket blend with many wall and cabinet colors in finished areas.
This 8 x 12 heavy duty workstation bracket with almond finish from the Pro Value Series combines a 1,000 lb per pair load rating, 1/8 inch steel construction, and multiple mounting 1/4 inch hole locations. Those details suit workbenches, workstations, garage storage, ADA stations, and computer stations where strong, wall-mounted support is needed. When a project calls for a workstation and countertop bracket that aligns with common top depths and provides reversible use, this bracket offers a practical, consistent support choice.
Sold In: 5 Pair
