Hickory Hardware self-close hinge is a semi-concealed, variable overlay, face mount hinge in polished chrome that controls how a cabinet door hangs and closes, which helps deliver consistent alignment on face-frame cabinet runs. This hinge is part of the 20010 collection, so matching additional hinges in the same line keeps appearance and function consistent across a project. The hinge is made from steel, which provides a solid metal joint between door and frame for everyday cabinet use. Its self-close function pulls the door shut at the end of travel, which helps doors sit against the frame without manual latching on each close. The polished chrome finish provides a bright, reflective surface on the visible hinge leaves, which suits chrome-forward hardware layouts in kitchens, baths, and shop storage.
This face mount hinge is designed to fasten to the cabinet face frame, which sets up a direct transfer of door load into the frame for typical face-frame construction. The screw-on description indicates that the hinge uses screw fastening, so the mounting pattern on the leaves defines the drilling layout for both frame and door. The 8-32 x 1 inch screw size describes the thread and length used for fastening, which guides bit selection and pre-drilling in wood or composite materials. The 3/8 inch offset and variable overlay design work together to position the door relative to the frame, which gives the installer defined reference points when aligning reveals along a run of doors. The hinge projection of 13/16 inch influences how the door swings past the frame edge, which helps coordinate clearances with neighboring cabinets or walls.
This semi-concealed face mount hinge is suited to face-frame cabinets where part of the hinge remains visible by design, which fits projects that use exposed hinge leaves as part of the cabinet style. The polished chrome finish supports installations where other visible hardware, such as pulls and knobs, also use polished chrome, which keeps the overall hardware appearance unified. The hinge length of 2-3/4 inches and width of 2-3/16 inches suit typical cabinet door sizes, which helps balance mechanical support with a compact footprint on the frame and door edge. The hinge offset of 3/8 inch is appropriate for overlay door conditions defined for this design, which supports consistent gaps and keeps doors running parallel to adjacent faces in a bank of cabinets. The self-close function is useful on frequently used doors, because the closing action helps pull the door tight to the frame at the end of travel, which can reduce doors resting partially open in daily use.
The steel construction of this hinge provides a sturdy connection between cabinet door and frame, which supports repeatable performance when doors are opened and closed regularly across a kitchen or shop installation. The face mount design gives a flat, accessible mounting surface on the frame, which simplifies repeat drilling patterns when laying out multiple cabinets using the same hinge type. Variable overlay capability means a single hinge model can serve several overlay conditions within its design range, which can streamline hardware planning across upper and lower cabinets that share a consistent style. The 13/16 inch projection keeps the hinge operating within a defined envelope off the mounting surface, which helps installers coordinate hinge position with interior roll-outs or adjacent doors to avoid interference. The polished chrome finish also provides a clear visual reference when aligning hinges along a frame, because the reflective surface highlights any misalignment, which can support cleaner visual lines after installation.
The P144-26 model is a semi-concealed, variable overlay, face mount hinge, so it mounts on a face-frame cabinet while leaving part of the hinge visible for a traditional exposed-hinge look.
The self-close feature on this hinge pulls the door shut near the end of travel, which helps doors rest against the frame and reduces partially open positions in normal cabinet use.
This hinge is made from steel with a polished chrome finish, which provides a solid metal joint and a bright, reflective appearance on the exposed hinge surfaces.
The 3/8 inch offset defines how the door edge sits relative to the face frame, which guides door sizing and hinge location so overlays and reveals remain consistent.
The 2-3/4 inch length and 2-3/16 inch width describe the hinge footprint, which helps plan hinge spacing on taller doors and layout on face frames or door edges.
The 8-32 x 1 inch screw size identifies the thread and length used with this hinge, which guides drilling and fastening choices when mounting to wood or composite cabinet components.
This Hickory Hardware self-close hinge in polished chrome combines semi-concealed construction, variable overlay capability, and face mount installation, which suits many face-frame cabinet layouts. The defined dimensions, 3/8 inch offset, and 13/16 inch projection give clear reference points for door sizing and frame drilling. The steel material and P144-26 designation clearly identify the hinge within the Belwith Keeler line, which supports consistent hardware selection across a full room of cabinets. For projects calling for polished chrome, semi-concealed face mount hinges with self-close action, this model aligns cabinet appearance with functional door control.