Shelf and Countertop Supports Rigid, Heavy Duty - Pro Value Series 72531 76 116

Workstation Bracket 24x24 Primed For Heavy Loads

workstation bracket 24x24 primed describes a rigid, heavy duty Pro Value Series bracket designed for workstation and countertop support. The 24x24 size defines the support arms, which helps carry deeper work surfaces in workbenches, workstations, and similar layouts where substantial projection is needed. A 1,000 lb per pair load rating, when brackets are used as a pair, supports demanding shop and storage applications where concentrated loads are common. The bracket is built from 1/8 inch steel, which provides a solid structural section for frequent use in workbenches, computer stations, and other fixed installations. Primed finish on the steel gives the surface a ready-to-finish base, which matters when the bracket must be painted to match surrounding cabinets or shop fixtures. This bracket sits in the Pro Value Series workstation and countertop bracket class with part number 72531 76 116.

Key Workstation Bracket Details For Daily Use

• The 1,000 lb per pair load rating supports heavy countertops and equipment, which helps maintain stability in workbenches, workstations, garage storage, ADA stations, and computer stations under typical service loads.
• Construction from 1/8 inch steel provides a rigid structure, which reduces flex under load and supports consistent alignment of work surfaces over time.
• Multiple 1/4 inch hole locations provide several mounting points, which lets installers position fasteners to match wall framing or bench structure for secure anchoring.
• The reversible design allows either orientation, which simplifies layout when working around obstacles or matching left and right sides on workstations.
• The 3 inch by 3 inch 45 degree notch on the six larger sizes provides wall cleat and wire run clearance, which helps route services behind the bracket where needed.
• Equal quantities of rights and lefts in each set support balanced installations, which keeps bracket orientation consistent along a run of workstations or counters.

Mounting And Hole Layout For Work Surfaces

This workstation and countertop bracket uses multiple 1/4 inch hole locations, which lets installers select mounting points that tie into studs or structural members for workbenches, garage storage, ADA stations, and computer stations. The pattern of 1/4 inch holes creates flexibility when tying the 1/8 inch steel bracket both to wall structure and to the underside of shelving or countertops, which helps align support with the actual load path of the work surface. Reversible design means the bracket can be flipped to suit the layout, which is useful when adjusting to different wall constructions or clearances in a row of workstations or storage runs.

Using Heavy Duty Brackets In Workstations

Where This 24x24 Workstation Bracket Fits Best

This Pro Value Series workstation and countertop bracket is intended for use in workbenches, workstations, garage storage, ADA stations, and computer stations, which positions it well for both shop and facility environments. The 24x24 format supports deeper counters and work surfaces, which is valuable in garage storage layouts and computer or electronics stations where monitors and equipment sit toward the back. A 1,000 lb per pair load rating gives the bracket the capacity to support substantial materials and tooling in workbench builds, which helps when workpieces, vices, or equipment concentrate weight in specific areas. The 3 inch by 3 inch 45 degree notch provided on the six larger sizes allows clearance for a wall cleat and wire runs, which is important where a continuous cleat supports multiple brackets and where cables must pass behind the support arm along the wall. Because the design is reversible, the same bracket can be placed on either side of a workstation run, which keeps installation straightforward across right- and left-hand positions.

Why These Bracket Details Support Consistent Results

The 1/8 inch steel construction of this rigid, heavy duty bracket provides a solid support member, which helps maintain level work surfaces under the 1,000 lb per pair load rating when brackets are installed in pairs. Multiple 1/4 inch hole locations simplify bracket alignment with framing or bench structure, which reduces layout time and helps achieve a straight row of supports along a workstation, garage storage wall, or ADA station. The reversible design adds flexibility during installation, which is useful when aligning with existing cleats or obstacles while still using the same bracket model on both sides. The 3 inch by 3 inch 45 degree notch on the six larger sizes creates a dedicated space for a wall cleat and wire run clearance, which helps keep electrical or data lines behind the work surface without interference from the support arm. Equal quantities of rights and lefts in each set maintain visual and structural symmetry, which supports even load sharing across a string of workbenches, computer stations, or storage shelves.

Common Questions About Pro Value Workstation Brackets

Selecting This Workstation Bracket For Your Project

The Pro Value Series 72531 76 116 workstation and countertop bracket in 24x24 primed steel provides a 1,000 lb per pair load rating, multiple 1/4 inch mounting hole locations, and a reversible layout, which suit workbenches, garage storage, ADA stations, and computer stations that demand rigid, heavy duty support and straightforward alignment.