24" x 29" Heavy Duty Workstation Bracket, Almond Finish (3 Pair)

24 x 29 Heavy Duty Workstation Bracket Use Cases

24 x 29 heavy duty workstation bracket describes a Pro Value Series steel support that carries a 1,000 lb load rating per pair, so it handles substantial work surfaces where strong support is needed. The 24 inch by 29 inch sizing defines the bracket geometry, giving a deep horizontal projection and vertical leg suited to workbenches, workstations, and similar surfaces. The bracket is made from 1/8 inch steel, which provides a solid structural section for demanding woodworking and garage projects. An Almond finish on the bracket offers a neutral, light-colored appearance that blends with many workstations and storage layouts. The bracket is classified as a workstation and countertop bracket, so it is intended to support tops in workbenches, garage storage, ADA stations, computer stations, and other task areas. The reversible design lets the installer orient each bracket as needed for the layout.

Key Workstation Bracket Details For Real Jobs

• The 1,000 lb per pair load rating lets the bracket support heavy work surfaces, which matters when building workbenches or stations that must hold tools, materials, or equipment without overstressing the supports.
• The 1/8 inch steel construction gives the bracket a substantial section thickness, helping it resist bending under design loads so tops stay flatter in service.
• The Almond finish provides a light, neutral color that coordinates with many shelving, workstation, and cabinet schemes, helping projects maintain a consistent visual look.
• Multiple mounting 1/4 inch hole locations offer various fastening points, which helps installers align the bracket to studs, cleats, or tops without re-drilling steel.
• The reversible design allows either orientation in use, so installers can adapt bracket placement to obstructions or layout details while keeping the same part.
• The 3 inch by 3 inch 45 degree notch on the six larger sizes creates clearance for wall cleats and wire runs, helping routing and support details share space at the wall line.

Workstation Bracket Mounting And Layout Details

This Pro Value Series 24 inch x 29 inch workstation bracket uses multiple mounting 1/4 inch hole locations, giving several choices for where to fasten into the wall structure or supporting members. These pre-placed 1/4 inch holes reduce layout time when aligning with existing framing, cleats, or other mounting surfaces. The bracket load rating of 1,000 lb per pair means the mounting pattern must be used in pairs, keeping loading consistent with the rating intent. The reversible bracket design means the same part can be turned to best fit the wall and top relationship, which simplifies layout when conditions vary along a run. On the six larger sizes, the 3 inch by 3 inch 45 degree notch provides a dedicated space for wall cleats and wire runs at the corner.

Why This Workstation Bracket Fits Demanding Stations

Where The 24 x 29 Bracket Performs Best

This 24 inch x 29 inch heavy duty workstation bracket is identified for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it suits a wide range of fixed work-surface builds. The workstation and countertop bracket classification ties it directly to supporting horizontal tops, which is important when planning continuous counters or individual work areas. Its 1,000 lb per pair load rating supports applications where tools, components, or equipment add significant weight over time. In garage storage layouts, the combination of 24 inch projection and 29 inch leg length allows deeper tops that can hold bins or tools. In ADA stations and computer stations, the Almond finish and clean steel profile support a more finished look while still carrying rated loads.

Details That Support Repeatable Mounting Results

The multiple mounting 1/4 inch hole locations on this Pro Value Series workstation bracket provide repeated spacing options along both the vertical and horizontal members, which helps installers position fasteners consistently across multiple brackets. The reversible design means both left and right orientations use the same geometry, aiding alignment when brackets are arranged along a run of workbench or countertop. The 3 inch by 3 inch 45 degree notch on the six larger sizes creates a defined path for wall cleats and wire runs, which improves coordination between structural support and electrical or data routing. The 1/8 inch steel material gives each bracket a robust profile that behaves predictably under load, helping maintain top alignment across several brackets. The Almond finish offers a consistent appearance from bracket to bracket, which matters when visible supports run along exposed work areas.

Common Questions About This Workstation Bracket

Selecting This Bracket For Work Surfaces

The Pro Value Series 24 inch x 29 inch heavy duty workstation bracket with Almond finish combines a 1,000 lb per pair load rating, 1/8 inch steel construction, and multiple mounting 1/4 inch hole locations, so it suits demanding workbench, workstation, garage storage, ADA station, and computer station builds. The workstation and countertop bracket classification and reversible design support consistent layouts using the same part across a project. For projects that need steel supports sized for substantial tops in these applications, this bracket offers a clearly defined load rating and geometry for planning.