Shelf and Countertop Supports Rigid, Heavy Duty - Pro Value Series 72531 76 110

Workstation Bracket 18x18 Primed For Heavy Loads

Workstation bracket 18x18 primed delivers rigid, heavy duty support for workbenches, workstations, garage storage, ADA stations, and computer stations, so one bracket style can serve multiple build types across a shop or job site. The Pro Value Series workstation and countertop bracket design is specifically rated at 1,000 lb per pair, which lets installers confidently plan deeper counters or heavier benchtops without changing bracket families. The bracket is made from 1/8 inch steel, providing a solid structural section that resists flex under load for stable tops and shelving. A reversible design makes the bracket versatile and easy to use, so orientation can follow framing or layout rather than forcing changes. This 18x18 bracket is primed, giving a prepared surface for finishing processes to match surrounding casework or environment as needed.

Key Workstation Bracket Details That Matter On Site

• The load rating at 1,000 lb per pair supports substantial workbench, workstation, or storage loads, which helps installers design spans and support spacing that hold up in service.
• The 1/8 inch steel construction adds stiffness and strength, which helps minimize movement under heavy tools or stored materials along a shelf or countertop run.
• Multiple mounting 1/4 inch hole locations give several fastening points into wall and top structures, which supports flexible placement along studs or rails without re-drilling metal.
• The reversible design makes brackets versatile and easy to use, which can speed installation when framing varies, since either orientation delivers the same support geometry.
• Packaged in equal quantities of rights and lefts provides matched opposing pairs, which simplifies laying out symmetrical workstations, counters, or benches along a wall.
• The six larger sizes have a 3 inch by 3 inch 45 degree notch that allows wall cleat and wire run clearance, which helps routing services behind tops without interference from the bracket heel.

Mounting, Hole Layout, And Fit For This Bracket

This Pro Value Series workstation and countertop bracket uses multiple mounting 1/4 inch hole locations, giving several options to fasten into structure and into tops within the same bracket footprint. The distributed pattern lets installers pick the best holes that align with studs, wall cleats, or rails while still tying the horizontal leg securely to the work surface. The 18x18 geometry fits workstation and countertop applications described for workbenches, garage storage, ADA stations, and computer stations, so a single format can repeat across these areas. On larger sizes in this series, the 3 inch by 3 inch 45 degree notch provides clearance for a wall cleat or wire runs, helping keep power or data lines behind tops more accessible.

Using This Heavy Duty Bracket In Real Projects

Where This 18x18 Workstation Bracket Performs Best

The Pro Value Series workstation and countertop bracket is described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it fits a wide range of shop and commercial layouts. In workbenches and workstations, the 1,000 lb per pair load rating supports heavy tools or equipment across the span, which lets designers rely on fewer bracket pairs than lighter-duty hardware would allow. In garage storage or computer station applications, the rigid 1/8 inch steel section helps keep long shelves or tops from sagging, preserving alignment with adjacent cabinets or support points. Across ADA stations, the predictable bracket geometry helps maintain consistent heights and clearances when used within the stated rating and configuration.

Details That Support Repeatable Layouts And Results

Multiple mounting 1/4 inch hole locations along the bracket legs support repeatable layouts because the same bracket can bolt to studs, cleats, or rails in varying patterns while still landing fasteners where needed in the top. This flexibility helps reduce layout adjustments when field conditions shift. The reversible design makes brackets versatile and easy to use, so an installer can flip the part to work around obstructions while preserving the same working dimensions. Packaged in equal quantities of rights and lefts gives a predictable supply of mirrored parts, which helps lay out opposing brackets under a counter or bench for consistent support spacing. The noted 3 inch by 3 inch 45 degree notch on the six larger sizes in this series creates a dedicated path for wall cleats and wire runs, which supports cleaner routing of services without cutting into the steel bracket.

Common Questions About This Workstation Bracket Series

Select This 18x18 Bracket For Demanding Stations

The workstation bracket 18x18 primed from the Pro Value Series combines a 1,000 lb per pair load rating with 1/8 inch steel construction, so it suits heavy duty workbenches, workstations, garage storage, ADA stations, and computer stations. Multiple mounting 1/4 inch hole locations and a reversible layout support flexible field installation, while the primed finish prepares the surface for finishing steps that align with surrounding casework. For projects needing rigid workstation and countertop brackets in a consistent 18x18 format, this model offers defined performance and mounting features.