Festool Granat 5 inch sanding disc uses a 1,000 grit abrasive that refines surfaces to a very fine scratch pattern, which helps when preparing bare wood, paints, or clear coats for final finishing stages where surface quality is critical. The disc uses hardened aluminum oxide on a paper backing, so the cutting surface stays sharp while the backing remains stable, supporting consistent contact with the workpiece. A hook and loop backing lets the disc attach to compatible pads using the hook and loop interface, allowing fast disc changes between grits during multi-step sanding sequences. The abrasive is bonded with a synthetic resin system that holds the grit firmly, so the disc keeps cutting instead of shedding grains prematurely during extended sanding passes. A closed coated design covers the face densely with abrasive, which helps the disc cut evenly across the full 5 inch surface as it moves over wood, coatings, plastics, or solid surface materials.
This 5 inch Festool Granat sanding disc is built as a paper backed abrasive with hook and loop attachment, so it fits sanding pads designed for 5 inch hook and loop discs and matches workflows that rely on fast pad swaps between stages. The 9-hole layout in the disc face aligns with sanders that use a 9-hole pattern, giving those tools defined channels for air and debris movement at the sanding interface. Using hardened aluminum oxide as the abrasive grain gives the disc a cutting surface suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so the same disc series can stay on the sander across different materials in a project. The synthetic resin bond and closed coated design work together to hold abrasive grains tightly and distribute them across the surface, helping the disc maintain a consistent cutting profile from the outer edge to the center during fine-grit sanding passes.
This Festool Granat abrasive disc is specified for nearly all applications listed by the manufacturer, including bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so it supports a wide range of shop and jobsite sanding tasks. On bare wood, the 1,000 grit disc refines earlier sanding marks, bringing the surface to a high level of smoothness ahead of stain or clear finish work. On paints and clear coats, the fine grit and closed coated surface help level minor imperfections while leaving a controlled micro-scratch that prepares the coating for subsequent coats or polishing steps. On plastic materials, acrylics, and composites, the hardened aluminum oxide abrasive works with the paper backing to cut without aggressive gouging, which is important when dialing in final surface quality. On solid surface materials, the disc supports progression steps where a predictable, fine scratch pattern is needed before moving to polishing or further refinement.
The 1,000 grit Festool Granat disc is part of a system where each grit builds toward a final finish, so using this fine grit lets installers and fabricators transition from leveling to finish preparation without changing abrasive families mid-process. Hardened aluminum oxide on a closed coated face helps the disc stay productive across different coatings and substrates, which can reduce disc changes when moving from wood to coating or from one composite panel to another within the same setup. The paper backing and hook and loop attachment support a firm yet quickly changeable interface, letting the sander track flat panels, cabinet parts, or solid surface pieces while still allowing a quick switch from a coarser Granat grit to this 1,000 grit step. The 5 inch diameter and 9-hole pattern match sanders built for that format, which allows dust extraction systems on those tools to pull debris through the aligned holes, helping keep the abrasive face clearer so the fine grit continues cutting rather than riding on dust. Because the disc is designed for use on bare wood, paints, modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, one abrasive specification can stay in regular stock for varied work, supporting more predictable finishing schedules.
This Festool Granat disc uses hardened aluminum oxide abrasive, which provides a sharp, durable cutting surface for sanding wood, coatings, plastics, solid surface materials, acrylics, and composites.
The 1,000 grit rating indicates a very fine abrasive cut, suitable for finish sanding and preparation before final coats or polishing where a smooth, refined surface is needed.
The hook and loop backing lets the Festool Granat disc attach and detach quickly from compatible pads, allowing fast grit changes during multi-step sanding sequences.
The closed coated design covers nearly the entire surface with abrasive, promoting even cutting and helping reduce isolated swirl marks during fine sanding.
This disc is specified for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, covering many shop and jobsite applications.
The 9-hole pattern aligns with sanders using that layout, providing defined paths for dust extraction so the abrasive face stays clearer and continues cutting effectively.
The Festool Granat 5 inch 1,000 grit hook and loop sanding disc with hardened aluminum oxide on a paper backing is built for fine sanding across bare wood, paints, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites. The 5 inch diameter, 9-hole layout, and hook and loop attachment match sanders using that format, so the disc integrates into sanding setups already built around 5 inch hook and loop pads. For installations and fabrication work that require consistent finish prep across several material types, choosing this Festool Granat P1000 disc gives a single abrasive specification that supports both surface refinement and dust extraction performance in a fine-grit step.
Sold In: 1 Box