Festool Granat 5 inch sanding disc is a 5 inch, P800 grit, hook and loop, 9 hole abrasive disc that sands and finishes surfaces in a controlled, consistent way. The P800 grit grade refines surfaces for fine finishing, so you can move from leveling to final prep with less risk of cutting too aggressively on sensitive materials. The 5 inch diameter works with sanders designed for 5 inch discs, giving a familiar footprint for cabinet, millwork, and solid surface work. The 9 hole pattern aligns to compatible 9 hole backing pads, so dust is pulled through the disc surface for a clearer view of the work and a cleaner scratch pattern. The hook and loop backing connects quickly to hook and loop pads, so discs can be changed during a job without tools or clamping steps.
This Festool Granat 5 inch sanding disc uses a hook and loop backing, so it attaches directly to matching hook and loop sanding pads on compatible sanders without additional fastening steps. The 9 hole layout is built into the disc, so when it is aligned with a 9 hole pad, dust is drawn off the work surface through the matching pattern to support visibility and help keep the abrasive cutting. The 5 inch diameter allows the disc to sit fully on 5 inch pads, so the edge of the disc tracks with the edge of the pad for predictable sanding near profiles and edges.
The Festool Granat 5 inch sanding disc is described as well suited for nearly all applications, including bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so one abrasive setup can be carried across typical cabinet, furniture, and surface fabrication work. On bare wood, the P800 grit allows very fine sanding, so surfaces can be refined after prior grit steps before finishing. On paints and most modern paint systems, the P800 grade smooths and levels coatings without the aggressive stock removal of coarser grits, which supports blending and surface preparation between coats. On VOC clear coats, the listed suitability means the abrasive is appropriate for these finishes, so fine sanding of clear layers can be carried out within that system. On plastic materials, solid surface materials, acrylics, and composites, the hardened aluminum oxide grit and closed coated design provide coverage that can address these harder or non-porous substrates in the range described.
The Festool Granat abrasive is described as long-lasting and high performing, so the disc is intended to maintain effective cutting over time, allowing extended sanding passes before disc change-out. The hardened aluminum oxide grain resists rapid wear, so the P800 scratch pattern stays closer to its intended fineness across the life of the disc, which supports even results when finishing multiple parts in sequence. The synthetic resin bonding secures the abrasive to the paper backing, so grit remains in place under normal sanding forces, which helps avoid stray deep scratches from detached particles. The closed coated structure places abrasive grains across the full surface of the disc, so each pass delivers a dense field of cutting points, which is useful when working paints, clear coats, and solid surface materials where uniform scratch patterns are important. The paper backed construction gives a stable base for the abrasive, so the disc stays flat against the pad and workpiece, helping maintain contact across the full 5 inch area.
The Festool Granat 5 inch sanding disc is described as well suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so it covers many shop sanding tasks.
The Festool Granat 5 inch sanding disc in P800 grit provides a very fine cut, so it is suited to finishing and surface refinement steps rather than heavy stock removal.
The Festool Granat 5 inch sanding disc has a 9 hole pattern that, when matched to a 9 hole pad, routes dust through the disc, helping keep the surface clearer as you sand.
The Festool Granat 5 inch sanding disc uses hardened aluminum oxide, which resists breakdown, so the abrasive maintains its cutting ability over longer sanding passes.
The Festool Granat 5 inch sanding disc has a hook and loop backing that attaches to compatible pads, so disc changes are quick and do not require tools.
The Festool Granat 5 inch sanding disc is closed coated, so abrasive grains cover the surface densely, producing an even scratch pattern on the listed materials.
The Festool Granat 5 inch sanding disc, in P800 grit with a hook and loop backing and 9 hole design, ties together fine finishing capability and straightforward mounting for 5 inch, 9 hole pad sanders. Its hardened aluminum oxide, synthetic resin bonding, and closed coated construction are described as long-lasting and high performing across bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites, so one abrasive type can serve many steps in your sanding sequence. When a job calls for a fine, consistent scratch pattern with efficient dust extraction on those materials, this disc provides a targeted match.
Sold In: 1 Box