Festool Granat 5 inch sanding disc is a 40 grit hook and loop abrasive disc designed for aggressive stock removal and surface prep where a 5 inch pad is used. The disc uses hardened aluminum oxide on a paper backed construction, so it cuts with a sharp, consistent scratch pattern on tough surfaces. A 9-hole pattern aligns with compatible dust extraction pads, which helps keep the surface clear while you sand. The abrasive is Festool Granat, described as the most long-lasting and highest performing abrasive from Festool, so it stays effective over extended sanding runs. It is well suited for nearly all applications, including bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, letting one disc family handle many tasks in the shop.
Granat 5 inch P040 discs use a hook and loop backing, so they attach to sanding pads designed with matching hook and loop faces. The 5 inch diameter fits tools that use this pad size, allowing the abrasive area to match the pad footprint. A 9-hole layout in the disc aligns to pads that share that hole pattern, so dust extraction ports in the pad can pull dust through the disc surface. Because the disc is paper backed, it lays flat against the pad face, which promotes even pressure across the sanding area. Using the 40 grit version at the start of a sanding sequence prepares surfaces for subsequent passes with finer Granat abrasives in the same system.
The Festool 497145 abrasive disc is part of the Granat line, which is described as well suited for nearly all applications, so one disc spec can be used across many material types. It is stated as effective on bare wood, so it can be used for initial shaping and leveling of panels, frames, or solid stock. The disc is also specified for paints and most modern paint systems, meaning it can be used to sand existing coatings during refinishing or to key new coatings between layers. VOC clear coats are listed as an application, which covers many current finishing systems on cabinetry and furniture components. The same disc type is specified for plastic materials and acrylics, so it can support surfacing of engineered parts or fixtures. Solid surface materials and composites are also named, so shops that work on counters or composite fixtures can run the same abrasive family on those jobs.
The disc uses hardened aluminum oxide, which provides a tough cutting grain that maintains its shape under load, supporting a consistent scratch pattern over longer use. A synthetic resin bond is specified, so the grain is held in place by a stable bonding system that resists shedding during sanding. The disc is described as closed coated, which means abrasive grain covers nearly the entire surface, giving dense cutting points across the face for efficient material removal. Being paper backed, the abrasive disc conforms to the pad while staying flat, promoting even contact on the work surface. The description states that Granat is Festool's most long-lasting and highest performing abrasive, which supports extended usage before changing discs and helps maintain uniform surface preparation from start to finish. This consistency across bare wood, paints, modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites allows a shop to rely on a single abrasive line for different project stages.
The Granat 40 grit disc is stated as well suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so it can handle varied shop materials.
The 5 inch diameter matches sanders with 5 inch pads, so the disc covers a common pad size used in cabinetry, furniture, and general woodworking sanding tasks.
Hardened aluminum oxide on the disc gives a tough cutting grain that stays sharp under load, which supports consistent stock removal and surface prep on demanding materials.
The 9 hole pattern matches dust extraction pads with the same layout, allowing dust to be pulled through the disc during sanding, which helps maintain cleaner surfaces.
The 40 grit rating means the disc cuts coarsely, which is useful for fast leveling, stripping finishes, or shaping before moving to finer grits for smoothing.
Closed coated construction means abrasive grain covers nearly the full surface, so the disc offers dense cutting points for efficient material removal on each pass.
The Granat 5 inch P040 disc combines a 5 inch diameter, 40 grit rating, and hook and loop backing, so it matches common sanding pads for coarse work at the start of a sanding sequence. Hardened aluminum oxide, synthetic resin bonding, and closed coated construction give the disc a dense, tough cutting surface for efficient removal. Being part of Festool's most long-lasting and highest performing Granat line, and specified for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, this disc supports many shop sanding tasks with one abrasive spec. Choose this disc when coarse sanding is needed on a 5 inch hook and loop sander across these materials.
Sold In: 1 Box