Hickory Hardware self-close 3/8 inset hinge describes a semi-concealed steel hinge designed for 3/8 inch inset cabinet doors, so the door overlays the face frame by that offset while remaining neatly face mounted. The surface mount design, described as face mount, lets the hinge sit on the face frame instead of needing a cup bore, which suits face-frame cabinets where drilling large holes is not part of the workflow. The self-close function noted in the description pulls the door shut at the end of travel, helping doors settle consistently without drifting open between uses. The black finish referenced in the product data gives a dark, uniform look across the hinge, matching black hardware runs or creating contrast against lighter cabinet finishes in a controlled, intentional way.
The product description identifies this as a face mount hinge, meaning it fastens directly to the cabinet face frame and door surface instead of needing a concealed cup bore, which suits cabinet builds based around straightforward screw-on hardware. The 3/8 inch offset value matches traditional 3/8 inch inset doors, so when the hinge is positioned correctly, the door edge lands at a predictable overlay relative to the frame. The hinge length or diameter is listed as 2-3/4 inch, which helps gauge the hinge scale on the door edge and frame, supporting layout choices for tall or heavy doors where multiple hinges may be used. This model is identified as self-close, so the hinge action pulls the door shut near the closing point, which supports consistent door resting position without relying entirely on magnetic catches.
The SAP description calls this a 3/8 offset hinge, surface mount, self-close, black, which defines it as a good match for face-frame cabinets using 3/8 inch inset doors that sit partially over the frame. By being a semi-concealed hinge in the Face Mount Hinges category, part of the hardware remains visible while much of the mechanism sits along the frame line, giving a traditional cabinet appearance rather than a fully concealed European look. The stated projection of 13/16 inch gives a known stand-off as the door swings, so installers can account for nearby doors and frames when laying out rows of cabinets. With a width of 2-3/16 inch and length or diameter of 2-3/4 inch, the hinge occupies a moderate footprint on the frame and door edge, which balances holding power with available stile width on standard residential cabinets.
The 3/8 inch offset dimension is central to the hinge design, and it lets installers repeat the same reveal and overlay across multiple doors by referencing that known inset, which reduces alignment adjustments from one opening to the next. The face mount style described in the web data keeps work focused on screw-on installation locations, so door and frame edges can be marked, predrilled, and fastened in a straightforward sequence without cup-boring equipment. The self-close function built into this hinge style brings the door tight at the end of the swing, which helps rows of cabinets present with doors resting fully closed instead of sitting slightly ajar. The steel material and black finish combination supports a consistent look and feel along the hinge line, so once alignment is dialed in on the first door, the same reference points can be used across the run for predictable, repeatable cabinet results.
The hinge is described with a 3/8 inch offset and as a 3/8 inch inset face mount hinge, so it is intended for 3/8 inch inset cabinet doors overlaying a face frame by that amount.
The hinge is identified as self-close, so its closing action pulls the door shut near the end of travel, helping doors stay fully closed in regular cabinet use.
Face mount in the description means the hinge fastens to the surface of the cabinet face frame and door, so installation uses screw-on mounting rather than a bored hinge cup.
The listed 13/16 inch projection defines how far the hinge and door extend from the frame, which helps plan clearances when cabinets sit near walls, appliances, or adjacent doors.
The 3/8 inch offset sets the inset and overlay relationship between door and frame, allowing installers to match traditional 3/8 inch inset layouts and keep door reveals consistent.
The web description lists steel material with a black finish, giving a sturdy hinge body and a uniform dark appearance that coordinates with other black cabinet hardware.
The web and SAP descriptions present this Belwith Keeler semi-concealed hinge as a steel, black, self-close, 3/8 inch offset face mount option, aligning it with 3/8 inch inset, face-frame cabinet work. When that combination of offset, surface mounting, and self-closing action matches the door layout on the job, using the same P143-BL hinge across a run keeps hardware type, finish, and operation consistent from opening to opening.